Where can I get the 3rd party call firmware Andrew Colin Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: map | website | company blog | linkedin -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Shaun Stokes Sent: Monday, October 2, 2017 9:10 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Cisco 8845 Just to add, the 8841 was on the 3rd Party Call Control firmware (11-0-1MPP). We previously had problems such as phones registering to the wrong server port and 3 way conference not working using the enterprise firmware on the 7821 (11-7-1), these problems did not occur on the 3rd Party Call Control firmware (11-0-1MPP). ________________________________________ From: Shaun Stokes Sent: 02 October 2017 07:58 To: FreeSWITCH Users Help Subject: RE: Cisco 8845 Not sure about the 8845, but the 8841 tested and working on FreeSWITCH 1.6 using TCP and TLS. ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 28 September 2017 15:24 To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Cisco 8845 Hi Guys Has anyone got a cisco 8845 IP phone working on freeswitch? ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

I have checked there but don’t see a ccp version for the 8845 As far as I can see the phone is using enterprise firmware at the moment Any ideas :( Andrew Colin Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: map | website | company blog | linkedin -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Shaun Stokes Sent: Monday, October 2, 2017 1:39 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Cisco 8845 The phone will need to be pre-loaded with the 3PCC firmware by Cisco, if you buy a phone which is pre-loaded with enterprise firmware you can't upgrade to 3PCC, also if you upgrade a 3PCC phone to enterprise you can't switch back it will be stuck on enterprise. The enterprise firmware is designed for CUCM (Cisco proprietary) however is 'supposed' to be backwards compatible with other SIP platforms. If you're already using the enterprise firmware I can see they've recently released version 12 which we haven't tested, perhaps this has better backwards compatibility with other SIP platforms but can't confirm. The 3PCC (MPP) firmware might not be available for all models. You'll need a Cisco account to login but it's free to setup and they don't charge for the firmware: https://software.cisco.com/download/navigator.html ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 02 October 2017 10:26 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Cisco 8845 Where can I get the 3rd party call firmware Andrew Colin Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: map | website | company blog | linkedin -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Shaun Stokes Sent: Monday, October 2, 2017 9:10 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Cisco 8845 Just to add, the 8841 was on the 3rd Party Call Control firmware (11-0-1MPP). We previously had problems such as phones registering to the wrong server port and 3 way conference not working using the enterprise firmware on the 7821 (11-7-1), these problems did not occur on the 3rd Party Call Control firmware (11-0-1MPP). ________________________________________ From: Shaun Stokes Sent: 02 October 2017 07:58 To: FreeSWITCH Users Help Subject: RE: Cisco 8845 Not sure about the 8845, but the 8841 tested and working on FreeSWITCH 1.6 using TCP and TLS. ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 28 September 2017 15:24 To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Cisco 8845 Hi Guys Has anyone got a cisco 8845 IP phone working on freeswitch? ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

