Confirmation checking on VAD is needed.
I need confirmation on whether VAD is disabled in the FS default configuration. I've looked at conf\sip_profiles\internal.xml and the relevant section was the following which seems to indicate that VAD is off by default since I don't see VAD value="none". ??? <!-- VAD choose one (out is a good choice); --> ??? <!-- <param name="vad" value="in"/> --> ??? <!-- <param name="vad" value="out"/> --> ??? <!-- <param name="vad" value="both"/> --> ??? <!--<param name="alias" value="sip:10.0.1.251:5555"/>--> ??? <!--all inbound reg will look in this domain for the users --> ??? <!--<param name="force-register-domain" value="cluecon.com"/>--> ??? <!-- disable register and transfer which may be undesirable in a public switch --> ??? <!--<param name="disable-transfer" value="true"/>--> ??? <!--<param name="disable-register" value="true"/>--> However, is there a way to confirm this in the FS console?
On Sat, Dec 13, 2008 at 03:05:55AM -0500, mszlazak@aol.com wrote:
I need confirmation on whether VAD is disabled in the FS default configuration. I've looked at conf\sip_profiles\internal.xml and the relevant section was the following which seems to indicate that VAD is off by default since I don't see VAD value="none".
This is all commented out, and from a quick look at the code in the sofia SIP module, VAD won't be enabled unless you explicitly set it to "in" or "out".
participants (2)
-
Jason White
-
mszlazak＠aol.com