mod_gsmopen wont compile on rpi3
sorry if this seems like a stupid question but im a newbie to linux, i compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so i enabled that in modules and recompiled but it never got compiled so then i tried compiling it standalone using the below commands but make clean and make install keep failing with message no rule to make target clean/install apt-get install gsm-utils apt-get install libgsmme-dev apt-get install usb-modeswitch-data usb-modeswitch cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build make DEBUG=0 GPIB=0 make DEBUG=0 GPIB=0 install ldconfig cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ make clean make install -- Regards, Bipin ------------------------------------------------------------------------
Sounds like you need to open a jira and atach as a txt file the full build log so e the gsmopen dev can review Sent from my iPhone
On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com> wrote:
sorry if this seems like a stupid question but im a newbie to linux, i compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so i enabled that in modules and recompiled but it never got compiled so then i tried compiling it standalone using the below commands but make clean and make install keep failing with message no rule to make target clean/install
apt-get install gsm-utils apt-get install libgsmme-dev apt-get install usb-modeswitch-data usb-modeswitch cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build make DEBUG=0 GPIB=0 make DEBUG=0 GPIB=0 install ldconfig cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ make clean make install
-- Regards, Bipin
------------------------------------------------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That is the old way to compile a module. After all the steps you correctly took for libs, module enabling etc, try this: cd /usr/local/src/freeswitch make install it will probably works -giovanni On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org> wrote:
Sounds like you need to open a jira and atach as a txt file the full build log so e the gsmopen dev can review
Sent from my iPhone
On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com> wrote:
sorry if this seems like a stupid question but im a newbie to linux, i compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so i enabled that in modules and recompiled but it never got compiled so then i tried compiling it standalone using the below commands but make clean and make install keep failing with message no rule to make target clean/install
apt-get install gsm-utils apt-get install libgsmme-dev apt-get install usb-modeswitch-data usb-modeswitch cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build make DEBUG=0 GPIB=0 make DEBUG=0 GPIB=0 install ldconfig cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ make clean make install
-- Regards, Bipin
------------------------------------------------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
Thanks for the reply. Well after enabling in modules I had run the rpi3 fs install script which didn't compile it so I ran those old commands but that didn't help so let me try this method. I enable in modules file and directly run that command or do I need to run any other commands like clean, configure or any thing else? On June 4, 2016 8:53:58 PM Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
That is the old way to compile a module.
After all the steps you correctly took for libs, module enabling etc, try this:
cd /usr/local/src/freeswitch make install
it will probably works
-giovanni
On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org> wrote:
Sounds like you need to open a jira and atach as a txt file the full build log so e the gsmopen dev can review
Sent from my iPhone
On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com> wrote:
sorry if this seems like a stupid question but im a newbie to linux, i compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so i enabled that in modules and recompiled but it never got compiled so then i tried compiling it standalone using the below commands but make clean and make install keep failing with message no rule to make target clean/install
apt-get install gsm-utils apt-get install libgsmme-dev apt-get install usb-modeswitch-data usb-modeswitch cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build make DEBUG=0 GPIB=0 make DEBUG=0 GPIB=0 install ldconfig cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ make clean make install
-- Regards, Bipin
------------------------------------------------------------------------
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
---------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
After making libs, and modules.conf, just make install sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 04/Giu/2016 21:53, "Bipin Patel" <bipin@xbipin.com> ha scritto:
Thanks for the reply. Well after enabling in modules I had run the rpi3 fs install script which didn't compile it so I ran those old commands but that didn't help so let me try this method. I enable in modules file and directly run that command or do I need to run any other commands like clean, configure or any thing else?
On June 4, 2016 8:53:58 PM Giovanni Maruzzelli <gmaruzz@gmail.com> wrote:
That is the old way to compile a module.
