Consider the following sequence: 1) Outside caller (OC) calls Ext 1001 Caller id shows OC 2) Ext 1001 transfers the call to Ext 1002 In some cases we want the caller id to shows OC, in other cases we want the caller id to show Ext 1001. It appears from some limited testing that the original caller id is always shown when the call is transfered. Is there some way to have the person making the transfer show up as the caller id? Our application is I want to setup an extension (*5) which automatically places calls into a fifo corresponding to the Extension number of the person transferring the call. This will provide park capability similar to that of our old System 25 PBX. I'll then setup an extension (*8<fifo>) which picks up the call at the front of the fifo "fifo". -- John ------------------------------------------------------------------------- | Feith Systems | Voice: 1-215-646-8000 | Email: john@feith.com | | John Wehle | Fax: 1-215-540-5495 | | -------------------------------------------------------------------------