FreeTDM and internal extensions and caller_id (user directory?)
Hello all, I have a small set of internal extensions working. I have an 8 port DAHDI card. 6 FXS, 2 FXO. I have it so I can call between FXS ports (extensions 1001-1005 right now are configured). This works fine. The problem is that the caller ID information is wrong (the default is FreeSwitch/0000000000). I need to be able to set this on a per port basis. I see that conf/directory is the place to set this up for sip. How/where do I do this for FreeTDM? I have not been able to find any documentation for this. I am afraid I have spent a few hours looking. If there is anything out there, I must be using the wrong search terms. Thanks for any help, Trever
What worked for me is in the [span zt <name>] you can set number => <caller id number> and name => <caller id name> . Perhaps an ata would be better -- I have found freetdm to not be the most stable of modules I have seen. Trever L. Adams <trever.adams@gmail.com> wrote:
Hello all,
I have a small set of internal extensions working. I have an 8 port DAHDI card. 6 FXS, 2 FXO. I have it so I can call between FXS ports (extensions 1001-1005 right now are configured).
This works fine. The problem is that the caller ID information is wrong (the default is FreeSwitch/0000000000). I need to be able to set this on a per port basis. I see that conf/directory is the place to set this up for sip. How/where do I do this for FreeTDM? I have not been able to find any documentation for this. I am afraid I have spent a few hours looking. If there is anything out there, I must be using the wrong search terms.
Thanks for any help, Trever
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com
On 10/27/2011 10:20 PM, covici@ccs.covici.com wrote:
What worked for me is in the [span zt <name>] you can set number => <caller id number> and name => <caller id name> .
Perhaps an ata would be better -- I have found freetdm to not be the most stable of modules I have seen. I am afraid that number and name are not complete. Was it caller_id_number and caller_id_name? Thank you, Trever
-- "Well-taught doctrines and principles have a more powerful influence on behavior than rules. " -- Elder Dallin H. Oaks - Ensign, Nov. 1999, 79
participants (2)
-
covici＠ccs.covici.com
-
Trever L. Adams