Hello, I have FS ver. 1.0.6, Windows Vista Ultimate and Skype 4.2.0.169 for Windows. (user1) On a laptop I have Windows Vista Home and Skype 4.1.0.179 (user2) When I make a call from user2 to user1 I listen the IVR menu and see the activity on FS console. The problem is that when I click on the skype's phone keyboard I can not listen to any DTMF signal and user1 is not receiving DTMF signals ( the IVR menu is not interrupted). Is there a configuration change I have to do in order to make skype send/receive dtmf signals or do I need another type of skype client? The info in the document for mod_skypopen is not very clear. Thank you. Luis.
that is not true ;) Is very clear, indeed (I wrote it ;) ) look for dtmf in all the wiki page, you'll find some parameter to be used. If it's still unclear, please rewrite here, and describe fully what you'r doing and what is the problem -giovanni On Thu, Jul 8, 2010 at 9:03 PM, <luixsansan@hotmail.com> wrote:
Hello,
I have FS ver. 1.0.6, Windows Vista Ultimate and Skype 4.2.0.169 for Windows. (user1)
On a laptop I have Windows Vista Home and Skype 4.1.0.179 (user2)
When I make a call from user2 to user1 I listen the IVR menu and see the activity on FS console. The problem is that when I click on the skype's phone keyboard I can not listen to any DTMF signal and user1 is not receiving DTMF signals ( the IVR menu is not interrupted).
Is there a configuration change I have to do in order to make skype send/receive dtmf signals or do I need another type of skype client?
The info in the document for mod_skypopen is not very clear.
Thank you.
Luis. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Hello, I use the sample config file <configuration name="skypopen.conf" description="Skypopen Configuration"> <global_settings> <param name="debug" value="8"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <param name="destination" value="5000"/> <param name="skype_user" value="user1"/> <param name="report_incoming_chatmessages" value="true"/> <param name="setsockopt" value="false"/> <param name="silent_mode" value="false"/> <param name="write_silence_when_idle" value="true"/> </global_settings> <!-- one entry here per each skypopen interface --> <per_interface_settings> <interface id="1" name="user1"> <param name="skype_user" value="user1"/> </interface> </per_interface_settings> </configuration> then, when I call from another Skype Client in other computer to user1 extension 5000 answers and I listen to the IVR demo, I pulse an extension or a number of the menu options but nothing happens, I keep listening the menu until FS hangs up for timeout. by the way, about Dialplan in the document I can read "There are a few simple examples given in the "default.xml" dialplan located in mod_skypopen/configs/" I do not see any dialplan example. Regards. Luis. -------------------------------------------------- From: "Giovanni Maruzzelli" <gmaruzz@celliax.org> Sent: Thursday, July 08, 2010 9:47 PM To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] dtmf in Skype
that is not true ;) Is very clear, indeed (I wrote it ;) )
look for dtmf in all the wiki page, you'll find some parameter to be used.
If it's still unclear, please rewrite here, and describe fully what you'r doing and what is the problem
-giovanni
On Thu, Jul 8, 2010 at 9:03 PM, <luixsansan@hotmail.com> wrote:
Hello,
I have FS ver. 1.0.6, Windows Vista Ultimate and Skype 4.2.0.169 for Windows. (user1)
On a laptop I have Windows Vista Home and Skype 4.1.0.179 (user2)
When I make a call from user2 to user1 I listen the IVR menu and see the activity on FS console. The problem is that when I click on the skype's phone keyboard I can not listen to any DTMF signal and user1 is not receiving DTMF signals ( the IVR menu is not interrupted).
Is there a configuration change I have to do in order to make skype send/receive dtmf signals or do I need another type of skype client?
The info in the document for mod_skypopen is not very clear.
Thank you.
