Hi, I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed? On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here? Thanks in advance, Joe Bain
Joe, A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org? Thanks, MC On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Thanks in advance,
Joe Bain _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Thanks in advance,
Joe Bain _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org 2008/12/8 Michael Collins <msc@freeswitch.org>
Joe,
A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org?
Thanks, MC
Hi, I'm running "FreeSWITCH Version 1.0.trunk (10175M)" on Windows. I can post the dialplan and lua script though at the moment I can't seem to log in to the pastebin, I just became a member on the freeswitch homepage but the pass/username isn't being accepted. Joe
Did you read carefully when asked to provide login and password? The login and password is there, don't use your own freeswitch login. Ivan Den 9. des.. 2008 kl. 10:27 skrev Joe Bain:
On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Thanks in advance,
Joe Bain _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org 2008/12/8 Michael Collins <msc@freeswitch.org> Joe,
A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org?
Thanks, MC Hi,
I'm running "FreeSWITCH Version 1.0.trunk (10175M)" on Windows. I can post the dialplan and lua script though at the moment I can't seem to log in to the pastebin, I just became a member on the freeswitch homepage but the pass/username isn't being accepted.
Joe _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
2008/12/9 Ivan C Myrvold <ivan@myrvold.org>
Did you read carefully when asked to provide login and password? The login and password is there, don't use your own freeswitch login.
Ivan
Den 9. des.. 2008 kl. 10:27 skrev Joe Bain:
On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Thanks in advance,
Joe Bain _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org 2008/12/8 Michael Collins <msc@freeswitch.org>
Joe,
A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org?
Thanks, MC
Hi,
I'm running "FreeSWITCH Version 1.0.trunk (10175M)" on Windows. I can post the dialplan and lua script though at the moment I can't seem to log in to the pastebin, I just became a member on the freeswitch homepage but the pass/username isn't being accepted.
Joe _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ah, I should have read more carefully! The dialplan is here <http://pastebin.freeswitch.org/6372> and the two important lua scripts are here <http://pastebin.freeswitch.org/6371> and here <http://pastebin.freeswitch.org/6370>, the first calls the second. I didn't include all the Lua script as the problem appears right at the start (as well as throughout) if the user hangs up when the IVR is speaking (asking for an id number) then it seems to never get a hangup and loops trying to get the id number. Joe
Ok I have been testing more and I have reduced my problem to a pretty short and simple Lua script. I've posted it at http://pastebin.freeswitch.org/6373 and this gets called straight from the dialplan. From my experience so far it only exits after a caller hangup about 1 in 10 times. Most of the time it continues to loop until I do 'hupall'. Thanks in advance if anyone can solve this or offer any advice. Joe 2008/12/9 Joe Bain <mrjoebain@gmail.com>
2008/12/9 Ivan C Myrvold <ivan@myrvold.org>
Did you read carefully when asked to provide login and password? The
login and password is there, don't use your own freeswitch login.
Ivan
Den 9. des.. 2008 kl. 10:27 skrev Joe Bain:
On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Thanks in advance,
Joe Bain _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org 2008/12/8 Michael Collins <msc@freeswitch.org>
Joe,
A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org?
Thanks, MC
Hi,
I'm running "FreeSWITCH Version 1.0.trunk (10175M)" on Windows. I can post the dialplan and lua script though at the moment I can't seem to log in to the pastebin, I just became a member on the freeswitch homepage but the pass/username isn't being accepted.
Joe _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Ah, I should have read more carefully!
The dialplan is here <http://pastebin.freeswitch.org/6372> and the two important lua scripts are here <http://pastebin.freeswitch.org/6371> and here <http://pastebin.freeswitch.org/6370>, the first calls the second. I didn't include all the Lua script as the problem appears right at the start (as well as throughout) if the user hangs up when the IVR is speaking (asking for an id number) then it seems to never get a hangup and loops trying to get the id number.
Joe
On Dec 9, 2008, at 9:10 AM, Joe Bain wrote:
Ok I have been testing more and I have reduced my problem to a pretty short and simple Lua script. I've posted it at http://pastebin.freeswitch.org/6373 and this gets called straight from the dialplan. From my experience so far it only exits after a caller hangup about 1 in 10 times. Most of the time it continues to loop until I do 'hupall'.