The configuration for 3PCC uses a similar format to the old Cisco SPAs, seems to work well via HTTPS using a provisioning profile rule. You can download the configuration file from the phone using http://phoneip/admin/cfg.xml The enterprise firmware is very different, we've only tested it via TFTP thus far. The configuration for enterprise is typically produced from the CUCM (Cisco provisioning server). Here's an example config, you'll want to go through each of the parameters and update with the correct settings: <device> <deviceProtocol>SIP</deviceProtocol> <sshUserId>admin</sshUserId> <sshPassword>passwordhere</sshPassword> <devicePool> <dateTimeSetting> <dateTemplate>D/M/YA</dateTemplate> <timeZone>GMT Standard/Daylight Time</timeZone> <ntps> <ntp> <name>ntpiphere</name> <ntpMode>Unicast</ntpMode> </ntp> </ntps> </dateTimeSetting> <callManagerGroup> <members> <member priority="0"> <callManager> <ports> <ethernetPhonePort>2000</ethernetPhonePort> <sipPort>5060</sipPort> <securedSipPort>5061</securedSipPort> </ports> <processNodeName>sipserverhere</processNodeName> </callManager> </member> </members> </callManagerGroup> </devicePool> <sipProfile> <sipProxies> <backupProxy></backupProxy> <backupProxyPort>5060</backupProxyPort> <emergencyProxy></emergencyProxy> <emergencyProxyPort></emergencyProxyPort> <outboundProxy>sipserverhere</outboundProxy> <outboundProxyPort>5060</outboundProxyPort> <registerWithProxy>true</registerWithProxy> </sipProxies> <sipCallFeatures> <cnfJoinEnabled>true</cnfJoinEnabled> <callForwardURI>x-serviceuri-cfwdall</callForwardURI> <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI> <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI> <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI> <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI> <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI> <rfc2543Hold>false</rfc2543Hold> <callHoldRingback>2</callHoldRingback> <localCfwdEnable>true</localCfwdEnable> <semiAttendedTransfer>true</semiAttendedTransfer> <anonymousCallBlock>2</anonymousCallBlock> <callerIdBlocking>2</callerIdBlocking> <dndControl>0</dndControl> <remoteCcEnable>true</remoteCcEnable> </sipCallFeatures> <sipStack> <sipInviteRetx>6</sipInviteRetx> <sipRetx>10</sipRetx> <timerInviteExpires>180</timerInviteExpires> <timerRegisterExpires>3600</timerRegisterExpires> <timerRegisterDelta>5</timerRegisterDelta> <timerKeepAliveExpires>120</timerKeepAliveExpires> <timerSubscribeExpires>120</timerSubscribeExpires> <timerSubscribeDelta>5</timerSubscribeDelta> <timerT1>500</timerT1> <timerT2>4000</timerT2> <maxRedirects>70</maxRedirects> <remotePartyID>false</remotePartyID> <userInfo>None</userInfo> </sipStack> <autoAnswerTimer>1</autoAnswerTimer> <autoAnswerAltBehavior>false</autoAnswerAltBehavior> <autoAnswerOverride>true</autoAnswerOverride> <transferOnhookEnabled>false</transferOnhookEnabled> <enableVad>false</enableVad> <dtmfAvtPayload>101</dtmfAvtPayload> <dtmfDbLevel>3</dtmfDbLevel> <dtmfOutofBand>avt</dtmfOutofBand> <alwaysUsePrimeLine>false</alwaysUsePrimeLine> <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail> <kpml>3</kpml> <phoneLabel>labelhere</phoneLabel> <stutterMsgWaiting>1</stutterMsgWaiting> <callStats>false</callStats> <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts> <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig> <sipLines> <line button="1"> <featureID>9</featureID> <featureLabel>labelhere</featureLabel> <proxy>sipserverhere:5060</proxy> <port>5060</port> <name>namehere</name> <displayName>displaynamehere</displayName> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>sipexthere</authName> <authPassword>sipextpasswordhere</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>1</messageWaitingLampPolicy> <messagesNumber>voicemailaccessnumberhere</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <contact>sipexthere</contact> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>false</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> <line button="2"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="3"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="4"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="5"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="6"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> </sipLines> <voipControlPort>5060</voipControlPort> <startMediaPort>16348</startMediaPort> <stopMediaPort>20134</stopMediaPort> <dscpForAudio>184</dscpForAudio> <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> <dialTemplate>dialplan.xml</dialTemplate> <softKeyFile></softKeyFile> </sipProfile> <commonProfile> <phonePassword></phonePassword> <backgroundImageAccess>true</backgroundImageAccess> <callLogBlfEnabled>2</callLogBlfEnabled> </commonProfile> <loadInformation>sip78xx.11-5-1-18</loadInformation> <vendorConfig> <disableSpeaker>false</disableSpeaker> <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset> <pcPort>0</pcPort> <settingsAccess>1</settingsAccess> <garp>0</garp> <voiceVlanAccess>0</voiceVlanAccess> <videoCapability>0</videoCapability> <autoSelectLineEnable>1</autoSelectLineEnable> <webAccess>1</webAccess> <daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive> <displayOnTime>00:00</displayOnTime> <displayOnDuration>00:00</displayOnDuration> <displayIdleTimeout>00:00</displayIdleTimeout> <spanToPCPort>1</spanToPCPort> <loggingDisplay>1</loggingDisplay> <loadServer></loadServer> </vendorConfig> <userLocale> <name></name> <uid></uid> <langCode>en_US</langCode> <version>1.0.0.0-1</version> <winCharSet>iso-8859-1</winCharSet> </userLocale> <networkLocale></networkLocale> <networkLocaleInfo> <name></name> <uid></uid> <version>1.0.0.0-1</version> </networkLocaleInfo> <deviceSecurityMode>1</deviceSecurityMode> <authenticationURL></authenticationURL> <directoryURL>http://example.domain.ext/contacts.xml</directoryURL> <servicesURL>http://example.domain.ext/services/menu.xml</servicesURL> <idleURL></idleURL> <informationURL></informationURL> <messagesURL></messagesURL> <proxyServerURL></proxyServerURL> <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig> <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices> <dscpForCm2Dvce>96</dscpForCm2Dvce> <transportLayerProtocol>2</transportLayerProtocol> <capfAuthMode>0</capfAuthMode> <capfList> <capf> <phonePort>3804</phonePort> </capf> </capfList> <certHash></certHash> <encrConfig>false</encrConfig> <natEnabled>true</natEnabled> <natAddress>yourwantiphere</natAddress> <natReceivedProcessing>false</natReceivedProcessing> </device> ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 02 October 2017 12:31 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Cisco 8845 Also any chance you can share your config file with me as I cant seem to even get the phone to try register? Andrew Colin Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: map | website | company blog | linkedin -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Shaun Stokes Sent: Monday, October 2, 2017 9:10 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Cisco 8845 Just to add, the 8841 was on the 3rd Party Call Control firmware (11-0-1MPP). We previously had problems such as phones registering to the wrong server port and 3 way conference not working using the enterprise firmware on the 7821 (11-7-1), these problems did not occur on the 3rd Party Call Control firmware (11-0-1MPP). ________________________________________ From: Shaun Stokes Sent: 02 October 2017 07:58 To: FreeSWITCH Users Help Subject: RE: Cisco 8845 Not sure about the 8845, but the 8841 tested and working on FreeSWITCH 1.6 using TCP and TLS. ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 28 September 2017 15:24 To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Cisco 8845 Hi Guys Has anyone got a cisco 8845 IP phone working on freeswitch? ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________

Our experience of the enterprise firmware on version 11 isn't great, while the phones work there were certain features such as 3 way conference and changing the SIP registrar port which didn't work. We also found an odd issue with audio dropping out on certain calls (mostly international), seems like VAD is active despite disabling this in the config. These were not issues using the 3PCC firmware, version 12 of the enterprise firmware might provide better compatibility but can't confirm. ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 03 October 2017 15:13 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Cisco 8845 Still cant seem to find the 3PCC firmware for this unit Will other versions work? Andrew Colin Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: map | website | company blog | linkedin -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Shaun Stokes Sent: Tuesday, October 3, 2017 1:09 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Cisco 8845 The configuration for 3PCC uses a similar format to the old Cisco SPAs, seems to work well via HTTPS using a provisioning profile rule. You can download the configuration file from the phone using