Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
Hi, Freeswitch can recive calls, but the call is end, openvox tdma400p, can't detect disconnection or hangup. Any idea? RrodolfoS
please show the conf files. Best regards, James.zhu Doing asterisk/PRI/ss7/dahdi, linux, asterisk/sangoma cards, recording device, VOIP gateway. website: www.hiastar.com
Date: Fri, 4 May 2012 10:33:52 -0430 From: rrodolfos@gmail.com To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
Hi,
Freeswitch can recive calls, but the call is end, openvox tdma400p, can't detect disconnection or hangup.
Any idea?
RrodolfoS
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
James, In freeswitch console (Cli) show this: 2012-05-05 10:10:33.464451 [ERR] ftmod_zt.c:1137 [s1c1][1:1] Got polarity reverse (ZT_EVENT_POLARITY) 2012-05-05 10:10:33.464451 [WARNING] ftdm_io.c:1786 [s1c1][1:1] Cannot open channel when is alarmed 2012-05-05 10:10:33.464451 [ERR] ftmod_analog.c:444 [s1c1][1:1] OPEN ERROR [Channel is alarmed ] 2012-05-05 10:10:33.464451 [WARNING] ftdm_io.c:2765 [s1c1][1:1] Channel not opened, proceeding anyway 2012-05-05 10:10:34.404449 [NOTICE] mod_freetdm.c:1887 Alarm cleared on channel 1:1 . . . 2012-05-05 10:13:06.704451 [ERR] ftmod_zt.c:1137 [s1c1][1:1] Got polarity reverse (ZT_EVENT_POLARITY) 2012-05-05 10:13:06.724453 [WARNING] ftmod_analog.c:621 [s1c1][1:1] Not hanging up on polarity reverse, too close to Answer reverse Details: FreeSWITCH Version 1.1.beta1 (git-4283408 2012-04-29 11-33-24 -0400) dahdi-linux-complete-2.6.1+2.6.1 downloaded from asterisk /etc/dahdi/system.conf fxsks=1 echocanceller=mg2,1 loadzone = ve defaultzone = ve /usr/local/freeswitch/conf/freetdm.conf [general] cpu_monitor => no cpu_monitoring_interval => 1000 cpu_set_alarm_threshold => 80 cpu_reset_alarm_threshold => 70 cpu_alarm_action => warn [span zt FXO1] fxo-channel => 1 /usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml <configuration name="freetdm.conf" description="FreeTDM Configuration"> <settings> <param name="debug" value="0"/> </settings> <analog_spans> <span name="FXO1"> <param name="tonegroup" value="ve"/> <param name="enable-callerid" value="true"/> <param name="answer-polarity-reverse" value="true"/> <param name="hangup-polarity-reverse" value="true"/> <param name="polarity-delay" value="600"/> <param name="polarity-callerid" value="true"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </span> </analog_spans> </configuration> RrodolfoS On Fri, May 4, 2012 at 8:26 PM, James zhu <zhulizhong@live.com> wrote:
please show the conf files. Best regards, James.zhu Doing asterisk/PRI/ss7/dahdi, linux, asterisk/sangoma cards, recording device, VOIP gateway. website: www.hiastar.com
Date: Fri, 4 May 2012 10:33:52 -0430 From: rrodolfos@gmail.com To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
Hi,
Freeswitch can recive calls, but the call is end, openvox tdma400p, can't detect disconnection or hangup.
Any idea?