After all the steps you correctly took for libs, module enabling etc, try this:
cd /usr/local/src/freeswitch make install
it will probably works
-giovanni
On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org> wrote:
Sounds like you need to open a jira and atach as a txt file the full build log so e the gsmopen dev can review
Sent from my iPhone
On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com> wrote:
sorry if this seems like a stupid question but im a newbie to linux, i compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so i enabled that in modules and recompiled but it never got compiled so then i tried compiling it standalone using the below commands but make clean and make install keep failing with message no rule to make target clean/install
apt-get install gsm-utils apt-get install libgsmme-dev apt-get install usb-modeswitch-data usb-modeswitch cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build make DEBUG=0 GPIB=0 make DEBUG=0 GPIB=0 install ldconfig cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ make clean make install
-- Regards, Bipin
------------------------------------------------------------------------
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
i still get this pi@raspberrypi:/usr/local/src/freeswitch $ make install make: *** No rule to make target 'install'. Stop. pi@raspberrypi:/usr/local/src/freeswitch $ sudo make install make: *** No rule to make target 'install'. Stop. Regards, Bipin ------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: 6/5/2016, 12:25:27 AM
After making libs, and modules.conf, just make install
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT
Il 04/Giu/2016 21:53, "Bipin Patel" <bipin@xbipin.com <mailto:bipin@xbipin.com>> ha scritto:
Thanks for the reply. Well after enabling in modules I had run the rpi3 fs install script which didn't compile it so I ran those old commands but that didn't help so let me try this method. I enable in modules file and directly run that command or do I need to run any other commands like clean, configure or any thing else?
On June 4, 2016 8:53:58 PM Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
That is the old way to compile a module.
After all the steps you correctly took for libs, module enabling etc, try this:
cd /usr/local/src/freeswitch make install
it will probably works
-giovanni
On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org <mailto:krice@freeswitch.org>> wrote:
Sounds like you need to open a jira and atach as a txt file the full build log so e the gsmopen dev can review
Sent from my iPhone
> On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote: > > sorry if this seems like a stupid question but im a newbie to linux, i > compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so > i enabled that in modules and recompiled but it never got compiled so > then i tried compiling it standalone using the below commands but make > clean and make install keep failing with message no rule to make target > clean/install > > apt-get install gsm-utils > apt-get install libgsmme-dev > apt-get install usb-modeswitch-data usb-modeswitch > cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build > make DEBUG=0 GPIB=0 > make DEBUG=0 GPIB=0 install > ldconfig > cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ > make clean > make install > > > > -- > Regards, > Bipin > > > ------------------------------------------------------------------------ > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting%40freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users%40lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I do not know how it works on raspberry, in a normal (x86) build you can do make install If you are using a special script to install on raspberry, please contact the script developer. -giovanni On Sun, Jun 5, 2016 at 8:07 AM, Bipin Patel <bipin@xbipin.com> wrote:
i still get this
pi@raspberrypi:/usr/local/src/freeswitch $ make install make: *** No rule to make target 'install'. Stop. pi@raspberrypi:/usr/local/src/freeswitch $ sudo make install make: *** No rule to make target 'install'. Stop.
Regards, Bipin
------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: 6/5/2016, 12:25:27 AM
After making libs, and modules.conf, just make install
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT
Il 04/Giu/2016 21:53, "Bipin Patel" <bipin@xbipin.com <mailto:bipin@xbipin.com>> ha scritto:
Thanks for the reply. Well after enabling in modules I had run the rpi3 fs install script which didn't compile it so I ran those old commands but that didn't help so let me try this method. I enable in modules file and directly run that command or do I need to run any other commands like clean, configure or any thing else?
On June 4, 2016 8:53:58 PM Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> wrote:
That is the old way to compile a module.
After all the steps you correctly took for libs, module enabling etc, try this:
cd /usr/local/src/freeswitch make install
it will probably works
-giovanni
On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org <mailto:krice@freeswitch.org>> wrote:
Sounds like you need to open a jira and atach as a txt file the full build log so e the gsmopen dev can review
Sent from my iPhone
> On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote: > > sorry if this seems like a stupid question but im a newbie to linux, i > compiled FS 1.6 on rpi3, later i wanted to add the mod_gsmopen module so > i enabled that in modules and recompiled but it never got compiled so > then i tried compiling it standalone using the below commands but make > clean and make install keep failing with message no rule to make target > clean/install > > apt-get install gsm-utils > apt-get install libgsmme-dev > apt-get install usb-modeswitch-data usb-modeswitch > cd
/usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build
> make DEBUG=0 GPIB=0 > make DEBUG=0 GPIB=0 install > ldconfig > cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ > make clean > make install > > > > -- > Regards, > Bipin > > >
> > >
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618 <tel:%2B39-347-2665618>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting%40freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users%40lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
its the script which FS staff had created but anyways i figured it all out and it got compiled and working now, thanks Regards, Bipin ------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: 6/5/2016, 4:02:00 PM
I do not know how it works on raspberry, in a normal (x86) build you can do make install
If you are using a special script to install on raspberry, please contact the script developer.
