How to find destination IP address of b-leg in "show calls" or alike?
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time. Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg? I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then? Few cents on my call scenario: SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form). Many thanks, -Victor
its in show channels, and its in the view over calls and channels.
On Sep 1, 2016, at 2:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
uuid_dump should show all variables On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, that would be for a specific call. Anything that will do for all calls at once? Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike? uuid_dump should show all variables On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On 1 September 2016 at 19:11, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Isn't this also seen in the freeswitch database (non-cdr) when calls are in progress? -- ------- inum: 883510009027723 sip: jungleboogie@sip2sip.info
it's in the core.db database (you have tablesL channels, calls, basic_calls, detailed_calls) where you can find this info On Fri, Sep 2, 2016 at 11:49 AM, jungle Boogie <jungleboogie0@gmail.com> wrote:
On 1 September 2016 at 19:11, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Isn't this also seen in the freeswitch database (non-cdr) when calls are in progress?
-- ------- inum: 883510009027723 sip: jungleboogie@sip2sip.info
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Abaci, Jungle Boogie, good idea, I'll look into this. I didn't tinker with FS DB previously so it didn't cross my mind. Thanks again, -Victor On 16-09-02 12:22 PM, Abaci B wrote:
it's in the core.db database (you have tablesL channels, calls, basic_calls, detailed_calls) where you can find this info
On Fri, Sep 2, 2016 at 11:49 AM, jungle Boogie <jungleboogie0@gmail.com <mailto:jungleboogie0@gmail.com>> wrote:
On 1 September 2016 at 19:11, Victor Chukalovskiy <victor.chukalovskiy@gmail.com <mailto:victor.chukalovskiy@gmail.com>> wrote: > Thank you, that would be for a specific call. Anything that will do for all calls at once?
Isn't this also seen in the freeswitch database (non-cdr) when calls are in progress?
-- ------- inum: 883510009027723 sip: jungleboogie@sip2sip.info <mailto:jungleboogie@sip2sip.info>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com>
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org <http://confluence.freeswitch.org> http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
see my previous answer to this question on this thread. You don’t need to mess with anything, its already there.
On Sep 1, 2016, at 10:11 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike?
uuid_dump should show all variables
On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
Michael, saw your answer thank you. Yes, would prefer not to mess with DB. I searched and I couldn't find the value of ${network_address} in "show channels" output. I'm on 1.6.6 still if it matters. Here is the header row of "show channels": uuid,direction,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,read_bit_rate,write_codec,write_rate,write_bit_rate,secure,hostname,presence_id,presence_data,callstate,callee_name,callee_num,callee_direction,call_uuid,sent_callee_name,sent_callee_num,initial_cid_name,initial_cid_num,initial_ip_addr,initial_dest,initial_dialplan,initial_context "network_address" isn't there :( On 16-09-02 12:34 PM, Michael Jerris wrote:
see my previous answer to this question on this thread. You don’t need to mess with anything, its already there.
On Sep 1, 2016, at 10:11 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike?
uuid_dump should show all variables
On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
look at the actual data. it doesn’t have the same name ...
On Sep 2, 2016, at 12:47 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Michael, saw your answer thank you. Yes, would prefer not to mess with DB.
I searched and I couldn't find the value of ${network_address} in "show channels" output. I'm on 1.6.6 still if it matters. Here is the header row of "show channels":
uuid,direction,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,read_bit_rate,write_codec,write_rate,write_bit_rate,secure,hostname,presence_id,presence_data,callstate,callee_name,callee_num,callee_direction,call_uuid,sent_callee_name,sent_callee_num,initial_cid_name,initial_cid_num,initial_ip_addr,initial_dest,initial_dialplan,initial_context
"network_address" isn't there :(
On 16-09-02 12:34 PM, Michael Jerris wrote:
see my previous answer to this question on this thread. You don’t need to mess with anything, its already there.
On Sep 1, 2016, at 10:11 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike?
uuid_dump should show all variables
On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
The IP I saw in the actual "show channels" dump represents the value of the far-end signaling IP for incoming (a-leg) of the call. However, for b-leg of the call the IP value printed is the far-end IP of the corresponding a-leg. So the variable is not just named differently, but also doesn't contain expected value for the b-leg of the call. On 16-09-02 01:22 PM, Michael Jerris wrote:
look at the actual data. it doesn’t have the same name ...
On Sep 2, 2016, at 12:47 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Michael, saw your answer thank you. Yes, would prefer not to mess with DB.
I searched and I couldn't find the value of ${network_address} in "show channels" output. I'm on 1.6.6 still if it matters. Here is the header row of "show channels":
uuid,direction,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,read_bit_rate,write_codec,write_rate,write_bit_rate,secure,hostname,presence_id,presence_data,callstate,callee_name,callee_num,callee_direction,call_uuid,sent_callee_name,sent_callee_num,initial_cid_name,initial_cid_num,initial_ip_addr,initial_dest,initial_dialplan,initial_context
"network_address" isn't there :(
On 16-09-02 12:34 PM, Michael Jerris wrote:
see my previous answer to this question on this thread. You don’t need to mess with anything, its already there.
On Sep 1, 2016, at 10:11 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike?
uuid_dump should show all variables
On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That doesn’t sound right to me. Are you sure?