RrodolfoS
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
please check the the channels with alarm. what is the result of dahdi_tool? Best regards, James.zhu Doing asterisk/PRI/ss7/dahdi, linux, asterisk/sangoma cards, recording device, VOIP gateway. website: www.hiastar.com
Date: Sat, 5 May 2012 11:16:31 -0430 From: rrodolfos@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
James,
In freeswitch console (Cli) show this:
2012-05-05 10:10:33.464451 [ERR] ftmod_zt.c:1137 [s1c1][1:1] Got polarity reverse (ZT_EVENT_POLARITY) 2012-05-05 10:10:33.464451 [WARNING] ftdm_io.c:1786 [s1c1][1:1] Cannot open channel when is alarmed 2012-05-05 10:10:33.464451 [ERR] ftmod_analog.c:444 [s1c1][1:1] OPEN ERROR [Channel is alarmed ] 2012-05-05 10:10:33.464451 [WARNING] ftdm_io.c:2765 [s1c1][1:1] Channel not opened, proceeding anyway 2012-05-05 10:10:34.404449 [NOTICE] mod_freetdm.c:1887 Alarm cleared on channel 1:1 . . . 2012-05-05 10:13:06.704451 [ERR] ftmod_zt.c:1137 [s1c1][1:1] Got polarity reverse (ZT_EVENT_POLARITY) 2012-05-05 10:13:06.724453 [WARNING] ftmod_analog.c:621 [s1c1][1:1] Not hanging up on polarity reverse, too close to Answer reverse Details: FreeSWITCH Version 1.1.beta1 (git-4283408 2012-04-29 11-33-24 -0400) dahdi-linux-complete-2.6.1+2.6.1 downloaded from asterisk
/etc/dahdi/system.conf fxsks=1 echocanceller=mg2,1 loadzone = ve defaultzone = ve
/usr/local/freeswitch/conf/freetdm.conf [general] cpu_monitor => no cpu_monitoring_interval => 1000 cpu_set_alarm_threshold => 80 cpu_reset_alarm_threshold => 70 cpu_alarm_action => warn [span zt FXO1] fxo-channel => 1
/usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml <configuration name="freetdm.conf" description="FreeTDM Configuration">
<settings> <param name="debug" value="0"/> </settings> <analog_spans> <span name="FXO1"> <param name="tonegroup" value="ve"/> <param name="enable-callerid" value="true"/> <param name="answer-polarity-reverse" value="true"/> <param name="hangup-polarity-reverse" value="true"/> <param name="polarity-delay" value="600"/> <param name="polarity-callerid" value="true"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </span> </analog_spans>
</configuration>
RrodolfoS
On Fri, May 4, 2012 at 8:26 PM, James zhu <zhulizhong@live.com> wrote:
please show the conf files. Best regards, James.zhu Doing asterisk/PRI/ss7/dahdi, linux, asterisk/sangoma cards, recording device, VOIP gateway. website: www.hiastar.com
Date: Fri, 4 May 2012 10:33:52 -0430 From: rrodolfos@gmail.com To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
Hi,
Freeswitch can recive calls, but the call is end, openvox tdma400p, can't detect disconnection or hangup.
Any idea?
RrodolfoS
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
James, lsdahdi ### Span 1: WCTDM/4 "Wildcard TDM400P REV E/F Board 5" (MASTER) 1 FXO FXSKS (EC: MG2 - INACTIVE) 2 unknown Reserved 3 unknown Reserved 4 unknown Reserved dahdi_scan [1] active=yes alarms=OK description=Wildcard TDM400P REV E/F Board 5 name=WCTDM/4 manufacturer=Digium devicetype=Wildcard TDM400P REV E/F location=PCI Bus 02 Slot 03 basechan=1 totchans=4 irq=0 type=analog port=1,FXO port=2,none port=3,none port=4,none dahdi_speed Count: 988371 dahdi_test Opened pseudo dahdi interface, measuring accuracy... 99.995% 99.989% 99.994% 99.994% 99.994% 99.994% 99.994% 99.994% 99.995% 99.988% 99.994% 99.995% 99.994% 99.994% 99.994% 99.994% 99.994% 99.992% 99.994% 99.994% 99.995% 99.994% 99.994% 99.994% ftdm alarms 1 1 +OK No alarms ftdm iostats 1 1 -- IO statistics for channel 1:1 -- Rx errors: 0 Rx queue size: 0 Rx queue len: 0 Rx count: 0 Tx errors: 0 Tx queue size: 0 Tx queue len: 0 Tx count: 0 Tx idle: 0 +OK ftdm ioread 1 1 2012-05-06 21:16:55.380451 [INFO] ftmod_zt.c:656 Setting echo cancel to 64 taps for 1:1 ftdm dump 1 1 span_id: 1 chan_id: 1 physical_span_id: 1 physical_chan_id: 1 physical_status: ok physical_status_red: 0 physical_status_yellow: 0 physical_status_rai: 0 physical_status_blue: 0 physical_status_ais: 0 physical_status_general: 0 signaling_status: UP type: FXO state: DOWN last_state: UP txgain: 0.00 rxgain: 0.00 cid_date: cid_name: cid_num: ani: aniII: dnis: rdnis: cause: NONE session: (none) -- States -- -- Function -- -- Location -- -- Time Offset -- DOWN => GET_CALLERID [process_event] [ftmod_analog.c:1026] 0ms GET_CALLERID => RING [ftdm_analog_channel_run] [ftmod_analog.c:497] 4999ms RING => PROGRESS [channel_receive_message_fxo] [mod_freetdm.c:1029] 72ms PROGRESS => PROGRESS_MEDIA [channel_receive_message_fxo] [mod_freetdm.c:1029] 10ms PROGRESS_MEDIA => UP [channel_receive_message_fxo] [mod_freetdm.c:1029] 0ms UP => DOWN [process_event] [ftmod_analog.c:1051] 64980ms Time since last state change: 277022ms ftdm list +OK span: 1 (FXO1) type: analog physical_status: ok signaling_status: UP chan_count: 1 dialplan: XML context: public dial_regex: fail_dial_regex: hold_music: analog_options: none RrodolfoS P.D: Venezuelan PSTN On Sun, May 6, 2012 at 8:00 PM, James zhu <zhulizhong@live.com> wrote:
please check the the channels with alarm. what is the result of dahdi_tool?
