We have a client with a Mitel PBX with a PRI connected to it. We are deploying a freeswitch box that will do some autodialing tasks for them. Is there a way to share the PRI between the two systems? If nothing else, I'm pretty sure I can put a two line interface card in the Freeswitch server, plug the pri into it, then connected the other interface to the Mitel box, but that would make our box a point of failure and I'd like to avoid that if possible.
On Wed, Sep 21, 2011 at 6:20 PM, <fssupport@highergear.com> wrote:
We have a client with a Mitel PBX with a PRI connected to it. We are deploying a freeswitch box that will do some autodialing tasks for them. Is there a way to share the PRI between the two systems? If nothing else, I'm pretty sure I can put a two line interface card in the Freeswitch server, plug the pri into it, then connected the other interface to the Mitel box, but that would make our box a point of failure and I'd like to avoid that if possible.
It is not possible to "split" or "share" a PRI interface with passive components, your three options are a/ put a second PRI interface onto "your" system, and configure it to route inbound calls to the Mitel system and outbound calls from the Mitel system b/ put a second PRI interface onto the Mitel, and configure it as per a/ but with your system instead c/ purchase a device with 3 PRI interfaces that can route inbound calls and outbound calls appropriately as per a/ and b/
On Wed, Sep 21, 2011 at 6:20 PM, <fssupport@highergear.com> wrote:
We have a client with a Mitel PBX with a PRI connected to it. We are deploying a freeswitch box that will do some autodialing tasks for them. Is there a way to share the PRI between the two systems? If nothing else, I'm pretty sure I can put a two line interface card in the Freeswitch server, plug the pri into it, then connected the other interface to the Mitel box, but that would make our box a point of failure and I'd like to avoid that if possible.
It is not possible to "split" or "share" a PRI interface with passive components, your three options are
a/ put a second PRI interface onto "your" system, and configure it to route inbound calls to the Mitel system and outbound calls from the Mitel system b/ put a second PRI interface onto the Mitel, and configure it as per a/ but with your system instead c/ purchase a device with 3 PRI interfaces that can route inbound calls and outbound calls appropriately as per a/ and b/
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks for your response on this. With regards to option c, I found this: http://www.patapsco.co.uk/Products/Liberator/ISDN_Splitter_ISDN-Converter_Li... I think this might be what I need?
On Thu, Sep 22, 2011 at 2:23 PM, <fssupport@highergear.com> wrote:
On Wed, Sep 21, 2011 at 6:20 PM, <fssupport@highergear.com> wrote:
We have a client with a Mitel PBX with a PRI connected to it. We are deploying a freeswitch box that will do some autodialing tasks for them. Is there a way to share the PRI between the two systems? If nothing else, I'm pretty sure I can put a two line interface card in the Freeswitch server, plug the pri into it, then connected the other interface to the Mitel box, but that would make our box a point of failure and I'd like to avoid that if possible.
It is not possible to "split" or "share" a PRI interface with passive components, your three options are
a/ put a second PRI interface onto "your" system, and configure it to route inbound calls to the Mitel system and outbound calls from the Mitel system b/ put a second PRI interface onto the Mitel, and configure it as per a/ but with your system instead c/ purchase a device with 3 PRI interfaces that can route inbound calls and outbound calls appropriately as per a/ and b/
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks for your response on this. With regards to option c, I found this: http://www.patapsco.co.uk/Products/Liberator/ISDN_Splitter_ISDN-Converter_Li... I think this might be what I need?
this might be more appropriate http://www.patapsco.co.uk/Products/Liberator/Liberator_Q_4-Port_PRI_ISDN_Swi... however a 2nd PRI card in the Mitel would probably be more cost effective
We use an AdTran product to share a single PRI among our test servers. -----Original Message----- From: fssupport@highergear.com [mailto:fssupport@highergear.com] Sent: Wednesday, September 21, 2011 10:21 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Share PRI line? We have a client with a Mitel PBX with a PRI connected to it. We are deploying a freeswitch box that will do some autodialing tasks for them. Is there a way to share the PRI between the two systems? If nothing else, I'm pretty sure I can put a two line interface card in the Freeswitch server, plug the pri into it, then connected the other interface to the Mitel box, but that would make our box a point of failure and I'd like to avoid that if possible.
participants (3)
-
fssupport＠highergear.com
-
Robert Hadley
-
shouldbe q931