On Sep 2, 2016, at 2:22 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
The IP I saw in the actual "show channels" dump represents the value of the far-end signaling IP for incoming (a-leg) of the call. However, for b-leg of the call the IP value printed is the far-end IP of the corresponding a-leg. So the variable is not just named differently, but also doesn't contain expected value for the b-leg of the call.
On 16-09-02 01:22 PM, Michael Jerris wrote:
look at the actual data. it doesn’t have the same name ...
On Sep 2, 2016, at 12:47 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Michael, saw your answer thank you. Yes, would prefer not to mess with DB.
I searched and I couldn't find the value of ${network_address} in "show channels" output. I'm on 1.6.6 still if it matters. Here is the header row of "show channels":
uuid,direction,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,read_bit_rate,write_codec,write_rate,write_bit_rate,secure,hostname,presence_id,presence_data,callstate,callee_name,callee_num,callee_direction,call_uuid,sent_callee_name,sent_callee_num,initial_cid_name,initial_cid_num,initial_ip_addr,initial_dest,initial_dialplan,initial_context
"network_address" isn't there :(
On 16-09-02 12:34 PM, Michael Jerris wrote:
see my previous answer to this question on this thread. You don’t need to mess with anything, its already there.
On Sep 1, 2016, at 10:11 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike?
uuid_dump should show all variables
On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Good day, I've been studying output of "show calls", "show detailed calls", and "show channels" for quite some time.
Surprisingly, I can't find a value of ${network_address} variable or anything similar that will tell me for each outgoing leg SIP IP address on the far end. In other words, how do I find IP address of SIP UAS FreeSWITCH is communicating with on every outgoing call leg?
I managed to get it in CDRs by dumping ${network_address}, but can't get it for active calls dump. Is there truly nothing in "show calls" or equivalent that will help me? Should I submit a feature request then?
Few cents on my call scenario:
SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). I'm originating my b-legs via sofia gateways (so IP address of the far-end is picked up from gateway config, and not mentioned in the dial-plan in any way or form).
Many thanks,
-Victor
I'm quite sure. I even checked in core.db table "detailed_calls". What I see is that the value of "ip_addr" column is always that same as value of "b_ip_addr" column. Both columns contain IP of the UAC that initiated the call towards FS on the a-leg. Table "detailed_calls" does not have any column that would have the expected value (IP of the UAS that FS is talking to on the b-leg). On 16-09-02 02:46 PM, Michael Jerris wrote:
That doesn’t sound right to me. Are you sure?
On Sep 2, 2016, at 2:22 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
The IP I saw in the actual "show channels" dump represents the value of the far-end signaling IP for incoming (a-leg) of the call. However, for b-leg of the call the IP value printed is the far-end IP of the corresponding a-leg. So the variable is not just named differently, but also doesn't contain expected value for the b-leg of the call.
On 16-09-02 01:22 PM, Michael Jerris wrote:
look at the actual data. it doesn’t have the same name ...
On Sep 2, 2016, at 12:47 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Michael, saw your answer thank you. Yes, would prefer not to mess with DB.
I searched and I couldn't find the value of ${network_address} in "show channels" output. I'm on 1.6.6 still if it matters. Here is the header row of "show channels":
uuid,direction,created,created_epoch,name,state,cid_name,cid_num,ip_addr,dest,application,application_data,dialplan,context,read_codec,read_rate,read_bit_rate,write_codec,write_rate,write_bit_rate,secure,hostname,presence_id,presence_data,callstate,callee_name,callee_num,callee_direction,call_uuid,sent_callee_name,sent_callee_num,initial_cid_name,initial_cid_num,initial_ip_addr,initial_dest,initial_dialplan,initial_context
"network_address" isn't there :(
On 16-09-02 12:34 PM, Michael Jerris wrote:
see my previous answer to this question on this thread. You don’t need to mess with anything, its already there.
On Sep 1, 2016, at 10:11 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote:
Thank you, that would be for a specific call. Anything that will do for all calls at once?
Original Message From: Stanislav Sinyagin Sent: Thursday, September 1, 2016 21:16 To: FreeSWITCH Users Help Reply To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] How to find destination IP address of b-leg in "show calls" or alike?
uuid_dump should show all variables
On Thu, Sep 1, 2016 at 8:49 PM, Victor Chukalovskiy <victor.chukalovskiy@gmail.com> wrote: > Good day, I've been studying output of "show calls", "show detailed > calls", and "show channels" for quite some time. > > Surprisingly, I can't find a value of ${network_address} variable or > anything similar that will tell me for each outgoing leg SIP IP address > on the far end. In other words, how do I find IP address of SIP UAS > FreeSWITCH is communicating with on every outgoing call leg? > > I managed to get it in CDRs by dumping ${network_address}, but can't get > it for active calls dump. Is there truly nothing in "show calls" or > equivalent that will help me? Should I submit a feature request then? > > Few cents on my call scenario: > > SIP call coming in (a-leg) --> multiple sip calls going out (b-legs). > I'm originating my b-legs via sofia gateways (so IP address of the > far-end is picked up from gateway config, and not mentioned in the > dial-plan in any way or form). > > Many thanks, > > -Victor
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (5)
-
Abaci B
-
jungle Boogie
-
Michael Jerris
-
Stanislav Sinyagin
-
Victor Chukalovskiy