http://phoneip/admin/cfg.xml The enterprise firmware is very different, we've only tested it via TFTP thus far. The configuration for enterprise is typically produced from the CUCM (Cisco provisioning server). Here's an example config, you'll want to go through each of the parameters and update with the correct settings: <device> <deviceProtocol>SIP</deviceProtocol> <sshUserId>admin</sshUserId> <sshPassword>passwordhere</sshPassword> <devicePool> <dateTimeSetting> <dateTemplate>D/M/YA</dateTemplate> <timeZone>GMT Standard/Daylight Time</timeZone> <ntps> <ntp> <name>ntpiphere</name> <ntpMode>Unicast</ntpMode> </ntp> </ntps> </dateTimeSetting> <callManagerGroup> <members> <member priority="0"> <callManager> <ports> <ethernetPhonePort>2000</ethernetPhonePort> <sipPort>5060</sipPort> <securedSipPort>5061</securedSipPort> </ports> <processNodeName>sipserverhere</processNodeName> </callManager> </member> </members> </callManagerGroup> </devicePool> <sipProfile> <sipProxies> <backupProxy></backupProxy> <backupProxyPort>5060</backupProxyPort> <emergencyProxy></emergencyProxy> <emergencyProxyPort></emergencyProxyPort> <outboundProxy>sipserverhere</outboundProxy> <outboundProxyPort>5060</outboundProxyPort> <registerWithProxy>true</registerWithProxy> </sipProxies> <sipCallFeatures> <cnfJoinEnabled>true</cnfJoinEnabled> <callForwardURI>x-serviceuri-cfwdall</callForwardURI> <callPickupURI>x-cisco-serviceuri-pickup</callPickupURI> <callPickupListURI>x-cisco-serviceuri-opickup</callPickupListURI> <callPickupGroupURI>x-cisco-serviceuri-gpickup</callPickupGroupURI> <meetMeServiceURI>x-cisco-serviceuri-meetme</meetMeServiceURI> <abbreviatedDialURI>x-cisco-serviceuri-abbrdial</abbreviatedDialURI> <rfc2543Hold>false</rfc2543Hold> <callHoldRingback>2</callHoldRingback> <localCfwdEnable>true</localCfwdEnable> <semiAttendedTransfer>true</semiAttendedTransfer> <anonymousCallBlock>2</anonymousCallBlock> <callerIdBlocking>2</callerIdBlocking> <dndControl>0</dndControl> <remoteCcEnable>true</remoteCcEnable> </sipCallFeatures> <sipStack> <sipInviteRetx>6</sipInviteRetx> <sipRetx>10</sipRetx> <timerInviteExpires>180</timerInviteExpires> <timerRegisterExpires>3600</timerRegisterExpires> <timerRegisterDelta>5</timerRegisterDelta> <timerKeepAliveExpires>120</timerKeepAliveExpires> <timerSubscribeExpires>120</timerSubscribeExpires> <timerSubscribeDelta>5</timerSubscribeDelta> <timerT1>500</timerT1> <timerT2>4000</timerT2> <maxRedirects>70</maxRedirects> <remotePartyID>false</remotePartyID> <userInfo>None</userInfo> </sipStack> <autoAnswerTimer>1</autoAnswerTimer> <autoAnswerAltBehavior>false</autoAnswerAltBehavior> <autoAnswerOverride>true</autoAnswerOverride> <transferOnhookEnabled>false</transferOnhookEnabled> <enableVad>false</enableVad> <dtmfAvtPayload>101</dtmfAvtPayload> <dtmfDbLevel>3</dtmfDbLevel> <dtmfOutofBand>avt</dtmfOutofBand> <alwaysUsePrimeLine>false</alwaysUsePrimeLine> <alwaysUsePrimeLineVoiceMail>false</alwaysUsePrimeLineVoiceMail> <kpml>3</kpml> <phoneLabel>labelhere</phoneLabel> <stutterMsgWaiting>1</stutterMsgWaiting> <callStats>false</callStats> <silentPeriodBetweenCallWaitingBursts>10</silentPeriodBetweenCallWaitingBursts> <disableLocalSpeedDialConfig>false</disableLocalSpeedDialConfig> <sipLines> <line button="1"> <featureID>9</featureID> <featureLabel>labelhere</featureLabel> <proxy>sipserverhere:5060</proxy> <port>5060</port> <name>namehere</name> <displayName>displaynamehere</displayName> <autoAnswer> <autoAnswerEnabled>2</autoAnswerEnabled> </autoAnswer> <callWaiting>3</callWaiting> <authName>sipexthere</authName> <authPassword>sipextpasswordhere</authPassword> <sharedLine>false</sharedLine> <messageWaitingLampPolicy>1</messageWaitingLampPolicy> <messagesNumber>voicemailaccessnumberhere</messagesNumber> <ringSettingIdle>4</ringSettingIdle> <ringSettingActive>5</ringSettingActive> <contact>sipexthere</contact> <forwardCallInfoDisplay> <callerName>true</callerName> <callerNumber>false</callerNumber> <redirectedNumber>false</redirectedNumber> <dialedNumber>true</dialedNumber> </forwardCallInfoDisplay> </line> <line button="2"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="3"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="4"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="5"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> <line