Luis. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Fri, Jul 9, 2010 at 12:47 PM, <luixsansan@hotmail.com> wrote: config file is ok
then, when I call from another Skype Client in other computer to user1 extension 5000 answers and I listen to the IVR demo, I pulse an extension or a number of the menu options but nothing happens, I keep listening the menu until FS hangs up for timeout.
this is very strange, because the skype clients sends the dtmf as out of band signaling, so it is always seen by skypopen (eg: no fiddling with audio dtmf recognition). can you please open a Jira issue? and please do this: 1) if you have put mod_skypopen in modules.conf.xml, please comment it out (let's not start it when we don't see it ;) ) 2) shutdown and restart FS 3) from its command line: 4) "fsctl loglevel 7" 5) "console loglevel 7" 6) "load mod_skypopen" 7) receive the call and press some dtmf in the remote skype client keypad and attach to the Jira all the output, since the beginning (attach as a file, would be better than paste as comment.
-------------------------------------------------- From: "Giovanni Maruzzelli" <gmaruzz@celliax.org> Sent: Thursday, July 08, 2010 9:47 PM To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] dtmf in Skype
that is not true ;) Is very clear, indeed (I wrote it ;) )
look for dtmf in all the wiki page, you'll find some parameter to be used.
If it's still unclear, please rewrite here, and describe fully what you'r doing and what is the problem
-giovanni
On Thu, Jul 8, 2010 at 9:03 PM, <luixsansan@hotmail.com> wrote:
Hello,
I have FS ver. 1.0.6, Windows Vista Ultimate and Skype 4.2.0.169 for Windows. (user1)
On a laptop I have Windows Vista Home and Skype 4.1.0.179 (user2)
When I make a call from user2 to user1 I listen the IVR menu and see the activity on FS console. The problem is that when I click on the skype's phone keyboard I can not listen to any DTMF signal and user1 is not receiving DTMF signals ( the IVR menu is not interrupted).
Is there a configuration change I have to do in order to make skype send/receive dtmf signals or do I need another type of skype client?
The info in the document for mod_skypopen is not very clear.
Thank you.
Luis. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Hello Giovanni, I have made more tests and what I found is that when I made the call from skypeClient to skypeClient I can not open a keyboard to send dtmf signals ( I have not found any option in the configuration that allows a keyboard), it seems that other version of skype is needed for this to work. Do you know wich? My error was that once the call was established I opened a keyboard that is used to make calls to the PSTN. Then I need a Dialplan to send an incoming call to the extension where skype is receiving calls. Is this correct? Kind regards. Luis. -------------------------------------------------- From: "Giovanni Maruzzelli" <gmaruzz@celliax.org> Sent: Friday, July 09, 2010 1:22 PM To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] dtmf in Skype
On Fri, Jul 9, 2010 at 12:47 PM, <luixsansan@hotmail.com> wrote:
config file is ok
then, when I call from another Skype Client in other computer to user1 extension 5000 answers and I listen to the IVR demo, I pulse an extension or a number of the menu options but nothing happens, I keep listening the menu until FS hangs up for timeout.
this is very strange, because the skype clients sends the dtmf as out of band signaling, so it is always seen by skypopen (eg: no fiddling with audio dtmf recognition).
can you please open a Jira issue?
and please do this:
1) if you have put mod_skypopen in modules.conf.xml, please comment it out (let's not start it when we don't see it ;) ) 2) shutdown and restart FS 3) from its command line: 4) "fsctl loglevel 7" 5) "console loglevel 7" 6) "load mod_skypopen" 7) receive the call and press some dtmf in the remote skype client keypad
and attach to the Jira all the output, since the beginning (attach as a file, would be better than paste as comment.
-------------------------------------------------- From: "Giovanni Maruzzelli" <gmaruzz@celliax.org> Sent: Thursday, July 08, 2010 9:47 PM To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] dtmf in Skype
that is not true ;) Is very clear, indeed (I wrote it ;) )
look for dtmf in all the wiki page, you'll find some parameter to be used.
