Hello, I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I see traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register? I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS. <list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list> <!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
What do you see in "sofia status" output? It should list the IP addresses and ports where it binds. Also "netstat -an" is useful for troubleshooting. On Jul 11, 2015 9:37 PM, "Joli Martinez" <mrjoli021@gmail.com> wrote:
Hello,
I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I see traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register?
I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS.
<list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list>
<!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
freeswitch@internal> sofia status Name Type Data State ================================================================================================= 192.168.1.250 alias internal ALIASED 192.168.21.250 alias internal ALIASED external profile sip:mod_sofia@99.58.100.184:5080 RUNNING (0) internal-ipv6 profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0) internal profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0) ================================================================================================= 3 profiles 2 aliases freeswitch@internal> 192.168.21.250 is the interface for FS. 192.168.1.250 is Lan2. LAN2 should not be connected to FS. How can I fix this? On Sat, Jul 11, 2015 at 3:52 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
What do you see in "sofia status" output? It should list the IP addresses and ports where it binds.
Also "netstat -an" is useful for troubleshooting. On Jul 11, 2015 9:37 PM, "Joli Martinez" <mrjoli021@gmail.com> wrote:
Hello,
I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I see traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register?
I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS.
<list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list>
<!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
by default we figure out the IPv4 address which would route to the Internet and we set that to a variable. you can override this, check out vars.xml, it should be documented in there On Saturday, July 11, 2015, Joli Martinez <mrjoli021@gmail.com> wrote:
freeswitch@internal> sofia status
Name Type Data State
=================================================================================================
192.168.1.250 alias internal ALIASED
192.168.21.250 alias internal ALIASED
external profile sip:mod_sofia@99.58.100.184:5080 RUNNING (0)
internal-ipv6 profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
internal profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
=================================================================================================
3 profiles 2 aliases
freeswitch@internal>
192.168.21.250 is the interface for FS. 192.168.1.250 is Lan2. LAN2 should not be connected to FS.
How can I fix this?
On Sat, Jul 11, 2015 at 3:52 PM, Stanislav Sinyagin <ssinyagin@gmail.com <javascript:_e(%7B%7D,'cvml','ssinyagin@gmail.com');>> wrote:
What do you see in "sofia status" output? It should list the IP addresses and ports where it binds.
Also "netstat -an" is useful for troubleshooting. On Jul 11, 2015 9:37 PM, "Joli Martinez" <mrjoli021@gmail.com <javascript:_e(%7B%7D,'cvml','mrjoli021@gmail.com');>> wrote:
Hello,
I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I see traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register?
I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS.
<list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list>
<!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <javascript:_e(%7B%7D,'cvml','consulting@freeswitch.org');> http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','FreeSWITCH-users@lists.freeswitch.org');> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I changed the vars.xml and the internal.xml restarted Freeswitch and still shows both IP's vars.xml <!-- <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/> --> <X-PRE-PROCESS cmd="set" data="bind_server_ip=192.168.21.250"/> On Sat, Jul 11, 2015 at 5:18 PM, Michael Jerris <mike@jerris.com> wrote:
by default we figure out the IPv4 address which would route to the Internet and we set that to a variable. you can override this, check out vars.xml, it should be documented in there
On Saturday, July 11, 2015, Joli Martinez <mrjoli021@gmail.com> wrote:
freeswitch@internal> sofia status
Name Type Data State
=================================================================================================
192.168.1.250 alias internal ALIASED
192.168.21.250 alias internal ALIASED
external profile sip:mod_sofia@99.58.100.184:5080 RUNNING (0)
internal-ipv6 profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
internal profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
=================================================================================================
3 profiles 2 aliases
freeswitch@internal>
192.168.21.250 is the interface for FS. 192.168.1.250 is Lan2. LAN2 should not be connected to FS.
How can I fix this?
On Sat, Jul 11, 2015 at 3:52 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
What do you see in "sofia status" output? It should list the IP addresses and ports where it binds.
Also "netstat -an" is useful for troubleshooting. On Jul 11, 2015 9:37 PM, "Joli Martinez" <mrjoli021@gmail.com> wrote:
Hello,
I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I see traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register?
