On Jul 14, 2009, at 9:20 PM, DigiLord wrote:

Hello all, I am getting my feet wet with FreeSwitch by migrating my Asterisk box over. I have run into a few things that I am not sure how to accomplish.

I have a Grandstream GXW4104 with one analog line connected. I have it connected and I am able to receive calls on my Polycom 501 (ext 2101) that is registered to the FreeSwitch server. The one problem is that CallerID is not the CallerID from the caller, it's the CallerID from the Grandstream device (ext 2100).

How is the callerid passed on this device?

On the same device there is HORRIBLE echo. I have set echo cancellation on the device to enebled and disabled to no avail. Under Asterisk there was no echo.

If it didn't have echo on asterisk it shouldn't have echo on FreeSWITCH, Can you describe the echo better? Are you using speaker phone? What codecs?

I setup the device as a provider. Was that the right way to accomplish connecting this device to FS?

Is there a way to enable sending an e-mail containing my voicemail messages like Asterisk does?

Yes check the mod_voicemail page on the wiki. /b

Thanks in advance for any help you can give!

Dan