event_socket and stop_dtmf
When I send a stop_dtmf command via event-socket, I get a channel_execute and a channel_execute_complete message back. However FS still accepts DTMFs and sends them via event-socket. In addition the other party will hear the DTMF. So I expect the stop_dtmf command is not really executed by FS. Here is the message I send: SendMsg call-command: execute execute-app-name: stop_dtmf execute-app-arg: true event-lock:true I send this command while I deliver a number of announcements to the user At Startup I get the following on the console 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf' 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf_generate' When I push stop_dtmf I get the following 2008-12-29 22:50:10 [DEBUG] switch_ivr.c:391 switch_ivr_parse_event() sofia/internal/1005@my.domain Command Execute stop_dtmf(true) What am I doing wrong here? Here's a console output when I push DTMF on either side after stop_dtmf has been pushed and the 2 call legs are bridged. 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=417476340 dur=160/160/2000 seq=63290 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=320/320/2000 seq=63291 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=480/480/2000 seq=63292 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=640/640/2000 seq=63293 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=800/800/2000 seq=63294 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=960/960/2000 seq=63295 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1120/1120/2000 seq=63296 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1280/1280/2000 seq=63297 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1440/1440/2000 seq=63298 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1600/1600/2000 seq=63299 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1760/1760/2000 seq=63300 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1920/1920/2000 seq=63301 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63302 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63303 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63304 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=292343252 dur=160/160/2000 seq=53073 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=320/320/2000 seq=53074 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=480/480/2000 seq=53075 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=640/640/2000 seq=53076 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=800/800/2000 seq=53077 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=960/960/2000 seq=53078 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1120/1120/2000 seq=53079 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1280/1280/2000 seq=53080 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1440/1440/2000 seq=53081 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1600/1600/2000 seq=53082 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1760/1760/2000 seq=53083 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1920/1920/2000 seq=53084 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53085 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53086 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53087 I am also wondering why I receive multiple events (15) for each dtmf pressed. I expect an echo floating back and forth and triggering dtmf, hein? Best regards Peter
stop_dtmf is JUST for the inband dtmf listener, I would guess you are getting dtmf via rfc2833 or some other method. If you want to understand why we generate all those packets have a read of rfc 2833. Mike On Dec 29, 2008, at 5:46 PM, Peter P GMX wrote:
When I send a stop_dtmf command via event-socket, I get a channel_execute and a channel_execute_complete message back. However FS still accepts DTMFs and sends them via event-socket. In addition the other party will hear the DTMF. So I expect the stop_dtmf command is not really executed by FS.
Here is the message I send: SendMsg call-command: execute execute-app-name: stop_dtmf execute-app-arg: true event-lock:true I send this command while I deliver a number of announcements to the user
At Startup I get the following on the console 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf' 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf_generate'
When I push stop_dtmf I get the following 2008-12-29 22:50:10 [DEBUG] switch_ivr.c:391 switch_ivr_parse_event() sofia/internal/1005@my.domain Command Execute stop_dtmf(true)
What am I doing wrong here?
Here's a console output when I push DTMF on either side after stop_dtmf has been pushed and the 2 call legs are bridged. 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=417476340 dur=160/160/2000 seq=63290 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=320/320/2000 seq=63291 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=480/480/2000 seq=63292 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=640/640/2000 seq=63293 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=800/800/2000 seq=63294 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=960/960/2000 seq=63295 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1120/1120/2000 seq=63296 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1280/1280/2000 seq=63297 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1440/1440/2000 seq=63298 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1600/1600/2000 seq=63299 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1760/1760/2000 seq=63300 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1920/1920/2000 seq=63301 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63302 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63303 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63304 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=292343252 dur=160/160/2000 seq=53073 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=320/320/2000 seq=53074 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=480/480/2000 seq=53075 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=640/640/2000 seq=53076 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=800/800/2000 seq=53077 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=960/960/2000 seq=53078 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1120/1120/2000 seq=53079 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1280/1280/2000 seq=53080 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1440/1440/2000 seq=53081 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1600/1600/2000 seq=53082 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1760/1760/2000 seq=53083 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1920/1920/2000 seq=53084 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53085 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53086 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53087
I am also wondering why I receive multiple events (15) for each dtmf pressed. I expect an echo floating back and forth and triggering dtmf, hein?
Best regards Peter
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, we get DTMF via rfc2833. If I set "dtmf-type" to "info" then stop_dtmf works? The reason why I want to suppress it, is the dtmf echoing (see end of my mail). Do you see another way how I may suppress this dtmf echo? This is severe sometimes and keeps ongoing for minutes under certain circumstances. Thus further voice communication is no longer possible. We have an incoming leg, play some announcements, build an outgoing leg and then bridge those 2 channels. When any of the participiants then pushes a dtmf, echoing begins. Best regards Peter Michael Jerris schrieb:
stop_dtmf is JUST for the inband dtmf listener, I would guess you are getting dtmf via rfc2833 or some other method. If you want to understand why we generate all those packets have a read of rfc 2833.
Mike
On Dec 29, 2008, at 5:46 PM, Peter P GMX wrote:
When I send a stop_dtmf command via event-socket, I get a channel_execute and a channel_execute_complete message back. However FS still accepts DTMFs and sends them via event-socket. In addition the other party will hear the DTMF. So I expect the stop_dtmf command is not really executed by FS.
