Thanks for the reply Mike. Anthony gave me the heads up on irc that NAT head been simplified in 1.0.6 - so I looked at the cnf file. # NAT/Firewall Traversal nat_enable: "1" nat_address: "71.xxx.60.xxx" voip_control_port: "5900" start_media_port: "16384" end_media_port: "32766" nat_received_processing: "0" Setting nat_received_processing: "1" did the trick and the Cisco phone is now registering correctly again. Cheers On Sat, Apr 24, 2010 at 3:23 PM, Michael Jerris <mike@jerris.com> wrote:

can you provide any logs of the failure?

On Apr 23, 2010, at 1:55 PM, Phillip Jones wrote:

...

Hi there,

I have been using my Cisco phones registered with FreeSWITCH (1.0.4) for months now. Today I upgraded to 1.0.6 and they no longer registers.

This what configured to get them to work.

1) Add

<list name="lan" default="allow"> <node type="allow" cidr="71.**5.60.***/32"/>

to acl.conf.xml

2) Add the appropriate directory entry.

That worked (may be it shouldn't have done) - but on 1.0.6 (today's trunk) is fails.

Is something else required in 1.0.6 do you know?

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org