From FreeSWITCH you can't force and endpoint to register... thats the endpoints job... what you're doing is just flushing the reg out of FreeSWITCH so now it can't find the endpoint... Try adding a reboot on there maybe i'll reboot the device and cause it to register again... /b On Oct 27, 2009, at 12:33 PM, Lars Zeb wrote:

Is the following the correct command to force registration of an endpoint below which is not showing up in ‘sofia status profile internal’ currently, but when it does it looks like the following?

Call-ID: mjkg8c3zlqwjzfd.hrt5 User: 1019@192.168.10.29 Contact: "user" <sip:1019@192.168.10.103;line=3852> Agent: snom-m3-SIP/02.02 (MAC=0004132A31C7; HW=1) Status: Registered(UDP)(unknown) EXP(2009-10-27 10:46:07) Host: fs IP: 192.168.10.103 Port: 5060 Auth-User: 1019 Auth-Realm: 192.168.10.29 MWI-Account: 1019@192.168.10.29

sofia profile internal flush_inbound_reg 1019@192.168.10.29

Thanks Lars