Thanks in advance if anyone can solve this or offer any advice.
Joe
2008/12/9 Joe Bain <mrjoebain@gmail.com> 2008/12/9 Ivan C Myrvold <ivan@myrvold.org>
Did you read carefully when asked to provide login and password? The login and password is there, don't use your own freeswitch login.
Ivan
Den 9. des.. 2008 kl. 10:27 skrev Joe Bain:
On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Joe,
A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org?
Thanks, MC Hi,
I'm running "FreeSWITCH Version 1.0.trunk (10175M)" on Windows. I can post the dialplan and lua script though at the moment I can't seem to log in to the pastebin, I just became a member on the freeswitch homepage but the pass/username isn't being accepted.
Joe
Ah, I should have read more carefully!
The dialplan is here and the two important lua scripts are here and here, the first calls the second. I didn't include all the Lua script as the problem appears right at the start (as well as throughout) if the user hangs up when the IVR is speaking (asking for an id number) then it seems to never get a hangup and loops trying to get the id number.
Joe
We just tested this with current svn trunk and it appears to work fine, could you try updating and see if it is still a problem for you Mike
2008/12/9 Michael Jerris <mike@jerris.com>
On Dec 9, 2008, at 9:10 AM, Joe Bain wrote:
Ok I have been testing more and I have reduced my problem to a pretty short and simple Lua script. I've posted it at http://pastebin.freeswitch.org/6373 and this gets called straight from the dialplan. From my experience so far it only exits after a caller hangup about 1 in 10 times. Most of the time it continues to loop until I do 'hupall'.
Thanks in advance if anyone can solve this or offer any advice.
Joe
2008/12/9 Joe Bain <mrjoebain@gmail.com>
2008/12/9 Ivan C Myrvold <ivan@myrvold.org>
Did you read carefully when asked to provide login and password? The
login and password is there, don't use your own freeswitch login.
Ivan
Den 9. des.. 2008 kl. 10:27 skrev Joe Bain:
On Mon, Dec 8, 2008 at 8:57 AM, Joe Bain <mrjoebain@gmail.com> wrote:
Hi,
I'm writing an IVR in Lua and am having problems dealing with hangups cleanly. Very often session:ready() reports true long after I have hung up and the hangup hook function I have set doesn't get called either. It seems to report that the session is active indefinitely in some cases where a loop keeps trying to get some dtmf key presses. Is there any trick to using session:ready() or the hangup hook that I might have missed?
On a slightly related point I can't seem to access the session properties, e.g. session.caller_id_num has a value of nil. Any thoughts here?
Joe,
A few questions... what svn rev are you running? Which operating system? Finally, is it possible for you to put your dialplan and Lua script up at pastebin.freeswitch.org?
Thanks, MC
Hi,
I'm running "FreeSWITCH Version 1.0.trunk (10175M)" on Windows. I can post the dialplan and lua script though at the moment I can't seem to log in to the pastebin, I just became a member on the freeswitch homepage but the pass/username isn't being accepted.
Joe
Ah, I should have read more carefully!
The dialplan is here <http://pastebin.freeswitch.org/6372> and the two important lua scripts are here <http://pastebin.freeswitch.org/6371> and here <http://pastebin.freeswitch.org/6370>, the first calls the second. I didn't include all the Lua script as the problem appears right at the start (as well as throughout) if the user hangs up when the IVR is speaking (asking for an id number) then it seems to never get a hangup and loops trying to get the id number.
Joe
We just tested this with current svn trunk and it appears to work fine, could you try updating and see if it is still a problem for you
Mike
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I have to install FS on our server soon so when I do I'll see if the problem is still there. Though I'm testing on Vista and the server won't be running that so if the problem doesn't reappear it may not be conclusive. If I have any spare time I'll try a reinstall on my test machine but I probably won't unfortunately, my contract ends on wednesday at the company I'm working for. Thanks for your help. Joe
participants (4)
-
Ivan C Myrvold
-
Joe Bain
-
Michael Collins
-
Michael Jerris