-giovanni
On Sun, Jun 5, 2016 at 8:07 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
i still get this
pi@raspberrypi:/usr/local/src/freeswitch $ make install make: *** No rule to make target 'install'. Stop. pi@raspberrypi:/usr/local/src/freeswitch $ sudo make install make: *** No rule to make target 'install'. Stop.
Regards, Bipin
------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Date: 6/5/2016, 12:25:27 AM > > After making libs, and modules.conf, just make install > > sent from mobile > cell: +39 347 266 56 18 <tel:%2B39%20347%20266%2056%2018> > Giovanni Maruzzelli > OpenTelecom.IT > > Il 04/Giu/2016 21:53, "Bipin Patel" <bipin@xbipin.com <mailto:bipin@xbipin.com> > <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>> ha scritto: > > Thanks for the reply. Well after enabling in modules I had run the > rpi3 fs install script which didn't compile it so I ran those old > commands but that didn't help so let me try this method. I enable > in modules file and directly run that command or do I need to run > any other commands like clean, configure or any thing else? > > On June 4, 2016 8:53:58 PM Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com> > <mailto:gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>>> wrote: > >> That is the old way to compile a module. >> >> After all the steps you correctly took for libs, module enabling >> etc, try this: >> >> cd /usr/local/src/freeswitch >> make install >> >> it will probably works >> >> -giovanni >> >> On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org <mailto:krice@freeswitch.org> >> <mailto:krice@freeswitch.org <mailto:krice@freeswitch.org>>> wrote: >> >> Sounds like you need to open a jira and atach as a txt file >> the full build log so e the gsmopen dev can review >> >> Sent from my iPhone >> >> > On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com> >> <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>> wrote: >> > >> > sorry if this seems like a stupid question but im a newbie >> to linux, i >> > compiled FS 1.6 on rpi3, later i wanted to add the >> mod_gsmopen module so >> > i enabled that in modules and recompiled but it never got >> compiled so >> > then i tried compiling it standalone using the below >> commands but make >> > clean and make install keep failing with message no rule to >> make target >> > clean/install >> > >> > apt-get install gsm-utils >> > apt-get install libgsmme-dev >> > apt-get install usb-modeswitch-data usb-modeswitch >> > cd >> /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build >> > make DEBUG=0 GPIB=0 >> > make DEBUG=0 GPIB=0 install >> > ldconfig >> > cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ >> > make clean >> > make install >> > >> > >> > >> > -- >> > Regards, >> > Bipin >> > >> > >> > >> ------------------------------------------------------------------------ >> > >> > >> > >> _________________________________________________________________________ >> > Professional FreeSWITCH Consulting Services: >> > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> >> >http://www.freeswitchsolutions.com >> > >> > Official FreeSWITCH Sites >> > http://www.freeswitch.org >> > http://confluence.freeswitch.org >> > http://www.cluecon.com >> > >> > FreeSWITCH-users mailing list >> > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >> >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> > >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> > http://www.freeswitch.org >> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> >>http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org >> >> >> >> >> -- >> Sincerely, >> >> Giovanni Maruzzelli >> Cell : +39-347-2665618 <tel:%2B39-347-2665618> <tel:%2B39-347-2665618> >> _________________________________________________________________________ >> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting%40freeswitch.org <mailto:consulting%2540freeswitch.org>> >>http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users%40lists.freeswitch.org <mailto:FreeSWITCH-users%2540lists.freeswitch.org>> >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users >> http://www.freeswitch.org > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> >http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
can you please document it and detail it for other people who can have same problem? Please, describe all steps for installing it. Thanks in advance -giovanni On Sun, Jun 5, 2016 at 2:11 PM, Bipin Patel <bipin@xbipin.com> wrote:
its the script which FS staff had created but anyways i figured it all out and it got compiled and working now, thanks
Regards, Bipin
------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: 6/5/2016, 4:02:00 PM
I do not know how it works on raspberry, in a normal (x86) build you can do make install
If you are using a special script to install on raspberry, please contact the script developer.
