video on conference with PC and MAC browser works but fail with iPhone safari via webrtc
Hi All, here is our simple architecture <client A>---<FreeSWITCH> <client B>----/ - client A and B are both registered on FreeSWITCH via websocket (using sipjs 0.9.2) - we enable video-mode= transcode and load mod_av on FreeSWITCH. - if client A uses chrome on PC and client B use safari on *MAC*, they can see each other, talk to each other in the same conference. - if client A uses chrome on PC and client B use safari on *iPhone*(8plus, iOS 11.4), they can NOT see each other, talk to each other in the same conference. I though safari on MAC works, then safari on iPhone should work, but not. Is it possible to fix that with changing configuration of FreeSWITCH? or any suggestion? Thanks in advance. FreeSWITCH Version 1.6.20 Ubuntu Server Ubuntu 14.04.1 LTS 64bit libav-11.4 or libav-12 See below configurations: 1. enable video-mode= transcode <param name="conference-flags" value="transcode-video|minimize-video-encoding"/> <param name="video-mode" value="transcode"/> 2.enable VP8/H264 codec support <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU,PCMA,VP8,H264"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,VP8,H264"/> 3.enable mod_av and disable mod_h26x <load module="mod_av"/> <!--<load module="mod_h26x"/>-->
Hi, try mux instead of transcode Regards, Alex On Tue, Jun 26, 2018 at 12:47 PM, 薛光宏 <albert.hsueh@cloudigit.com> wrote:
Hi All,
here is our simple architecture <client A>---<FreeSWITCH> <client B>----/
- client A and B are both registered on FreeSWITCH via websocket (using sipjs 0.9.2) - we enable video-mode= transcode and load mod_av on FreeSWITCH. - if client A uses chrome on PC and client B use safari on *MAC*, they can see each other, talk to each other in the same conference. - if client A uses chrome on PC and client B use safari on *iPhone*(8plus, iOS 11.4), they can NOT see each other, talk to each other in the same conference.
I though safari on MAC works, then safari on iPhone should work, but not. Is it possible to fix that with changing configuration of FreeSWITCH? or any suggestion?
Thanks in advance.
FreeSWITCH Version 1.6.20 Ubuntu Server Ubuntu 14.04.1 LTS 64bit libav-11.4 or libav-12
See below configurations: 1. enable video-mode= transcode <param name="conference-flags" value="transcode-video| minimize-video-encoding"/> <param name="video-mode" value="transcode"/>
2.enable VP8/H264 codec support <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU,PCMA,VP8,H264"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMU,PCMA,VP8,H264"/>
3.enable mod_av and disable mod_h26x <load module="mod_av"/> <!--<load module="mod_h26x"/>-->
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Alex Sibyakin | Support Engineer FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: alex@freeswitch.com Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> Need commercial support? Contact sales@freeswitch.com for details.
Hi, Thank you for reply. We tried this before <param name="video-mode" value="mux"/> but it still can not work. Is any parameter also to be modified with video-mode=mux? We also tried this <param name="video-fps" value="25"/> Someone suggested this value on iOS but also failed in our case. Sincerely Albert 2018-06-29 10:19 GMT+08:00 Alexey Sibyakin <alex@freeswitch.com>:
Hi,
try mux instead of transcode
Regards,
Alex
On Tue, Jun 26, 2018 at 12:47 PM, 薛光宏 <albert.hsueh@cloudigit.com> wrote:
Hi All,
here is our simple architecture <client A>---<FreeSWITCH> <client B>----/
- client A and B are both registered on FreeSWITCH via websocket (using sipjs 0.9.2) - we enable video-mode= transcode and load mod_av on FreeSWITCH. - if client A uses chrome on PC and client B use safari on *MAC*, they can see each other, talk to each other in the same conference. - if client A uses chrome on PC and client B use safari on *iPhone*(8plus, iOS 11.4), they can NOT see each other, talk to each other in the same conference.
I though safari on MAC works, then safari on iPhone should work, but not. Is it possible to fix that with changing configuration of FreeSWITCH? or any suggestion?
Thanks in advance.