I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS.
<list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list>
<!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
it's the wrong parameter, see the description above it in vars.xml. The right ones are external_rtp_ip and external_sip_ip On Sat, Jul 11, 2015 at 11:35 PM, Joli Martinez <mrjoli021@gmail.com> wrote:
I changed the vars.xml and the internal.xml restarted Freeswitch and still shows both IP's
vars.xml
<!-- <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/> -->
<X-PRE-PROCESS cmd="set" data="bind_server_ip=192.168.21.250"/>
On Sat, Jul 11, 2015 at 5:18 PM, Michael Jerris <mike@jerris.com> wrote:
by default we figure out the IPv4 address which would route to the Internet and we set that to a variable. you can override this, check out vars.xml, it should be documented in there
On Saturday, July 11, 2015, Joli Martinez <mrjoli021@gmail.com> wrote:
freeswitch@internal> sofia status
Name Type Data State
=================================================================================================
192.168.1.250 alias internal ALIASED
192.168.21.250 alias internal ALIASED
external profile sip:mod_sofia@99.58.100.184:5080 RUNNING (0)
internal-ipv6 profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
internal profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
=================================================================================================
3 profiles 2 aliases
freeswitch@internal>
192.168.21.250 is the interface for FS. 192.168.1.250 is Lan2. LAN2 should not be connected to FS.
How can I fix this?
On Sat, Jul 11, 2015 at 3:52 PM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
What do you see in "sofia status" output? It should list the IP addresses and ports where it binds.
Also "netstat -an" is useful for troubleshooting.
On Jul 11, 2015 9:37 PM, "Joli Martinez" <mrjoli021@gmail.com> wrote:
Hello,
I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I see traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register?
I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS.
<list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list>
<!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I want my external profile to pick up the public IP. which it is doing correctly, but my internal profile to use IP 192.168.21.250 on port 5060. I have changed the internal.xml to point to 192.168.21.250 and for some reason the 192.168.1.250 keeps showing up. Also I need the profile to be on 5060. I have also changed the the vars.xml to show 5060 and nothing. I have restarted Freeswitch after each change and verified that nothing else is running on 5060. The server does have two interfaces and the default gw is set to 192.168.21.50. The 192.168.1.250 is only for out of band management and will not need access to FS. Sofia status freeswitch@internal> sofia status Name Type Data State ================================================================================================= 192.168.1.250 alias internal ALIASED 192.168.21.250 alias internal ALIASED external profile sip:mod_sofia@1.1.1.1:5080 RUNNING (0) internal-ipv6 profile sip:mod_sofia@1.1.1.1:5040 RUNNING (0) internal profile sip:mod_sofia@1.1.1.1:5041 RUNNING (0) ================================================================================================= 3 profiles 2 aliases netstat -nat [root@Switch01 sip_profiles]# netstat -nat | grep 192.168.21.250 tcp 0 0 192.168.21.250:5080 0.0.0.0:* LISTEN internal.xml <!-- port to bind to for sip traffic --> <param name="sip-port" value="$${internal_sip_port}"/> <!-- <param name="sip-port" value="5060"/> --> <param name="dialplan" value="XML"/> <param name="dtmf-duration" value="2000"/> <param name="inbound-codec-prefs" value= "$${global_codec_prefs}"/> <param name="outbound-codec-prefs" value= "$${global_codec_prefs}"/> <param name="rtp-timer-name" value="soft"/> <!-- ip address to use for rtp, DO NOT USE HOSTNAMES ONLY IP ADDRESSES --> <!