Hi all, the wiki provides information about how to receive an inbound call http://wiki.freeswitch.org/wiki/Getting_Started_Guide#Receiving_an_inbound_c all_from_a_Gateway The problem is that I can have only one DID per gateway. I would like to use one gateway that will allow several FS extensions (Virtual Numbers) to make calls, and point several different DIDs to these extensions individually. Is that possible ? thanks Jair Santos
You don't setup gateways to receive calls. You can just have your provider send as many did's at you as they feel free to send. Just don't auth-calls on that profile that all the did's hit. A gateway has nothing to do with DID's it just registers to the far side and is used when they challenge us. /b On Sep 10, 2008, at 8:01 PM, Jair Santos wrote:
Hi all,
the wiki provides information about how to receive an inbound call
http://wiki.freeswitch.org/wiki/Getting_Started_Guide#Receiving_an_inbound_c...
The problem is that I can have only one DID per gateway.
I would like to use one gateway that will allow several FS extensions (Virtual Numbers) to make calls, and point several different DIDs to these extensions individually. Is that possible ?
thanks
Jair Santos
If the provider send me, say 100 DIDs, can I point each of them to a different extension ? So I'll have 100 DIDs each of them ringing on a different extension? Is this the correct config ? <extension name="DID01"> <condition field="destination_number" expression="15555551212"> <action application="transfer" data="1001 XML default"/> </condition> </extension> <extension name="DID02"> <condition field="destination_number" expression="15425657888"> <action application="transfer" data="1002 XML default"/> </condition> </extension> Jair Santos -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Brian West Sent: Wednesday, September 10, 2008 6:10 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FS and DIDs You don't setup gateways to receive calls. You can just have your provider send as many did's at you as they feel free to send. Just don't auth-calls on that profile that all the did's hit. A gateway has nothing to do with DID's it just registers to the far side and is used when they challenge us. /b On Sep 10, 2008, at 8:01 PM, Jair Santos wrote: Hi all, the wiki provides information about how to receive an inbound call http://wiki.freeswitch.org/wiki/Getting_Started_Guide#Receiving_an_inbound_c all_from_a_Gateway The problem is that I can have only one DID per gateway. I would like to use one gateway that will allow several FS extensions (Virtual Numbers) to make calls, and point several different DIDs to these extensions individually. Is that possible ? thanks Jair Santos
can we announce the didx partnership for freeswitch ?
Shouldn't be a problem. /b
On Sep 10, 2008, at 8:34 PM, Jair Santos wrote:
If the provider send me, say 100 DIDs, can I point each of them to a different extension ?
Rehan Ahmed AllahWala Msn/Yahoo/GoogleTalk/Email: Rehan@Rehan.com http://www.supertec.com/ - Internet Telephony Solutions Http://www.DIDX.net - DID Number Market Place. Don't Remember Me ? Visit http://www.Rehan.com ~~~~~~~~~~~~~~~~~~~ "First they ignore you, then they laugh at you, then they fight you, then you win." By Gandhi. "Live as if you were to die tomorrow. Learn as if you were to live forever." - Gandhi
you could also have a single dial-plan extension that did a condition based on host. Mike On Sep 10, 2008, at 9:34 PM, Jair Santos wrote:
If the provider send me, say 100 DIDs, can I point each of them to a different extension ?
So I'll have 100 DIDs each of them ringing on a different extension?
Is this the correct config ?
<extension name="DID01"> <condition field="destination_number" expression="15555551212"> <action application="transfer" data="1001 XML default"/> </condition> </extension>
<extension name="DID02"> <condition field="destination_number" expression="15425657888"> <action application="transfer" data="1002 XML default"/> </condition> </extension>
Jair Santos
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org ] On Behalf Of Brian West Sent: Wednesday, September 10, 2008 6:10 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] FS and DIDs
You don't setup gateways to receive calls. You can just have your provider send as many did's at you as they feel free to send. Just don't auth-calls on that profile that all the did's hit. A gateway has nothing to do with DID's it just registers to the far side and is used when they challenge us.
/b
On Sep 10, 2008, at 8:01 PM, Jair Santos wrote:
Hi all,
the wiki provides information about how to receive an inbound call
http://wiki.freeswitch.org/wiki/Getting_Started_Guide#Receiving_an_inbound_c...
The problem is that I can have only one DID per gateway.
I would like to use one gateway that will allow several FS extensions (Virtual Numbers) to make calls, and point several different DIDs to these extensions individually. Is that possible ?
thanks
Jair Santos
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
How would that look? Michael Jerris wrote:
you could also have a single dial-plan extension that did a condition based on host.
Mike
On Sep 10, 2008, at 9:34 PM, Jair Santos wrote:
If the provider send me, say 100 DIDs, can I point each of them to a different extension ?