If it's still unclear, please rewrite here, and describe fully what you'r doing and what is the problem
-giovanni
On Thu, Jul 8, 2010 at 9:03 PM, <luixsansan@hotmail.com> wrote:
Hello,
I have FS ver. 1.0.6, Windows Vista Ultimate and Skype 4.2.0.169 for Windows. (user1)
On a laptop I have Windows Vista Home and Skype 4.1.0.179 (user2)
When I make a call from user2 to user1 I listen the IVR menu and see the activity on FS console. The problem is that when I click on the skype's phone keyboard I can not listen to any DTMF signal and user1 is not receiving DTMF signals ( the IVR menu is not interrupted).
Is there a configuration change I have to do in order to make skype send/receive dtmf signals or do I need another type of skype client?
The info in the document for mod_skypopen is not very clear.
Thank you.
Luis. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Fri, Jul 9, 2010 at 6:46 PM, <luixsansan@hotmail.com> wrote:
I have made more tests and what I found is that when I made the call from skypeClient to skypeClient I can not open a keyboard to send dtmf signals ( I have not found any option in the configuration that allows a keyboard), it seems that other version of skype is needed for this to work. Do you know wich?
I don't understand this. We all are using the same skypeclient in windows, and you have a little arrow besides the horizontal volume slider. You click on that arrow after having a live call connected, and a dtmf keyboard appear. Why don't you have looked in the skypeclient help or googled for this? :) The extension where an incoming call will go is defined in the skypopen.conf.xml file Hope this helps, -giovanni
Kind regards.
Luis.
-------------------------------------------------- From: "Giovanni Maruzzelli" <gmaruzz@celliax.org> Sent: Friday, July 09, 2010 1:22 PM To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] dtmf in Skype
On Fri, Jul 9, 2010 at 12:47 PM, <luixsansan@hotmail.com> wrote:
config file is ok
then, when I call from another Skype Client in other computer to user1 extension 5000 answers and I listen to the IVR demo, I pulse an extension or a number of the menu options but nothing happens, I keep listening the menu until FS hangs up for timeout.
this is very strange, because the skype clients sends the dtmf as out of band signaling, so it is always seen by skypopen (eg: no fiddling with audio dtmf recognition).
can you please open a Jira issue?
and please do this:
1) if you have put mod_skypopen in modules.conf.xml, please comment it out (let's not start it when we don't see it ;) ) 2) shutdown and restart FS 3) from its command line: 4) "fsctl loglevel 7" 5) "console loglevel 7" 6) "load mod_skypopen" 7) receive the call and press some dtmf in the remote skype client keypad
and attach to the Jira all the output, since the beginning (attach as a file, would be better than paste as comment.
-------------------------------------------------- From: "Giovanni Maruzzelli" <gmaruzz@celliax.org> Sent: Thursday, July 08, 2010 9:47 PM To: <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] dtmf in Skype
that is not true ;) Is very clear, indeed (I wrote it ;) )
look for dtmf in all the wiki page, you'll find some parameter to be used.
If it's still unclear, please rewrite here, and describe fully what you'r doing and what is the problem
-giovanni
On Thu, Jul 8, 2010 at 9:03 PM, <luixsansan@hotmail.com> wrote:
Hello,
I have FS ver. 1.0.6, Windows Vista Ultimate and Skype 4.2.0.169 for Windows. (user1)
On a laptop I have Windows Vista Home and Skype 4.1.0.179 (user2)
When I make a call from user2 to user1 I listen the IVR menu and see the activity on FS console. The problem is that when I click on the skype's phone keyboard I can not listen to any DTMF signal and user1 is not receiving DTMF signals ( the IVR menu is not interrupted).
Is there a configuration change I have to do in order to make skype send/receive dtmf signals or do I need another type of skype client?
The info in the document for mod_skypopen is not very clear.
Thank you.
Luis. _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
participants (2)
-
Giovanni Maruzzelli
-
luixsansan＠hotmail.com