Hi Giovanny how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/> the error i get when i run the /usr/local/freeswitch/bin/fs_cli i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10% i dont know that is normal when freeswitch run with skypopen module how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users Thank you Ha On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com> wrote:
the skypopen works fine but i get error below in the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR about a failed action (probably TRYING to HANGUP A CALL), no problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a debug message that explains we tried to hangup a skype call that the skype client closed before. Is just to be double sure that we try to close it anyway. The debug message is just an explanation.
How to fix it
nothing to fix, no problems here. -giovanni -- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
Yes, remove that line, then do reloadxml and reload mod_skypopen to pick up the new config. Or restart FS.
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
Are you using the dummy sound driver? That's meant to reduce the CPU usage, but I don't know how much. % will also depend on what CPU you're using.
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
1) Visit that link 2) Enter your email and click 'Unsubscribe or edit options' near the bottom 3) Enter your password (there's a reminder button that'll email it to you if you don't know it) 4) Scroll down to the 'Your FreeSWITCH-users Subscription Options' section 5) Flip the 'Set Digest Mode' setting to Off and click 'Submit my changes' -Steve On 7 December 2010 12:29, ha do <haloha201@yahoo.com> wrote:
Hi Giovanny
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
the error i get when i run the /usr/local/freeswitch/bin/fs_cli
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Thank you Ha
On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com> wrote:
the skypopen works fine but i get error below in the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR about a failed action (probably TRYING to HANGUP A CALL), no problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a debug message that explains we tried to hangup a skype call that the skype client closed before. Is just to be double sure that we try to close it anyway. The debug message is just an explanation.
How to fix it
nothing to fix, no problems here.
-giovanni
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Steven yes, i use the snd-dummy as guide in startskype.sh script thank you for your guide, it works now :D Ha` --- On Tue, 12/7/10, Steven Ayre <steveayre@gmail.com> wrote:
From: Steven Ayre <steveayre@gmail.com> Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, December 7, 2010, 6:40 AM
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
Yes, remove that line, then do reloadxml and reload mod_skypopen to pick up the new config. Or restart FS.
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
Are you using the dummy sound driver? That's meant to reduce the CPU usage, but I don't know how much. % will also depend on what CPU you're using.
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
1) Visit that link 2) Enter your email and click 'Unsubscribe or edit options' near the bottom 3) Enter your password (there's a reminder button that'll email it to you if you don't know it) 4) Scroll down to the 'Your FreeSWITCH-users Subscription Options' section 5) Flip the 'Set Digest Mode' setting to Off and click 'Submit my changes'
-Steve
On 7 December 2010 12:29, ha do <haloha201@yahoo.com> wrote:
Hi Giovanny
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
the error i get when i run the /usr/local/freeswitch/bin/fs_cli
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Thank you Ha
On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com> wrote:
the skypopen works fine but i get error below in the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR about a failed action (probably TRYING to HANGUP A CALL), no problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a debug message that explains we tried to hangup a skype call that the skype client closed before. Is just to be double sure that we try to close it anyway. The debug message is just an explanation.
How to fix it
nothing to fix, no problems here.
-giovanni
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I am getting 5-6% for each skype call and 1% idle instance, on my Q6600. It's normal, 20 concurrent calls would be way enough for most people. If you want more, can scale to more servers. Jian On Tue, Dec 7, 2010 at 9:52 AM, ha do <haloha201@yahoo.com> wrote:
Hi Steven
yes, i use the snd-dummy as guide in startskype.sh script
thank you for your guide, it works now :D Ha`
--- On Tue, 12/7/10, Steven Ayre <steveayre@gmail.com> wrote:
From: Steven Ayre <steveayre@gmail.com> Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, December 7, 2010, 6:40 AM
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
Yes, remove that line, then do reloadxml and reload mod_skypopen to pick up the new config. Or restart FS.
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
Are you using the dummy sound driver? That's meant to reduce the CPU usage, but I don't know how much. % will also depend on what CPU you're using.
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
1) Visit that link 2) Enter your email and click 'Unsubscribe or edit options' near the bottom 3) Enter your password (there's a reminder button that'll email it to you if you don't know it) 4) Scroll down to the 'Your FreeSWITCH-users Subscription Options' section 5) Flip the 'Set Digest Mode' setting to Off and click 'Submit my changes'
-Steve
On 7 December 2010 12:29, ha do <haloha201@yahoo.com> wrote:
Hi Giovanny
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
the error i get when i run the /usr/local/freeswitch/bin/fs_cli
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Thank you Ha
On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com> wrote:
the skypopen works fine but i get error below in the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR about a failed action (probably TRYING to HANGUP A CALL), no problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a debug message that explains we tried to hangup a skype call that the skype client closed before. Is just to be double sure that we try to close it anyway. The debug message is just an explanation.
How to fix it
nothing to fix, no problems here.
