Recording calls with a beep
Hi All, I have been searching the wiki for a good way to insert a beep every 10 seconds into a call that is being recorded (I plan on recording all calls to Comcast from here on out). This is my dialplan: <extension name="CallCentric.18002662278" > <condition field="destination_number" expression="18002662278" > <action application="set" data="sip_h_X-accountcode=${accountcode}" /> <action application="set" data="sip_h_X-Tag=" /> <action application="set" data="call_direction=outbound" /> <action application="set" data="hangup_after_bridge=true" /> <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}" /> <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}" /> <action application="set" data="inherit_codec=true" /> <action application="set" data="RECORD_TITLE=Recording ${destination_number} ${caller_id_number} ${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_COPYRIGHT=(c) 2012" /> <action application="set" data="RECORD_ARTIST=FreeSwitch" /> <action application="set" data="RECORD_COMMENT=FreeSwitch" /> <action application="set" data="RECORD_DATE=${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_STEREO=true" /> <action application="displace_session" data="tone_stream://%(100,15000,800);loops=-1" /> <action application="record_session" data="$${base_dir}/recordings/archive/${strftime(%Y-%m-%d-%H-%M-%S)}_${destination_number}_${caller_id_number}.wav" /> <action application="bridge" data="sofia/gateway/CallCentric/18002662278" /> </condition> </extension> I would also like to playback a tone so they know I'm recording them (for legal reasons). Per the wiki, the displace_session does indeed play back a tone every 15 seconds. But I'm afraid it never bridges the call.. It's probably something stupid, but what am I doing wrong here? I hear the intial beep after dialing the number but no early media with dead air on the line. What is the best way to insert a tone every x seconds while both legs of the call are in progress and so that each party hears the tone? Also, when testing this without tone_stream, the recording works (horaah) but the recording itself is really ssssssssllllooowwwwww. I am still working on that one, its probably in the wiki, i'm looking now, but if anyone has a suggestion let me know. Best regards, Robert Stevens
I can be wrong but most likely it is possible via event_socket only. So you have to listen events on FS from some script and when the call is bridged, the script must playback the beep to both legs. From: rstevens@robcoit.com Date: Mon, 29 Oct 2012 00:03:51 -0400 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Recording calls with a beep Hi All, I have been searching the wiki for a good way to insert a beep every 10 seconds into a call that is being recorded (I plan on recording all calls to Comcast from here on out). This is my dialplan: <extension name="CallCentric.18002662278" > <condition field="destination_number" expression="18002662278" > <action application="set" data="sip_h_X-accountcode=${accountcode}" /> <action application="set" data="sip_h_X-Tag=" /> <action application="set" data="call_direction=outbound" /> <action application="set" data="hangup_after_bridge=true" /> <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}" /> <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}" /> <action application="set" data="inherit_codec=true" /> <action application="set" data="RECORD_TITLE=Recording ${destination_number} ${caller_id_number} ${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_COPYRIGHT=(c) 2012" /> <action application="set" data="RECORD_ARTIST=FreeSwitch" /> <action application="set" data="RECORD_COMMENT=FreeSwitch" /> <action application="set" data="RECORD_DATE=${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_STEREO=true" /> <action application="displace_session" data="tone_stream://%(100,15000,800);loops=-1" /> <action application="record_session" data="$${base_dir}/recordings/archive/${strftime(%Y-%m-%d-%H-%M-%S)}_${destination_number}_${caller_id_number}.wav" /> <action application="bridge" data="sofia/gateway/CallCentric/18002662278" /> </condition> </extension> I would also like to playback a tone so they know I'm recording them (for legal reasons). Per the wiki, the displace_session does indeed play back a tone every 15 seconds. But I'm afraid it never bridges the call.. It's probably something stupid, but what am I doing wrong here? I hear the intial beep after dialing the number but no early media with dead air on the line. What is the best way to insert a tone every x seconds while both legs of the call are in progress and so that each party hears the tone? Also, when testing this