Here is the message I send: SendMsg call-command: execute execute-app-name: stop_dtmf execute-app-arg: true event-lock:true I send this command while I deliver a number of announcements to the user
At Startup I get the following on the console 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf' 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf_generate'
When I push stop_dtmf I get the following 2008-12-29 22:50:10 [DEBUG] switch_ivr.c:391 switch_ivr_parse_event() sofia/internal/1005@my.domain Command Execute stop_dtmf(true)
What am I doing wrong here?
Here's a console output when I push DTMF on either side after stop_dtmf has been pushed and the 2 call legs are bridged. 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=417476340 dur=160/160/2000 seq=63290 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=320/320/2000 seq=63291 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=480/480/2000 seq=63292 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=640/640/2000 seq=63293 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=800/800/2000 seq=63294 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=960/960/2000 seq=63295 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1120/1120/2000 seq=63296 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1280/1280/2000 seq=63297 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1440/1440/2000 seq=63298 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1600/1600/2000 seq=63299 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1760/1760/2000 seq=63300 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1920/1920/2000 seq=63301 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63302 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63303 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63304 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=292343252 dur=160/160/2000 seq=53073 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=320/320/2000 seq=53074 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=480/480/2000 seq=53075 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=640/640/2000 seq=53076 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=800/800/2000 seq=53077 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=960/960/2000 seq=53078 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1120/1120/2000 seq=53079 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1280/1280/2000 seq=53080 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1440/1440/2000 seq=53081 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1600/1600/2000 seq=53082 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1760/1760/2000 seq=53083 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1920/1920/2000 seq=53084 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53085 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53086 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53087
I am also wondering why I receive multiple events (15) for each dtmf pressed. I expect an echo floating back and forth and triggering dtmf, hein?
Best regards Peter
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Dec 29, 2008, at 7:41 PM, Peter P GMX <Prometheus001@gmx.net> wrote:
Yes, we get DTMF via rfc2833. If I set "dtmf-type" to "info" then stop_dtmf works?
No, it is ONLY for inband
The reason why I want to suppress it, is the dtmf echoing (see end of my mail)
This just shows sending dtmf, not any echo.
Do you see another way how I may suppress this dtmf echo? This is severe sometimes and keeps ongoing for minutes under certain circumstances. Thus further voice communication is no longer possible.
Your not getting this from dtmf in 2833. If you have this issue you will probably need to fix it at the point where the dtmf is converted to imband.
We have an incoming leg, play some announcements, build an outgoing leg and then bridge those 2 channels. When any of the participiants then pushes a dtmf, echoing begins.
Best regards Peter
This sounds like a Very broken provider and you should be asking them to correct this echo issue. Mike
Michael Jerris schrieb:
stop_dtmf is JUST for the inband dtmf listener, I would guess you are getting dtmf via rfc2833 or some other method. If you want to understand why we generate all those packets have a read of rfc 2833.
Mike
On Dec 29, 2008, at 5:46 PM, Peter P GMX wrote:
When I send a stop_dtmf command via event-socket, I get a channel_execute and a channel_execute_complete message back. However FS still accepts DTMFs and sends them via event-socket. In addition the other party will hear the DTMF. So I expect the stop_dtmf command is not really executed by FS.
Here is the message I send: SendMsg call-command: execute execute-app-name: stop_dtmf execute-app-arg: true event-lock:true I send this command while I deliver a number of announcements to the user
At Startup I get the following on the console 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf' 2008-12-29 22:48:05 [NOTICE] switch_loadable_module.c:238 switch_loadable_module_process() Adding Application 'stop_dtmf_generate'
When I push stop_dtmf I get the following 2008-12-29 22:50:10 [DEBUG] switch_ivr.c:391 switch_ivr_parse_event() sofia/internal/1005@my.domain Command Execute stop_dtmf(true)
What am I doing wrong here?
Here's a console output when I push DTMF on either side after stop_dtmf has been pushed and the 2 call legs are bridged. 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=417476340 dur=160/160/2000 seq=63290 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=320/320/2000 seq=63291 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=480/480/2000 seq=63292 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=640/640/2000 seq=63293 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=800/800/2000 seq=63294 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=960/960/2000 seq=63295 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1120/1120/2000 seq=63296 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1280/1280/2000 seq=63297 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1440/1440/2000 seq=63298 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1600/1600/2000 seq=63299 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1760/1760/2000 seq=63300 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=417476340 dur=1920/1920/2000 seq=63301 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63302 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63303 2008-12-29 23:13:39 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=417476340 dur=2080/2080/2000 seq=63304 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1226 do_2833() Send start packet for [1] ts=292343252 dur=160/160/2000 seq=53073 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=320/320/2000 seq=53074 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=480/480/2000 seq=53075 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=640/640/2000 seq=53076 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=800/800/2000 seq=53077 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=960/960/2000 seq=53078 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1120/1120/2000 seq=53079 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1280/1280/2000 seq=53080 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1440/1440/2000 seq=53081 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1600/1600/2000 seq=53082 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1760/1760/2000 seq=53083 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send middle packet for [1] ts=292343252 dur=1920/1920/2000 seq=53084 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53085 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53086 2008-12-29 23:13:44 [DEBUG] switch_rtp.c:1168 do_2833() Send end packet for [1] ts=292343252 dur=2080/2080/2000 seq=53087
I am also wondering why I receive multiple events (15) for each dtmf pressed. I expect an echo floating back and forth and triggering dtmf, hein?
Best regards Peter
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
Michael Jerris
-
Peter P GMX