-- <param name="rtp-ip" value="$${local_ip_v4}"/> --> <param name="rtp-ip" value="192.168.21.250"/> <!-- ip address to bind to, DO NOT USE HOSTNAMES ONLY IP ADDRESSES --> <!-- <param name="sip-ip" value="$${local_ip_v4}"/> --> <param name="sip-ip" value="192.168.21.250"/> vars.xml <!-- Internal SIP Profile --> <X-PRE-PROCESS cmd="set" data="internal_auth_calls=true"/> <X-PRE-PROCESS cmd="set" data="internal_sip_port=5060"/> <X-PRE-PROCESS cmd="set" data="internal_tls_port=5061"/> <X-PRE-PROCESS cmd="set" data="internal_ssl_enable=false"/> <X-PRE-PROCESS cmd="set" data="internal_ssl_dir=$${base_dir}/conf/ssl"/> <!-- External SIP Profile --> <X-PRE-PROCESS cmd="set" data="external_auth_calls=false"/> <X-PRE-PROCESS cmd="set" data="external_sip_port=5080"/> <X-PRE-PROCESS cmd="set" data="external_tls_port=5081"/> <X-PRE-PROCESS cmd="set" data="external_ssl_enable=false"/> <X-PRE-PROCESS cmd="set" data="external_ssl_dir=$${base_dir}/conf/ssl"/> On Sun, Jul 12, 2015 at 1:50 AM, Stanislav Sinyagin <ssinyagin@gmail.com> wrote:
it's the wrong parameter, see the description above it in vars.xml. The right ones are external_rtp_ip and external_sip_ip
On Sat, Jul 11, 2015 at 11:35 PM, Joli Martinez <mrjoli021@gmail.com> wrote:
I changed the vars.xml and the internal.xml restarted Freeswitch and still shows both IP's
vars.xml
<!-- <X-PRE-PROCESS cmd="set" data="bind_server_ip=auto"/> -->
<X-PRE-PROCESS cmd="set" data="bind_server_ip=192.168.21.250"/>
On Sat, Jul 11, 2015 at 5:18 PM, Michael Jerris <mike@jerris.com> wrote:
by default we figure out the IPv4 address which would route to the Internet and we set that to a variable. you can override this, check
out
vars.xml, it should be documented in there
On Saturday, July 11, 2015, Joli Martinez <mrjoli021@gmail.com> wrote:
freeswitch@internal> sofia status
Name Type Data State
=================================================================================================
192.168.1.250 alias internal ALIASED
192.168.21.250 alias internal ALIASED
external profile sip:mod_sofia@99.58.100.184:5080 RUNNING (0)
internal-ipv6 profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
internal profile sip:mod_sofia@99.58.100.184:6693 RUNNING (0)
=================================================================================================
3 profiles 2 aliases
freeswitch@internal>
192.168.21.250 is the interface for FS. 192.168.1.250 is Lan2. LAN2 should not be connected to FS.
How can I fix this?
On Sat, Jul 11, 2015 at 3:52 PM, Stanislav Sinyagin <
ssinyagin@gmail.com>
wrote:
What do you see in "sofia status" output? It should list the IP addresses and ports where it binds.
Also "netstat -an" is useful for troubleshooting.
On Jul 11, 2015 9:37 PM, "Joli Martinez" <mrjoli021@gmail.com> wrote:
Hello,
I have installed Freeswitch and fusionPBX. My LAN network is 192.168.21.0/24. PBX is 250. I am trying to register a phone to Freeswitch. When I do tcpdump on the LAN interface on port 5060, I
see
traffic hitting the box from the phone, but on the Freeswitch CLI I see nothing. I am assuming an ACL is blocking the traffic. Where can I allow the LAN side to register?
I have tried the acl.xml and added the following and it still doesn't work. After I did this I reloaded the ACL and also restarted FS.
<list name="lan" default="allow"> <!-- <node type="deny" cidr="192.168.21.0/24"/> --> <node type="allow" cidr="192.168.21.0/24"/> </list>
<!-- This will traverse the directory adding all users with the cidr= tag to this ACL, when this ACL matches the users variables and params apply as if they digest authenticated. --> <list name="domains" default="deny"> <!-- domain= is special it scans the domain from the directory to build the ACL --> <node type="allow" domain="$${domain}"/> <node type="allow" cidr="192.168.21.1/32"/> <!-- use cidr= if you wish to allow ip ranges to this domains acl. --> <node type="allow" cidr="192.168.21.0/24"/>
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Joli Martinez
-
Michael Jerris
-
Stanislav Sinyagin