without tone_stream, the recording works (horaah) but the recording itself is really ssssssssllllooowwwwww. I am still working on that one, its probably in the wiki, i'm looking now, but if anyone has a suggestion let me know. Best regards, Robert Stevens _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sounds like this is something that's more ad-hoc, so you might want to do a quick and dirty combo of Lua and sched_api. Roughly it would look something like this: <action application="bridge" data="{api_on_answer='luarun beep.lua ${uuid} 15'}sofia/gateway/my_gw/18005551212"/> Then have beep.lua be something like this: -- beep.lua uuid = argv[1] if ( uuid == nil ) then freeswitch.consoleLog("WARNING","No uuid specified, exiting...\n") return "exit" end interval = argv[2] if ( interval == nil ) then interval = 15 end api = freeswitch.API() dump = api:execute('uuid_dump',uuid); test = string.sub(dump,1,4) if ( test == '-ERR' ) then freeswitch.consoleLog("INFO","UUID " .. uuid .. " not present, ending the beeps\n") else -- grab the other leg's uuid other_leg = api:execute('uuid_getvar',uuid .. ' bridge_to') -- uuid_displace to both legs with muxing on so that parties can still hear each other -- set the v=-xx to an appropriate dB value for the volume you want -- change the '40' to a higher number to make the beep duration longer command = ' start tone_stream://v=-18;%(40,0,1000) mux' api:execute('uuid_displace',uuid .. command) api:execute('uuid_displace',other_leg .. command) -- queue it up to run again in <interval> seconds api:execute('sched_api',' +' .. interval .. ' none luarun beep.lua ' .. uuid .. ' ' .. interval) end Remember, standard disclaimer<http://wiki.freeswitch.org/wiki/Reporting_Bugs#Standard_Disclaimer>applies, so tinker with it before you report back that it does not work. If you get it working then it would be great if you could pay the wiki tax and put it up there as an example of what can be done w/ sched_api and Lua. -MC On Mon, Oct 29, 2012 at 5:12 AM, Yuriy Nasida <nasida@live.ru> wrote:
I can be wrong but most likely it is possible via event_socket only. So you have to listen events on FS from some script and when the call is bridged, the script must playback the beep to both legs.
------------------------------ From: rstevens@robcoit.com Date: Mon, 29 Oct 2012 00:03:51 -0400 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Recording calls with a beep
Hi All,
I have been searching the wiki for a good way to insert a beep every 10 seconds into a call that is being recorded (I plan on recording all calls to Comcast from here on out). This is my dialplan:
<extension name="CallCentric.18002662278" > <condition field="destination_number" expression="18002662278" > <action application="set" data="sip_h_X-accountcode=${accountcode}" /> <action application="set" data="sip_h_X-Tag=" /> <action application="set" data="call_direction=outbound" /> <action application="set" data="hangup_after_bridge=true" /> <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}" /> <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}" /> <action application="set" data="inherit_codec=true" /> <action application="set" data="RECORD_TITLE=Recording ${destination_number} ${caller_id_number} ${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_COPYRIGHT=(c) 2012" /> <action application="set" data="RECORD_ARTIST=FreeSwitch" /> <action application="set" data="RECORD_COMMENT=FreeSwitch" /> <action application="set" data="RECORD_DATE=${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_STEREO=true" /> <action application="displace_session" data="tone_stream://%(100,15000,800);loops=-1" /> <action application="record_session" data="$${base_dir}/recordings/archive/${strftime(%Y-%m-%d-%H-%M-%S)}_${destination_number}_${caller_id_number}.wav" /> <action application="bridge" data="sofia/gateway/CallCentric/ 18002662278" />
</condition> </extension>
I would also like to playback a tone so they know I'm recording them (for legal reasons). Per the wiki, the displace_session does indeed play back a tone every 15 seconds. But I'm afraid it never bridges the call.. It's probably something stupid, but what am I doing wrong here? I hear the intial beep after dialing the number but no early media with dead air on the line. What is the best way to insert a tone every x seconds while both legs of the call are in progress and so that each party hears the tone?
Also, when testing this without tone_stream, the recording works (horaah) but the recording itself is really ssssssssllllooowwwwww. I am still working on that one, its probably in the wiki, i'm looking now, but if anyone has a suggestion let me know.
