Re: [Freeswitch-users] How to receive incoming calls from Huawei dongle and mod_gsmopen?
Hello Gabriel, I guess at this point you have 1) Confirmed that the Modem does voice by testing it with some other PNX 2) Confirmed that you see activity in fs_cli when you make calls to the modem - this shows that the modem is well connected to the modem. On ubuntu this is easier to debug - usually it is making sure the modem lines listed under /dev/ttyUSB* correspond to the lines in gsmopen.conf.xml and have read access - even on windows, please make sure these match. it is possible that the modems are on different COM lines to the ones specified in gsmopen.conf.xml, in which case FS will not see your modem. Jude Mukundane On Mon, May 16, 2016 at 9:07 PM, Gabriel MdS <gabriel@cefet.net> wrote:
Hi Giovanni,
Thanks for your response.
As I reported in the original message, the module mod_gsmopen is installed and running (auto-loaded). I was able to call others from my softphone using my modem and mod_gsmopen without any problems. I just can't get FreeSWITCH to automatically answer the call and forward it to an IVR menu. It seems like it is not receiving the RING signal or I am missing some other setting...
My application is really simple. I have it running on asterix+chan_dongle on a virtual machine, but just recently found FS which runs on windows, which is better for me.
If you have any further advice I'd appreciate it!
Thanks!
-- Gabriel MdS
2016-05-16 16:48 GMT-03:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Gabriel, Sorry, now I understand your problem. Yes, it seems like you do not receive the RING. Maybe there is some setting missing, maybe for your specific dongle model? Try to see the exact sequence of all initialization AT commands when it works (eg, maybe wirh asterisk and chan_dongle), then the sequence when it does not work in mod_gsmopen, and.voilà :) -giovanni sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 17/Mag/2016 18:42, "Jude Mukundane" <jude19love@gmail.com> ha scritto:
Hello Gabriel,
I guess at this point you have 1) Confirmed that the Modem does voice by testing it with some other PNX 2) Confirmed that you see activity in fs_cli when you make calls to the modem - this shows that the modem is well connected to the modem.
On ubuntu this is easier to debug - usually it is making sure the modem lines listed under /dev/ttyUSB* correspond to the lines in gsmopen.conf.xml and have read access - even on windows, please make sure these match. it is possible that the modems are on different COM lines to the ones specified in gsmopen.conf.xml, in which case FS will not see your modem.
Jude Mukundane
On Mon, May 16, 2016 at 9:07 PM, Gabriel MdS <gabriel@cefet.net> wrote:
Hi Giovanni,
Thanks for your response.
As I reported in the original message, the module mod_gsmopen is installed and running (auto-loaded). I was able to call others from my softphone using my modem and mod_gsmopen without any problems. I just can't get FreeSWITCH to automatically answer the call and forward it to an IVR menu. It seems like it is not receiving the RING signal or I am missing some other setting...
My application is really simple. I have it running on asterix+chan_dongle on a virtual machine, but just recently found FS which runs on windows, which is better for me.
If you have any further advice I'd appreciate it!
Thanks!
-- Gabriel MdS
2016-05-16 16:48 GMT-03:00 Giovanni Maruzzelli <gmaruzz@gmail.com>:
Have you compiled and loaded the module?
Do you have any trace of its presence in freeswitch console?
Also, if you are not an expert I would definitely counseil you not to try uncharted things like gsmopen on won with fusionpbx. It's just too complex. Do it after you master both fusionpbx and FreeSWITCH.
My two cents :) -giovanni
sent from mobile cell: +39 347 266 56 18 Giovanni Maruzzelli OpenTelecom.IT Il 16/Mag/2016 21:10, "Gabriel MdS" <gabriel@cefet.net> ha scritto:
Hi,
I'm a newbie trying to setup FreeSWITCH with FusionPBX and mod_gsmopen. I'm using the 32bit version in Windows 7, compiled from current source (version 1.7) in Visual Studio 2015 Community.
My Huawei dongle is E1756, unlocked and with voice calls enabled.
Currently I am able to call my IVR menu directly by dialing from my softphone and I am also able to originate outbound calls after adding a rule using FusionPbx Dialplan Manager.
However if I try to call the dongle it keeps ringing, not being answered and no log is displayed in console. My gsmopen.conf.xml file has the following lines:
<param name="context" value="public"/> <param name="destination" value="incoming_gsm_call"/>
And I've set a new dialplan in fusionpbx rule with:
condition > context > public condition > destination_number > incoming_gsm_call action > transfer > 500 XML default (500 being the main IVR menu extension)
Am I missing something to get this working or maybe there is some setting wrong with my dongle?
Thanks!
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
Giovanni Maruzzelli
-
Jude Mukundane