-giovanni
On Sun, Jun 5, 2016 at 8:07 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
i still get this
pi@raspberrypi:/usr/local/src/freeswitch $ make install make: *** No rule to make target 'install'. Stop. pi@raspberrypi:/usr/local/src/freeswitch $ sudo make install make: *** No rule to make target 'install'. Stop.
Regards, Bipin
------------------------------------------------------------------------
-------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Date: 6/5/2016, 12:25:27 AM > > After making libs, and modules.conf, just make install > > sent from mobile > cell: +39 347 266 56 18 <tel:%2B39%20347%20266%2056%2018> > Giovanni Maruzzelli > OpenTelecom.IT > > Il 04/Giu/2016 21:53, "Bipin Patel" <bipin@xbipin.com <mailto:bipin@xbipin.com> > <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>> ha scritto: > > Thanks for the reply. Well after enabling in modules I had run the > rpi3 fs install script which didn't compile it so I ran those old > commands but that didn't help so let me try this method. I enable > in modules file and directly run that command or do I need to run > any other commands like clean, configure or any thing else? > > On June 4, 2016 8:53:58 PM Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com> > <mailto:gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>>> wrote: > >> That is the old way to compile a module. >> >> After all the steps you correctly took for libs, module enabling >> etc, try this: >> >> cd /usr/local/src/freeswitch >> make install >> >> it will probably works >> >> -giovanni >> >> On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice <krice@freeswitch.org <mailto:krice@freeswitch.org> >> <mailto:krice@freeswitch.org <mailto:krice@freeswitch.org>>>
wrote:
>> >> Sounds like you need to open a jira and atach as a txt
file
>> the full build log so e the gsmopen dev can review >> >> Sent from my iPhone >> >> > On Jun 4, 2016, at 10:23 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com> >> <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>>
wrote:
>> > >> > sorry if this seems like a stupid question but im a newbie >> to linux, i >> > compiled FS 1.6 on rpi3, later i wanted to add the >> mod_gsmopen module so >> > i enabled that in modules and recompiled but it never
got
>> compiled so >> > then i tried compiling it standalone using the below >> commands but make >> > clean and make install keep failing with message no rule to >> make target >> > clean/install >> > >> > apt-get install gsm-utils >> > apt-get install libgsmme-dev >> > apt-get install usb-modeswitch-data usb-modeswitch >> > cd >>
/usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build
>> > make DEBUG=0 GPIB=0 >> > make DEBUG=0 GPIB=0 install >> > ldconfig >> > cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ >> > make clean >> > make install >> > >> > >> > >> > -- >> > Regards, >> > Bipin >> > >> > >> > >>
------------------------------------------------------------------------
>> > >> > >> > >>
_________________________________________________________________________
>> > Professional FreeSWITCH Consulting Services: >> > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org
>> >http://www.freeswitchsolutions.com >> > >> > Official FreeSWITCH Sites >> > http://www.freeswitch.org >> > http://confluence.freeswitch.org >> > http://www.cluecon.com >> > >> > FreeSWITCH-users mailing list >> > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >> >
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
>> > >> UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
>> > http://www.freeswitch.org >> >>
_________________________________________________________________________
>> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org
>>http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org >> >> >> >> >> -- >> Sincerely, >> >> Giovanni Maruzzelli >> Cell : +39-347-2665618 <tel:%2B39-347-2665618> <tel:%2B39-347-2665618> >>
_________________________________________________________________________
>> Professional FreeSWITCH Consulting Services: >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting%40freeswitch.org <mailto:consulting%2540freeswitch.org>> >>http://www.freeswitchsolutions.com >> >> Official FreeSWITCH Sites >> http://www.freeswitch.org >> http://confluence.freeswitch.org >> http://www.cluecon.com >> >> FreeSWITCH-users mailing list >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> >> <mailto:FreeSWITCH-users%40lists.freeswitch.org <mailto:FreeSWITCH-users%2540lists.freeswitch.org>> >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users >> UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
>> http://www.freeswitch.org > >
_________________________________________________________________________
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org
>http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org > > > >
_________________________________________________________________________
> Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_________________________________________________________________________
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely, Giovanni Maruzzelli Cell : +39-347-2665618
actually i tried a lot of things so dont remember what caused it but i think these steps made it work, most important is to make the libctb first then run ldconfig as root then compile the whole of FS, these steps assume u have built FS with the defaults first which means ./bootstrap.sh -j was already run once. giovanni, can u confirm if all these commands r in the correct order, if so then ill add it to the gsmopen page because being a linux newbie i dont even know what a make and configure commands does after all and still have no clue if its even possible to build FS for the first time with the mod_gsmopen enabled in modules, that's y the steps assuming FS was built with the defaults first :) first go edit the modules.conf file and uncomment the mod_gsmopen sudo apt-get install gsm-utils sudo apt-get install libgsmme-dev sudo apt-get install usb-modeswitch-data usb-modeswitch cd /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build sudo make DEBUG=0 GPIB=0 sudo make DEBUG=0 GPIB=0 install sudo ldconfig cd /usr/local/src/freeswitch/ sudo ./configure -C sudo make -j3 sudo make install Regards, Bipin ------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: 6/5/2016, 4:40:17 PM
can you please document it and detail it for other people who can have same problem?