Best regards,
Robert Stevens
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
if you want displace session to mux you have to supply the m flag <action application="displace_session" data="file.wav m"/> On Mon, Oct 29, 2012 at 7:09 PM, Michael Collins <msc@freeswitch.org> wrote:
Sounds like this is something that's more ad-hoc, so you might want to do a quick and dirty combo of Lua and sched_api. Roughly it would look something like this:
<action application="bridge" data="{api_on_answer='luarun beep.lua ${uuid} 15'}sofia/gateway/my_gw/18005551212"/>
Then have beep.lua be something like this: -- beep.lua uuid = argv[1] if ( uuid == nil ) then freeswitch.consoleLog("WARNING","No uuid specified, exiting...\n") return "exit" end
interval = argv[2] if ( interval == nil ) then interval = 15 end
api = freeswitch.API() dump = api:execute('uuid_dump',uuid); test = string.sub(dump,1,4) if ( test == '-ERR' ) then freeswitch.consoleLog("INFO","UUID " .. uuid .. " not present, ending the beeps\n") else -- grab the other leg's uuid other_leg = api:execute('uuid_getvar',uuid .. ' bridge_to')
-- uuid_displace to both legs with muxing on so that parties can still hear each other -- set the v=-xx to an appropriate dB value for the volume you want -- change the '40' to a higher number to make the beep duration longer command = ' start tone_stream://v=-18;%(40,0,1000) mux' api:execute('uuid_displace',uuid .. command) api:execute('uuid_displace',other_leg .. command)
-- queue it up to run again in <interval> seconds api:execute('sched_api',' +' .. interval .. ' none luarun beep.lua ' .. uuid .. ' ' .. interval) end
Remember, standard disclaimer<http://wiki.freeswitch.org/wiki/Reporting_Bugs#Standard_Disclaimer>applies, so tinker with it before you report back that it does not work. If you get it working then it would be great if you could pay the wiki tax and put it up there as an example of what can be done w/ sched_api and Lua.
-MC
On Mon, Oct 29, 2012 at 5:12 AM, Yuriy Nasida <nasida@live.ru> wrote:
I can be wrong but most likely it is possible via event_socket only. So you have to listen events on FS from some script and when the call is bridged, the script must playback the beep to both legs.
------------------------------ From: rstevens@robcoit.com Date: Mon, 29 Oct 2012 00:03:51 -0400 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Recording calls with a beep
Hi All,
I have been searching the wiki for a good way to insert a beep every 10 seconds into a call that is being recorded (I plan on recording all calls to Comcast from here on out). This is my dialplan:
<extension name="CallCentric.18002662278" > <condition field="destination_number" expression="18002662278" > <action application="set" data="sip_h_X-accountcode=${accountcode}" /> <action application="set" data="sip_h_X-Tag=" /> <action application="set" data="call_direction=outbound" /> <action application="set" data="hangup_after_bridge=true" /> <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}" /> <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}" /> <action application="set" data="inherit_codec=true" /> <action application="set" data="RECORD_TITLE=Recording ${destination_number} ${caller_id_number} ${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_COPYRIGHT=(c) 2012" /> <action application="set" data="RECORD_ARTIST=FreeSwitch" /> <action application="set" data="RECORD_COMMENT=FreeSwitch" /> <action application="set" data="RECORD_DATE=${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_STEREO=true" /> <action application="displace_session" data="tone_stream://%(100,15000,800);loops=-1" /> <action application="record_session" data="$${base_dir}/recordings/archive/${strftime(%Y-%m-%d-%H-%M-%S)}_${destination_number}_${caller_id_number}.wav" /> <action application="bridge" data="sofia/gateway/CallCentric/ 18002662278" />
</condition> </extension>
I would also like to playback a tone so they know I'm recording them (for legal reasons). Per the wiki, the displace_session does indeed play back a tone every 15 seconds. But I'm afraid it never bridges the call.. It's probably something stupid, but what am I doing wrong here? I hear the intial beep after dialing the number but no early media with dead air on the line. What is the best way to insert a tone every x seconds while both legs of the call are in progress and so that each party hears the tone?
Also, when testing this without tone_stream, the recording works (horaah) but the recording itself is really ssssssssllllooowwwwww. I am still working on that one, its probably in the wiki, i'm looking now, but if anyone has a suggestion let me know.