-giovanni
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi Jian so my freeswitch performance is normal state when run with skypopen :D Thank you Ha --- On Tue, 12/7/10, Jian Ren <renjian@gmail.com> wrote: From: Jian Ren <renjian@gmail.com> Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, December 7, 2010, 2:14 PM I am getting 5-6% for each skype call and 1% idle instance, on my Q6600. It's normal, 20 concurrent calls would be way enough for most people. If you want more, can scale to more servers. Jian On Tue, Dec 7, 2010 at 9:52 AM, ha do <haloha201@yahoo.com> wrote: Hi Steven yes, i use the snd-dummy as guide in startskype.sh script thank you for your guide, it works now :D Ha` --- On Tue, 12/7/10, Steven Ayre <steveayre@gmail.com> wrote:
From: Steven Ayre <steveayre@gmail.com>
Subject: Re: [Freeswitch-users] get error on skypopen module
To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org>
Date: Tuesday, December 7, 2010, 6:40 AM
how to turn off the debug??
remove the below line in skypopen.xml.conf
<param name="debug" value="8"/>
Yes, remove that line, then do reloadxml and reload
mod_skypopen to
pick up the new config. Or restart FS.
i do check the CPU performance so 1 call from/to skype
client it will cost 5% CPU of server
if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with
skypopen module
Are you using the dummy sound driver? That's meant to
reduce the CPU
usage, but I don't know how much. % will also depend on
what CPU
you're using.
how do i change the
Would you like to receive list mail batched in a daily
digest?
from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
1) Visit that link
2) Enter your email and click 'Unsubscribe or edit options'
near the bottom
3) Enter your password (there's a reminder button that'll
email it to
you if you don't know it)
4) Scroll down to the 'Your FreeSWITCH-users Subscription
Options' section
5) Flip the 'Set Digest Mode' setting to Off and click
'Submit my changes'
-Steve
On 7 December 2010 12:29, ha do <haloha201@yahoo.com>
wrote:
Hi Giovanny
how to turn off the debug?? remove the below line in
skypopen.xml.conf
<param name="debug" value="8"/>
the error i get when i run the
/usr/local/freeswitch/bin/fs_cli
i do check the CPU performance so 1 call from/to skype
client it will cost 5% CPU of server
if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with
skypopen module
how do i change the
Would you like to receive list mail batched in a daily
digest?
from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Thank you
Ha
On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com>
wrote:
the skypopen works fine but i get error below in
the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR
about a failed action (probably TRYING to HANGUP A CALL), no
problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a
debug message that
explains we tried to hangup a skype call that the
skype client closed
before. Is just to be double sure that we try to close
it anyway. The
debug message is just an explanation.
How to fix it
nothing to fix, no problems here.
-giovanni
--
Sincerely,
Giovanni Maruzzelli
Cell : +39-347-2665618
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________
FreeSWITCH-users mailing list
FreeSWITCH-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -----Inline Attachment Follows----- _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, I got the same. Unless Giovanni doesn't agree :-). Jian On Tue, Dec 7, 2010 at 9:46 PM, ha do <haloha201@yahoo.com> wrote:
Hi Jian
so my freeswitch performance is normal state when run with skypopen :D
Thank you Ha
--- On *Tue, 12/7/10, Jian Ren <renjian@gmail.com>* wrote:
From: Jian Ren <renjian@gmail.com>
Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, December 7, 2010, 2:14 PM
I am getting 5-6% for each skype call and 1% idle instance, on my Q6600. It's normal, 20 concurrent calls would be way enough for most people. If you want more, can scale to more servers.
Jian
On Tue, Dec 7, 2010 at 9:52 AM, ha do <haloha201@yahoo.com<http://mc/compose?to=haloha201@yahoo.com>
wrote:
Hi Steven
yes, i use the snd-dummy as guide in startskype.sh script
thank you for your guide, it works now :D Ha`
--- On Tue, 12/7/10, Steven Ayre <steveayre@gmail.com<http://mc/compose?to=steveayre@gmail.com>> wrote:
From: Steven Ayre <steveayre@gmail.com<http://mc/compose?to=steveayre@gmail.com>
Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org<http://mc/compose?to=freeswitch-users@lists.freeswitch.org>
Date: Tuesday, December 7, 2010, 6:40 AM
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
Yes, remove that line, then do reloadxml and reload mod_skypopen to pick up the new config. Or restart FS.
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
Are you using the dummy sound driver? That's meant to reduce the CPU usage, but I don't know how much. % will also depend on what CPU you're using.