button="6"> <featureID>20</featureID> <featureLabel>Menu</featureLabel> <serviceURI>http://example.domain.ext/services/menu.xml</serviceURI> </line> </sipLines> <voipControlPort>5060</voipControlPort> <startMediaPort>16348</startMediaPort> <stopMediaPort>20134</stopMediaPort> <dscpForAudio>184</dscpForAudio> <ringSettingBusyStationPolicy>0</ringSettingBusyStationPolicy> <dialTemplate>dialplan.xml</dialTemplate> <softKeyFile></softKeyFile> </sipProfile> <commonProfile> <phonePassword></phonePassword> <backgroundImageAccess>true</backgroundImageAccess> <callLogBlfEnabled>2</callLogBlfEnabled> </commonProfile> <loadInformation>sip78xx.11-5-1-18</loadInformation> <vendorConfig> <disableSpeaker>false</disableSpeaker> <disableSpeakerAndHeadset>false</disableSpeakerAndHeadset> <pcPort>0</pcPort> <settingsAccess>1</settingsAccess> <garp>0</garp> <voiceVlanAccess>0</voiceVlanAccess> <videoCapability>0</videoCapability> <autoSelectLineEnable>1</autoSelectLineEnable> <webAccess>1</webAccess> <daysDisplayNotActive>1,2,3,4,5,6,7</daysDisplayNotActive> <displayOnTime>00:00</displayOnTime> <displayOnDuration>00:00</displayOnDuration> <displayIdleTimeout>00:00</displayIdleTimeout> <spanToPCPort>1</spanToPCPort> <loggingDisplay>1</loggingDisplay> <loadServer></loadServer> </vendorConfig> <userLocale> <name></name> <uid></uid> <langCode>en_US</langCode> <version>1.0.0.0-1</version> <winCharSet>iso-8859-1</winCharSet> </userLocale> <networkLocale></networkLocale> <networkLocaleInfo> <name></name> <uid></uid> <version>1.0.0.0-1</version> </networkLocaleInfo> <deviceSecurityMode>1</deviceSecurityMode> <authenticationURL></authenticationURL> <directoryURL>http://example.domain.ext/contacts.xml</directoryURL> <servicesURL>http://example.domain.ext/services/menu.xml</servicesURL> <idleURL></idleURL> <informationURL></informationURL> <messagesURL></messagesURL> <proxyServerURL></proxyServerURL> <dscpForSCCPPhoneConfig>96</dscpForSCCPPhoneConfig> <dscpForSCCPPhoneServices>0</dscpForSCCPPhoneServices> <dscpForCm2Dvce>96</dscpForCm2Dvce> <transportLayerProtocol>2</transportLayerProtocol> <capfAuthMode>0</capfAuthMode> <capfList> <capf> <phonePort>3804</phonePort> </capf> </capfList> <certHash></certHash> <encrConfig>false</encrConfig> <natEnabled>true</natEnabled> <natAddress>yourwantiphere</natAddress> <natReceivedProcessing>false</natReceivedProcessing> </device> ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 02 October 2017 12:31 To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Cisco 8845 Also any chance you can share your config file with me as I cant seem to even get the phone to try register? Andrew Colin Converged Group | Licensed ISP 0258/IECNS/JAN/09 75 Witkoppen Rd, North Riding, Gauteng, 2162 Office: +27 10 591 4600 | Mobile: map | website | company blog | linkedin -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Shaun Stokes Sent: Monday, October 2, 2017 9:10 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Cisco 8845 Just to add, the 8841 was on the 3rd Party Call Control firmware (11-0-1MPP). We previously had problems such as phones registering to the wrong server port and 3 way conference not working using the enterprise firmware on the 7821 (11-7-1), these problems did not occur on the 3rd Party Call Control firmware (11-0-1MPP). ________________________________________ From: Shaun Stokes Sent: 02 October 2017 07:58 To: FreeSWITCH Users Help Subject: RE: Cisco 8845 Not sure about the 8845, but the 8841 tested and working on FreeSWITCH 1.6 using TCP and TLS. ________________________________________ From: FreeSWITCH-users [freeswitch-users-bounces@lists.freeswitch.org] on behalf of Andrew Colin [andrew@convergedgroup.net] Sent: 28 September 2017 15:24 To: FreeSWITCH-users@lists.freeswitch.org Subject: [Freeswitch-users] Cisco 8845 Hi Guys Has anyone got a cisco 8845 IP phone working on freeswitch? ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________ ______________________________________________________________________ This message has been checked for all known viruses by MessageLabs Virus Scanning Service. ______________________________________________________________________