Best regards, James.zhu Doing asterisk/PRI/ss7/dahdi, linux, asterisk/sangoma cards, recording device, VOIP gateway. website: www.hiastar.com
Date: Sat, 5 May 2012 11:16:31 -0430 From: rrodolfos@gmail.com To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
James,
In freeswitch console (Cli) show this:
2012-05-05 10:10:33.464451 [ERR] ftmod_zt.c:1137 [s1c1][1:1] Got polarity reverse (ZT_EVENT_POLARITY) 2012-05-05 10:10:33.464451 [WARNING] ftdm_io.c:1786 [s1c1][1:1] Cannot open channel when is alarmed 2012-05-05 10:10:33.464451 [ERR] ftmod_analog.c:444 [s1c1][1:1] OPEN ERROR [Channel is alarmed ] 2012-05-05 10:10:33.464451 [WARNING] ftdm_io.c:2765 [s1c1][1:1] Channel not opened, proceeding anyway 2012-05-05 10:10:34.404449 [NOTICE] mod_freetdm.c:1887 Alarm cleared on channel 1:1 . . . 2012-05-05 10:13:06.704451 [ERR] ftmod_zt.c:1137 [s1c1][1:1] Got polarity reverse (ZT_EVENT_POLARITY) 2012-05-05 10:13:06.724453 [WARNING] ftmod_analog.c:621 [s1c1][1:1] Not hanging up on polarity reverse, too close to Answer reverse Details: FreeSWITCH Version 1.1.beta1 (git-4283408 2012-04-29 11-33-24 -0400) dahdi-linux-complete-2.6.1+2.6.1 downloaded from asterisk
/etc/dahdi/system.conf fxsks=1 echocanceller=mg2,1 loadzone = ve defaultzone = ve
/usr/local/freeswitch/conf/freetdm.conf [general] cpu_monitor => no cpu_monitoring_interval => 1000 cpu_set_alarm_threshold => 80 cpu_reset_alarm_threshold => 70 cpu_alarm_action => warn [span zt FXO1] fxo-channel => 1
/usr/local/freeswitch/conf/autoload_configs/freetdm.conf.xml <configuration name="freetdm.conf" description="FreeTDM Configuration">
<settings> <param name="debug" value="0"/> </settings> <analog_spans> <span name="FXO1"> <param name="tonegroup" value="ve"/> <param name="enable-callerid" value="true"/> <param name="answer-polarity-reverse" value="true"/> <param name="hangup-polarity-reverse" value="true"/> <param name="polarity-delay" value="600"/> <param name="polarity-callerid" value="true"/> <param name="dialplan" value="XML"/> <param name="context" value="public"/> </span> </analog_spans>
</configuration>
RrodolfoS
On Fri, May 4, 2012 at 8:26 PM, James zhu <zhulizhong@live.com> wrote:
please show the conf files. Best regards, James.zhu Doing asterisk/PRI/ss7/dahdi, linux, asterisk/sangoma cards, recording device, VOIP gateway. website: www.hiastar.com
Date: Fri, 4 May 2012 10:33:52 -0430 From: rrodolfos@gmail.com To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Openvox tdma400p fail to Disconnect/Hangup detect (Dahdi/Freetdm)
Hi,
Freeswitch can recive calls, but the call is end, openvox tdma400p, can't detect disconnection or hangup.
Any idea?
RrodolfoS
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
James zhu
-
RrodolfoS .