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
1) Visit that link 2) Enter your email and click 'Unsubscribe or edit options' near the bottom 3) Enter your password (there's a reminder button that'll email it to you if you don't know it) 4) Scroll down to the 'Your FreeSWITCH-users Subscription Options' section 5) Flip the 'Set Digest Mode' setting to Off and click 'Submit my changes'
-Steve
On 7 December 2010 12:29, ha do <haloha201@yahoo.com<http://mc/compose?to=haloha201@yahoo.com>
wrote:
Hi Giovanny
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
the error i get when i run the /usr/local/freeswitch/bin/fs_cli
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Thank you Ha
On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com<http://mc/compose?to=haloha201@yahoo.com>
wrote:
the skypopen works fine but i get error below in the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR about a failed action (probably TRYING to HANGUP A CALL), no problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a debug message that explains we tried to hangup a skype call that the skype client closed before. Is just to be double sure that we try to close it anyway. The debug message is just an explanation.
How to fix it
nothing to fix, no problems here.
-giovanni
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yep, I'm getting the same performances on a Q6600. I'm trying since very longtime to come out with something to radically lower the load on the machine, but until now I've wasted my time on false tracks. As soon as I have a breakthrough, I'll communicate a lot ;), but maybe I just hit the wall, and no further performance gains are possible. On a Q6600 I believe you can have maybe 30 or 40 concurrent calls, but I highly doubt you can have more than 40 with the current skype-skypopen-alsadummy. I'm experimenting with skype.static.oss and a new oss driver I wrote, but no joy for now. -giovanni On Wed, Dec 8, 2010 at 5:45 AM, Jian Ren <renjian@gmail.com> wrote:
Yes, I got the same. Unless Giovanni doesn't agree :-). Jian
On Tue, Dec 7, 2010 at 9:46 PM, ha do <haloha201@yahoo.com> wrote:
Hi Jian
so my freeswitch performance is normal state when run with skypopen :D
Thank you Ha
--- On *Tue, 12/7/10, Jian Ren <renjian@gmail.com>* wrote:
From: Jian Ren <renjian@gmail.com>
Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org> Date: Tuesday, December 7, 2010, 2:14 PM
I am getting 5-6% for each skype call and 1% idle instance, on my Q6600. It's normal, 20 concurrent calls would be way enough for most people. If you want more, can scale to more servers.
Jian
On Tue, Dec 7, 2010 at 9:52 AM, ha do <haloha201@yahoo.com<http://mc/compose?to=haloha201@yahoo.com>
wrote:
Hi Steven
yes, i use the snd-dummy as guide in startskype.sh script
thank you for your guide, it works now :D Ha`
--- On Tue, 12/7/10, Steven Ayre <steveayre@gmail.com<http://mc/compose?to=steveayre@gmail.com>> wrote:
From: Steven Ayre <steveayre@gmail.com<http://mc/compose?to=steveayre@gmail.com>
Subject: Re: [Freeswitch-users] get error on skypopen module To: "FreeSWITCH Users Help" <freeswitch-users@lists.freeswitch.org<http://mc/compose?to=freeswitch-users@lists.freeswitch.org>
Date: Tuesday, December 7, 2010, 6:40 AM
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
Yes, remove that line, then do reloadxml and reload mod_skypopen to pick up the new config. Or restart FS.
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
Are you using the dummy sound driver? That's meant to reduce the CPU usage, but I don't know how much. % will also depend on what CPU you're using.
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
1) Visit that link 2) Enter your email and click 'Unsubscribe or edit options' near the bottom 3) Enter your password (there's a reminder button that'll email it to you if you don't know it) 4) Scroll down to the 'Your FreeSWITCH-users Subscription Options' section 5) Flip the 'Set Digest Mode' setting to Off and click 'Submit my changes'
-Steve
On 7 December 2010 12:29, ha do <haloha201@yahoo.com<http://mc/compose?to=haloha201@yahoo.com>
wrote:
Hi Giovanny
how to turn off the debug?? remove the below line in skypopen.xml.conf <param name="debug" value="8"/>
the error i get when i run the /usr/local/freeswitch/bin/fs_cli
i do check the CPU performance so 1 call from/to skype client it will cost 5% CPU of server if 2 calls, CPU will be 10%
i dont know that is normal when freeswitch run with skypopen module
how do i change the Would you like to receive list mail batched in a daily digest? from yes to no in http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
Thank you Ha
On Tue, Dec 7, 2010 at 5:34 AM, ha do <haloha201@yahoo.com<http://mc/compose?to=haloha201@yahoo.com>
wrote:
the skypopen works fine but i get error below in the debug mode
don't run in debug mode if you are not debugging :)
[interface1 ][IDLE,IDLE] Skype got ERROR about a failed action (probably TRYING to HANGUP A CALL), no problem: |||ERROR 559 CALL: Action failed|||
as is clearly written, this is not a problem. Is a debug message that explains we tried to hangup a skype call that the skype client closed before. Is just to be double sure that we try to close it anyway. The debug message is just an explanation.
How to fix it
nothing to fix, no problems here.
-giovanni
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-----Inline Attachment Follows-----
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<http://mc/compose?to=FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
participants (4)
-
Giovanni Maruzzelli
-
ha do
-
Jian Ren
-
Steven Ayre