FreeSWITCH Version 1.6.20 Ubuntu Server Ubuntu 14.04.1 LTS 64bit libav-11.4 or libav-12
See below configurations: 1. enable video-mode= transcode <param name="conference-flags" value="transcode-video|minimiz e-video-encoding"/> <param name="video-mode" value="transcode"/>
2.enable VP8/H264 codec support <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU,PCMA,VP8,H264"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCM U,PCMA,VP8,H264"/>
3.enable mod_av and disable mod_h26x <load module="mod_av"/> <!--<load module="mod_h26x"/>-->
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Alex Sibyakin | Support Engineer FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: alex@freeswitch.com Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> Need commercial support? Contact sales@freeswitch.com for details.
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
Hi All, We had an issue that no video on conference if iPhone connect FreeSWITCH using 4G network with ipv6 support. Finally, this issue is resolved and now we have a new test case with video-mod=mux. case 1 iPhone+wifi(ipv4) no video when a conference is created (fs_cli output <https://pastebin.com/VXYbxvJz>) case 2 iPhone+4g(ipv6) video/audio is ok when a conference is created (fs_cli output <https://pastebin.com/3qk4xJLB>) case 3 PC/MAC+wifi(ipv4) video/audio is ok when a conference is created( fs_cli_output <https://pastebin.com/XNbcH4KA>) iPhone and PC/MAC use the same wifi environment. We have no idea why it's different between iPhone wifi and iPhone 4g. Does anyone have opinion? Thanks in advance. By the way, we see error message below if we wait for a long time in case 1. We are not sure what that means. 2018-07-13 15:02:39.364171 [ERR] switch_rtp.c:834 No video stun for a long time! 2018-07-13 15:02:39.464176 [ERR] switch_rtp.c:834 No audio stun for a long time! 2018-07-02 16:34 GMT+08:00 薛光宏 <albert.hsueh@cloudigit.com>:
Hi,
Thank you for reply.
We tried this before <param name="video-mode" value="mux"/>
but it still can not work. Is any parameter also to be modified with video-mode=mux?
We also tried this <param name="video-fps" value="25"/>
Someone suggested this value on iOS but also failed in our case.
Sincerely Albert
2018-06-29 10:19 GMT+08:00 Alexey Sibyakin <alex@freeswitch.com>:
Hi,
try mux instead of transcode
Regards,
Alex
On Tue, Jun 26, 2018 at 12:47 PM, 薛光宏 <albert.hsueh@cloudigit.com> wrote:
Hi All,
here is our simple architecture <client A>---<FreeSWITCH> <client B>----/
- client A and B are both registered on FreeSWITCH via websocket (using sipjs 0.9.2) - we enable video-mode= transcode and load mod_av on FreeSWITCH. - if client A uses chrome on PC and client B use safari on *MAC*, they can see each other, talk to each other in the same conference. - if client A uses chrome on PC and client B use safari on *iPhone*(8plus, iOS 11.4), they can NOT see each other, talk to each other in the same conference.
I though safari on MAC works, then safari on iPhone should work, but not. Is it possible to fix that with changing configuration of FreeSWITCH? or any suggestion?
Thanks in advance.
FreeSWITCH Version 1.6.20 Ubuntu Server Ubuntu 14.04.1 LTS 64bit libav-11.4 or libav-12
See below configurations: 1. enable video-mode= transcode <param name="conference-flags" value="transcode-video|minimiz e-video-encoding"/> <param name="video-mode" value="transcode"/>
2.enable VP8/H264 codec support <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU,PCMA,VP8,H264"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCM U,PCMA,VP8,H264"/>
3.enable mod_av and disable mod_h26x <load module="mod_av"/> <!--<load module="mod_h26x"/>-->
____________________________________________________________ _____________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
-- Alex Sibyakin | Support Engineer FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: alex@freeswitch.com Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> Need commercial support? Contact sales@freeswitch.com for details.