So I'll have 100 DIDs each of them ringing on a different extension?
Is this the correct config ?
<extension name="DID01"> <condition field="destination_number" expression="15555551212"> <action application="transfer" data="1001 XML default"/> </condition> </extension>
<extension name="DID02"> <condition field="destination_number" expression="15425657888"> <action application="transfer" data="1002 XML default"/> </condition> </extension>
Jair Santos
-----Original Message----- *From:* freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Brian West *Sent:* Wednesday, September 10, 2008 6:10 PM *To:* freeswitch-users@lists.freeswitch.org <mailto:freeswitch-users@lists.freeswitch.org> *Subject:* Re: [Freeswitch-users] FS and DIDs
You don't setup gateways to receive calls. You can just have your provider send as many did's at you as they feel free to send. Just don't auth-calls on that profile that all the did's hit. A gateway has nothing to do with DID's it just registers to the far side and is used when they challenge us.
/b
On Sep 10, 2008, at 8:01 PM, Jair Santos wrote:
Hi all,
the wiki provides information about how to receive an inbound call
http://wiki.freeswitch.org/wiki/Getting_Started_Guide#Receiving_an_inbound_c...
The problem is that I can have only one DID per gateway.
I would like to use one gateway that will allow several FS extensions (Virtual Numbers) to make calls, and point several different DIDs to these extensions individually. Is that possible ?
thanks
Jair Santos
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org <mailto:Freeswitch-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
------------------------------------------------------------------------
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You don't setup gateways to receive calls. You can just have your provider send as many did's at you as they feel free to send. Just don't auth-calls on that profile that all the did's hit. A gateway has nothing to do with DID's it just registers to the far side and is used when they challenge us. /b Brian, Thank you!! Your words that I've put in bold are highly critical to understanding what a gateway is used for, and conversely, what it is not used for. On a hunch I searched the wiki for the word "gateway" and I didn't find a single page that presents this information. I would like to propose that we create a page like "What is a gateway and why do I need one" that could be a smaller part of the bigger SIP/VoIP documentation picture. We could then link to that page from the GSG as well as link back to the GSG and other relevant topics from the GW page. Or perhaps someone has another idea we could discuss. Thoughts from the community? Thanks, MC
According to my understanding, in FS, a gateway is a mechanism for the FS to authenticate when making outgoing calls. If you wish to receive a mixture of SIP calls on the same IP/port on FS you are pretty bound to the same SIP Profile settings for all those inbound entities. On other softswitch platforms (mainly commercial ones), a gateway is usually a reference to a trunk connection or an aggregation of multiple end-points – all within the context of the same domain/ip/port. In analogy to FS, it’s a sip-profile within a sip-profile. On those platforms, you can have different SIP/Sofia Profile settings on the same ip/port per inbound end-point. This allows you to allow TLS for particular users, have password OR IP authentication, set different keep-alive mechanisms, enable/disable CNG, VAD, codecs and so on. I hope Brian words were specific for the current FS build until such sofia-setting-per-gateway functionality is added in the future, as I do see the need for having gateway (SIP-Sub-Profile) definition for inbound calls. I might be all wrong and FS does facilitate for such functionality in a way I wasn’t aware of. _____ From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Collins Sent: Thursday, September 11, 2008 3:29 PM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] FS Documentation Idea (was RE: FS and DIDs) You don't setup gateways to receive calls. You can just have your provider send as many did's at you as they feel free to send. Just don't auth-calls on that profile that all the did's hit. A gateway has nothing to do with DID's it just registers to the far side and is used when they challenge us. /b Brian, Thank you!! Your words that I’ve put in bold are highly critical to understanding what a gateway is used for, and conversely, what it is not used for. On a hunch I searched the wiki for the word “gateway” and I didn’t find a single page that presents this information. I would like to propose that we create a page like “What is a gateway and why do I need one” that could be a smaller part of the bigger SIP/VoIP documentation picture. We could then link to that page from the GSG as well as link back to the GSG and other relevant topics from the GW page. Or perhaps someone has another idea we could discuss. Thoughts from the community? Thanks, MC No virus found in this incoming message. Checked by AVG - http://www.avg.com Version: 8.0.169 / Virus Database: 270.6.19/1665 - Release Date: 10/09/2008 19:00
Various behaviors can already be changed using variables on the same profile. Along with ip auth per user.. and many more. /b On Sep 11, 2008, at 1:32 AM, UV wrote:
I might be all wrong and FS does facilitate for such functionality in a way I wasn’t aware of.
Brian West sip:brian@freeswitch.org
participants (7)
-
Brian West
-
Jair Santos
-
Michael Collins
-
Michael Jerris
-
Rehan Allah Wala
-
Shawn Lewis
-
UV