Best regards,
Robert Stevens
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-usersUNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900
Ok. I will try this. Best regards, Robert Stevens On Oct 29, 2012, at 9:01 PM, Anthony Minessale <anthony.minessale@gmail.com> wrote:
if you want displace session to mux you have to supply the m flag
<action application="displace_session" data="file.wav m"/>
On Mon, Oct 29, 2012 at 7:09 PM, Michael Collins <msc@freeswitch.org> wrote:
Sounds like this is something that's more ad-hoc, so you might want to do a quick and dirty combo of Lua and sched_api. Roughly it would look something like this:
<action application="bridge" data="{api_on_answer='luarun beep.lua ${uuid} 15'}sofia/gateway/my_gw/18005551212"/>
Then have beep.lua be something like this: -- beep.lua uuid = argv[1] if ( uuid == nil ) then freeswitch.consoleLog("WARNING","No uuid specified, exiting...\n") return "exit" end
interval = argv[2] if ( interval == nil ) then interval = 15 end
api = freeswitch.API() dump = api:execute('uuid_dump',uuid); test = string.sub(dump,1,4) if ( test == '-ERR' ) then freeswitch.consoleLog("INFO","UUID " .. uuid .. " not present, ending the beeps\n") else -- grab the other leg's uuid other_leg = api:execute('uuid_getvar',uuid .. ' bridge_to')
-- uuid_displace to both legs with muxing on so that parties can still hear each other -- set the v=-xx to an appropriate dB value for the volume you want -- change the '40' to a higher number to make the beep duration longer command = ' start tone_stream://v=-18;%(40,0,1000) mux' api:execute('uuid_displace',uuid .. command) api:execute('uuid_displace',other_leg .. command)
-- queue it up to run again in <interval> seconds api:execute('sched_api',' +' .. interval .. ' none luarun beep.lua ' .. uuid .. ' ' .. interval) end
Remember, standard disclaimer applies, so tinker with it before you report back that it does not work. If you get it working then it would be great if you could pay the wiki tax and put it up there as an example of what can be done w/ sched_api and Lua.
-MC
On Mon, Oct 29, 2012 at 5:12 AM, Yuriy Nasida <nasida@live.ru> wrote:
I can be wrong but most likely it is possible via event_socket only. So you have to listen events on FS from some script and when the call is bridged, the script must playback the beep to both legs.
From: rstevens@robcoit.com Date: Mon, 29 Oct 2012 00:03:51 -0400 To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Recording calls with a beep
Hi All,
I have been searching the wiki for a good way to insert a beep every 10 seconds into a call that is being recorded (I plan on recording all calls to Comcast from here on out). This is my dialplan:
<extension name="CallCentric.18002662278" > <condition field="destination_number" expression="18002662278" > <action application="set" data="sip_h_X-accountcode=${accountcode}" /> <action application="set" data="sip_h_X-Tag=" /> <action application="set" data="call_direction=outbound" /> <action application="set" data="hangup_after_bridge=true" /> <action application="set" data="effective_caller_id_name=${outbound_caller_id_name}" /> <action application="set" data="effective_caller_id_number=${outbound_caller_id_number}" /> <action application="set" data="inherit_codec=true" /> <action application="set" data="RECORD_TITLE=Recording ${destination_number} ${caller_id_number} ${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_COPYRIGHT=(c) 2012" /> <action application="set" data="RECORD_ARTIST=FreeSwitch" /> <action application="set" data="RECORD_COMMENT=FreeSwitch" /> <action application="set" data="RECORD_DATE=${strftime(%Y-%m-%d %H:%M)}" /> <action application="set" data="RECORD_STEREO=true" /> <action application="displace_session" data="tone_stream://%(100,15000,800);loops=-1" /> <action application="record_session" data="$${base_dir}/recordings/archive/${strftime(%Y-%m-%d-%H-%M-%S)}_${destination_number}_${caller_id_number}.wav" /> <action application="bridge" data="sofia/gateway/CallCentric/18002662278" />
</condition> </extension>
I would also like to playback a tone so they know I'm recording them (for legal reasons). Per the wiki, the displace_session does indeed play back a tone every 15 seconds. But I'm afraid it never bridges the call.. It's probably something stupid, but what am I doing wrong here? I hear the intial beep after dialing the number but no early media with dead air on the line. What is the best way to insert a tone every x seconds while both legs of the call are in progress and so that each party hears the tone?
Also, when testing this without tone_stream, the recording works (horaah) but the recording itself is really ssssssssllllooowwwwww. I am still working on that one, its probably in the wiki, i'm looking now, but if anyone has a suggestion let me know.
Best regards,
Robert Stevens
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Michael S Collins Twitter: @mercutioviz http://www.FreeSWITCH.org http://www.ClueCon.com http://www.OSTAG.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900 _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Anthony Minessale
-
Michael Collins
-
Robert Stevens
-
Yuriy Nasida