_________________________________________________________________________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
Hi All, Finally, we got one set of configuration after many testing. This can resolve our issue. We tried many configuration and thought key setting is as follows conference.conf.xml <param name="video-mode" value="mux"/> <param name="conference-flags" value="rfc-4579|livearray-sync|minimize-video-encoding"/> <param name="video-fps" value="25"/> vars.xml <X-PRE-PROCESS cmd="set" data="global_codec_prefs=OPUS,G722,PCMU,PCMA,GSM,H264,VP8"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=OPUS,G722,PCMU,PCMA,GSM,H264,VP8"/> <X-PRE-PROCESS cmd="set" data="media_mix_inbound_outbound_codecs=true"/> external.xml <param name="inbound-codec-negotiation" value="greedy"/> <param name="inbound-late-negotiation" value="false"/> <param name="inbound-zrtp-passthru" value="false"/> For reference. Thanks. Sincerely Albert 2018-07-13 16:32 GMT+08:00 薛光宏 <albert.hsueh@cloudigit.com>:
Hi All,
We had an issue that no video on conference if iPhone connect FreeSWITCH using 4G network with ipv6 support. Finally, this issue is resolved and now we have a new test case with video-mod=mux.
case 1 iPhone+wifi(ipv4) no video when a conference is created (fs_cli output <https://pastebin.com/VXYbxvJz>)
case 2 iPhone+4g(ipv6) video/audio is ok when a conference is created (fs_cli output <https://pastebin.com/3qk4xJLB>)
case 3 PC/MAC+wifi(ipv4) video/audio is ok when a conference is created( fs_cli_output <https://pastebin.com/XNbcH4KA>)
iPhone and PC/MAC use the same wifi environment.
We have no idea why it's different between iPhone wifi and iPhone 4g. Does anyone have opinion? Thanks in advance.
By the way, we see error message below if we wait for a long time in case 1. We are not sure what that means. 2018-07-13 15:02:39.364171 [ERR] switch_rtp.c:834 No video stun for a long time! 2018-07-13 15:02:39.464176 [ERR] switch_rtp.c:834 No audio stun for a long time!
2018-07-02 16:34 GMT+08:00 薛光宏 <albert.hsueh@cloudigit.com>:
Hi,
Thank you for reply.
We tried this before <param name="video-mode" value="mux"/>
but it still can not work. Is any parameter also to be modified with video-mode=mux?
We also tried this <param name="video-fps" value="25"/>
Someone suggested this value on iOS but also failed in our case.
Sincerely Albert
2018-06-29 10:19 GMT+08:00 Alexey Sibyakin <alex@freeswitch.com>:
Hi,
try mux instead of transcode
Regards,
Alex
On Tue, Jun 26, 2018 at 12:47 PM, 薛光宏 <albert.hsueh@cloudigit.com> wrote:
Hi All,
here is our simple architecture <client A>---<FreeSWITCH> <client B>----/
- client A and B are both registered on FreeSWITCH via websocket (using sipjs 0.9.2) - we enable video-mode= transcode and load mod_av on FreeSWITCH. - if client A uses chrome on PC and client B use safari on *MAC*, they can see each other, talk to each other in the same conference. - if client A uses chrome on PC and client B use safari on *iPhone*(8plus, iOS 11.4), they can NOT see each other, talk to each other in the same conference.
I though safari on MAC works, then safari on iPhone should work, but not. Is it possible to fix that with changing configuration of FreeSWITCH? or any suggestion?
Thanks in advance.
FreeSWITCH Version 1.6.20 Ubuntu Server Ubuntu 14.04.1 LTS 64bit libav-11.4 or libav-12
See below configurations: 1. enable video-mode= transcode <param name="conference-flags" value="transcode-video|minimiz e-video-encoding"/> <param name="video-mode" value="transcode"/>
2.enable VP8/H264 codec support <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMU, PCMA,VP8,H264"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCM U,PCMA,VP8,H264"/>
3.enable mod_av and disable mod_h26x <load module="mod_av"/> <!--<load module="mod_h26x"/>-->
____________________________________________________________ _____________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/free switch-users https://freeswitch.com
-- Alex Sibyakin | Support Engineer FreeSWITCH Solutions | 17345 Civic Drive #2531 Brookfield, WI 53045 <https://maps.google.com/?q=17345+Civic+Drive+%232531+Brookfield,+WI+53045&entry=gmail&source=g> Email: alex@freeswitch.com Website: https://www.FreeSWITCH.com <https://www.freeswitch.com/> Need commercial support? Contact sales@freeswitch.com for details.
____________________________________________________________ _____________ Professional FreeSWITCH Services sales@freeswitch.com https://freeswitch.com
Official FreeSWITCH Sites https://freeswitch.com/oss https://freeswitch.org/confluence https://cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users https://freeswitch.com
participants (2)
-
Alexey Sibyakin
-
薛光宏