Please, describe all steps for installing it.
Thanks in advance -giovanni
On Sun, Jun 5, 2016 at 2:11 PM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
its the script which FS staff had created but anyways i figured it all out and it got compiled and working now, thanks
Regards, Bipin
------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 From: Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>> Date: 6/5/2016, 4:02:00 PM > I do not know how it works on raspberry, in a normal (x86) build you > can do make install > > If you are using a special script to install on raspberry, please > contact the script developer. > > -giovanni > > On Sun, Jun 5, 2016 at 8:07 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com> > <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>> wrote: > > i still get this > > pi@raspberrypi:/usr/local/src/freeswitch $ make install > make: *** No rule to make target 'install'. Stop. > pi@raspberrypi:/usr/local/src/freeswitch $ sudo make install > make: *** No rule to make target 'install'. Stop. > > > > Regards, > Bipin > > > ------------------------------------------------------------------------ > -------- Original Message -------- > Subject: Re: [Freeswitch-users] mod_gsmopen wont compile on rpi3 > From: Giovanni Maruzzelli <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com> > <mailto:gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>>> > To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> > <mailto:freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org>>> > Date: 6/5/2016, 12:25:27 AM > > > > After making libs, and modules.conf, just make install > > > > sent from mobile > > cell: +39 347 266 56 18 <tel:%2B39%20347%20266%2056%2018> <tel:%2B39%20347%20266%2056%2018> > > Giovanni Maruzzelli > > OpenTelecom.IT > > > > Il 04/Giu/2016 21:53, "Bipin Patel" <bipin@xbipin.com <mailto:bipin@xbipin.com> > <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>> > > <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com> <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>>> ha scritto: > > > > Thanks for the reply. Well after enabling in modules I had > run the > > rpi3 fs install script which didn't compile it so I ran > those old > > commands but that didn't help so let me try this method. I > enable > > in modules file and directly run that command or do I need > to run > > any other commands like clean, configure or any thing else? > > > > On June 4, 2016 8:53:58 PM Giovanni Maruzzelli > <gmaruzz@gmail.com <mailto:gmaruzz@gmail.com> <mailto:gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>> > > <mailto:gmaruzz@gmail.com <mailto:gmaruzz@gmail.com> <mailto:gmaruzz@gmail.com <mailto:gmaruzz@gmail.com>>>> wrote: > > > >> That is the old way to compile a module. > >> > >> After all the steps you correctly took for libs, module > enabling > >> etc, try this: > >> > >> cd /usr/local/src/freeswitch > >> make install > >> > >> it will probably works > >> > >> -giovanni > >> > >> On Sat, Jun 4, 2016 at 6:06 PM, Ken Rice > <krice@freeswitch.org <mailto:krice@freeswitch.org> <mailto:krice@freeswitch.org <mailto:krice@freeswitch.org>> > >> <mailto:krice@freeswitch.org <mailto:krice@freeswitch.org> <mailto:krice@freeswitch.org <mailto:krice@freeswitch.org>>>> wrote: > >> > >> Sounds like you need to open a jira and atach as a txt file > >> the full build log so e the gsmopen dev can review > >> > >> Sent from my iPhone > >> > >> > On Jun 4, 2016, at 10:23 AM, Bipin Patel > <bipin@xbipin.com <mailto:bipin@xbipin.com> <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>> > >> <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com> <mailto:bipin@xbipin.com <mailto:bipin@xbipin.com>>>> wrote: > >> > > >> > sorry if this seems like a stupid question but im a > newbie > >> to linux, i > >> > compiled FS 1.6 on rpi3, later i wanted to add the > >> mod_gsmopen module so > >> > i enabled that in modules and recompiled but it never got > >> compiled so > >> > then i tried compiling it standalone using the below > >> commands but make > >> > clean and make install keep failing with message no > rule to > >> make target > >> > clean/install > >> > > >> > apt-get install gsm-utils > >> > apt-get install libgsmme-dev > >> > apt-get install usb-modeswitch-data usb-modeswitch > >> > cd > >> > /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/libctb-0.16/build > >> > make DEBUG=0 GPIB=0 > >> > make DEBUG=0 GPIB=0 install > >> > ldconfig > >> > cd > /usr/local/src/freeswitch/src/mod/endpoints/mod_gsmopen/ > >> > make clean > >> > make install > >> > > >> > > >> > > >> > -- > >> > Regards, > >> > Bipin > >> > > >> > > >> > > >> > ------------------------------------------------------------------------ > >> > > >> > > >> > > >> > _________________________________________________________________________ > >> > Professional FreeSWITCH Consulting Services: > >> > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> > <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>>> > >> >http://www.freeswitchsolutions.com > >> > > >> > Official FreeSWITCH Sites > >> > http://www.freeswitch.org > >> > http://confluence.freeswitch.org > >> > http://www.cluecon.com > >> > > >> > FreeSWITCH-users mailing list > >> > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>>> > >> >http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> > > >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> > http://www.freeswitch.org > >> > >> > _________________________________________________________________________ > >> Professional FreeSWITCH Consulting Services: > >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> > <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>>> > >>http://www.freeswitchsolutions.com > >> > >> Official FreeSWITCH Sites > >> http://www.freeswitch.org > >> http://confluence.freeswitch.org > >> http://www.cluecon.com > >> > >> FreeSWITCH-users mailing list > >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > >> <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>>> > >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> http://www.freeswitch.org > >> > >> > >> > >> > >> -- > >> Sincerely, > >> > >> Giovanni Maruzzelli > >> Cell : +39-347-2665618 <tel:%2B39-347-2665618> <tel:%2B39-347-2665618> > <tel:%2B39-347-2665618> > >> _________________________________________________________________________ > >> Professional FreeSWITCH Consulting Services: > >> consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> > <mailto:consulting%40freeswitch.org <mailto:consulting%2540freeswitch.org> > <mailto:consulting%2540freeswitch.org <mailto:consulting%252540freeswitch.org>>> > >>http://www.freeswitchsolutions.com > >> > >> Official FreeSWITCH Sites > >> http://www.freeswitch.org > >> http://confluence.freeswitch.org > >> http://www.cluecon.com > >> > >> FreeSWITCH-users mailing list > >> FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > >> <mailto:FreeSWITCH-users%40lists.freeswitch.org <mailto:FreeSWITCH-users%2540lists.freeswitch.org> > <mailto:FreeSWITCH-users%2540lists.freeswitch.org <mailto:FreeSWITCH-users%252540lists.freeswitch.org>>> > >>http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > >> > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > >> http://www.freeswitch.org > > > > > _________________________________________________________________________ > > Professional FreeSWITCH Consulting Services: > > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> > <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>>> > >http://www.freeswitchsolutions.com > > > > Official FreeSWITCH Sites > > http://www.freeswitch.org > > http://confluence.freeswitch.org > > http://www.cluecon.com > > > > FreeSWITCH-users mailing list > > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>>> > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > > http://www.freeswitch.org > > > > > > > > > _________________________________________________________________________ > > Professional FreeSWITCH Consulting Services: > > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> > > http://www.freeswitchsolutions.com > > > > Official FreeSWITCH Sites > > http://www.freeswitch.org > > http://confluence.freeswitch.org > > http://www.cluecon.com > > > > FreeSWITCH-users mailing list > > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > > http://www.freeswitch.org > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> <mailto:consulting@freeswitch.org <mailto:consulting@freeswitch.org>> > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > > -- > Sincerely, > > Giovanni Maruzzelli > Cell : +39-347-2665618 <tel:%2B39-347-2665618> > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://confluence.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Sincerely,
Giovanni Maruzzelli Cell : +39-347-2665618
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Bipin Patel
-
Giovanni Maruzzelli
-
Ken Rice