What is the good hardware configuration that needs freeswitch to support more then 30 calls? We have now 1.6 GHz in the CPU and 2 GB in the mem but is not enough.
If you search, you'll probably find that this question has been asked several times - each time, the general response will be: It depends on what you're trying to accomplish. http://wiki.freeswitch.org/wiki/Specsheet#Minimum.2FRecommended_System_Requi... http://wiki.freeswitch.org/wiki/Performance_testing_and_configurations#Recom... There is no "real" answer, but if you supply more information as to what your FreeSWITCH installation will be doing, you might get a helpful response from one of the experts. On Thu, May 10, 2012 at 12:43 PM, <tarik.bts.gi@gmail.com> wrote:
What is the good hardware configuration that needs freeswitch to support more then 30 calls? We have now 1.6 GHz in the CPU and 2 GB in the mem but is not enough.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Thu, May 10, 2012 at 12:43 PM, <tarik.bts.gi@gmail.com> wrote:
What is the good hardware configuration that needs freeswitch to support more then 30 calls? We have now 1.6 GHz in the CPU and 2 GB in the mem but is not enough.
What kind of processor? What operating system? Do you want 30 simultaneous calls or 30 new calls per second? Will you be doing transcoding on these calls? All those details will help you decide what to do next. -MC
If you want 30 concurrent calls, that setup *should* handle it just fine. As the others have said, your mileage may vary so, don't take my judgement as is. You'd probably want to do more research in this aspect. Besides, a 1.6GHz Intel Atom is going to be slightly slower than a 1.6GHz Sandy Bridge Celeron processor, so simply having a CPU clock cycle figure is meaningless unless you know how well your processor performs in your desired application. On Thu, May 10, 2012 at 3:18 PM, Michael Collins <msc@freeswitch.org> wrote:
On Thu, May 10, 2012 at 12:43 PM, <tarik.bts.gi@gmail.com> wrote:
What is the good hardware configuration that needs freeswitch to support more then 30 calls? We have now 1.6 GHz in the CPU and 2 GB in the mem but is not enough.
What kind of processor? What operating system? Do you want 30 simultaneous calls or 30 new calls per second? Will you be doing transcoding on these calls?
All those details will help you decide what to do next.
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Agreed with other's assessment of the situation, you're leaving out too many details such as intended usage, OS, chipsets, etc. I can tell you that i have ran FS on an extremely old laptop (1.0 GHZ Single-Core AMD w/512MB RAM) and got 40 calls doing no transcoding. I could only do a couple of calls with transcoding, then it would just crap out. That was on Debian Sid. So, there's a baseline. Sadly, I don't remember any other details on the machine than those that I've listed. On the other hand, I've gotten 6000 concurrent calls up at 150-200 CPS, then the database crapped out. That one was tuned extensively, and was also running on an 8 core machine at 1.8 Ghz and about 4GB RAM. There are a few others in this community who have done much better than that (probably with better equipment). YMMV on all of this. There are so many factors involved that it's hard to paint a picture unless you can be as detailed as humanly possible, and even then sometimes that's not enough. -BDF On Thu, May 10, 2012 at 7:53 PM, curriegrad2004 <curriegrad2004@gmail.com>wrote:
If you want 30 concurrent calls, that setup *should* handle it just fine. As the others have said, your mileage may vary so, don't take my judgement as is. You'd probably want to do more research in this aspect.
Besides, a 1.6GHz Intel Atom is going to be slightly slower than a 1.6GHz Sandy Bridge Celeron processor, so simply having a CPU clock cycle figure is meaningless unless you know how well your processor performs in your desired application.
On Thu, May 10, 2012 at 3:18 PM, Michael Collins <msc@freeswitch.org> wrote:
On Thu, May 10, 2012 at 12:43 PM, <tarik.bts.gi@gmail.com> wrote:
What is the good hardware configuration that needs freeswitch to support more then 30 calls? We have now 1.6 GHz in the CPU and 2 GB in the mem but is not enough.
What kind of processor? What operating system? Do you want 30
simultaneous
calls or 30 new calls per second? Will you be doing transcoding on these calls?
All those details will help you decide what to do next.
-MC
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Brian D. Foster Endigo Computer LLC Email: bdfoster@endigotech.com Phone: 317-800-7876 Indianapolis, Indiana, USA This message contains confidential information and is intended for those listed in the "To:", "CC:", and/or "BCC:" fields of the message header. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
ok, I tried to collect the maximum information that I can: OS version: CentOS release 5.4 the cpu info is: http://pastebin.freeswitch.org/19039 the mem info is: http://pastebin.freeswitch.org/19040 the out put of the command top is http://pastebin.freeswitch.org/19038 the number of calls when I made the test was: 5 total. the out put of gcore and gdb: http://pastebin.freeswitch.org/19041 I want also to notice that I get all the time some warning messages like 2012-05-11 14:36:10.716722 [WARNING] sofia_reg.c:1442 SIP auth challenge (REGISTER) on sofia profile 'internal' for [7351@domain] from ip @ip and we have 5 sofia profiles and 1 alias please give me your help as soon as possible On 05/11/2012 12:09 AM, Brian Foster wrote:
Agreed with other's assessment of the situation, you're leaving out too many details such as intended usage, OS, chipsets, etc. I can tell you that i have ran FS on an extremely old laptop (1.0 GHZ Single-Core AMD w/512MB RAM) and got 40 calls doing no transcoding. I could only do a couple of calls with transcoding, then it would just crap out. That was on Debian Sid.
So, there's a baseline. Sadly, I don't remember any other details on the machine than those that I've listed.
On the other hand, I've gotten 6000 concurrent calls up at 150-200 CPS, then the database crapped out. That one was tuned extensively, and was also running on an 8 core machine at 1.8 Ghz and about 4GB RAM. There are a few others in this community who have done much better than that (probably with better equipment).
YMMV on all of this. There are so many factors involved that it's hard to paint a picture unless you can be as detailed as humanly possible, and even then sometimes that's not enough.
-BDF
On Thu, May 10, 2012 at 7:53 PM, curriegrad2004 <curriegrad2004@gmail.com <mailto:curriegrad2004@gmail.com>> wrote:
If you want 30 concurrent calls, that setup *should* handle it just fine. As the others have said, your mileage may vary so, don't take my judgement as is. You'd probably want to do more research in this aspect.
Besides, a 1.6GHz Intel Atom is going to be slightly slower than a 1.6GHz Sandy Bridge Celeron processor, so simply having a CPU clock cycle figure is meaningless unless you know how well your processor performs in your desired application.
On Thu, May 10, 2012 at 3:18 PM, Michael Collins <msc@freeswitch.org <mailto:msc@freeswitch.org>> wrote: > > > On Thu, May 10, 2012 at 12:43 PM, <tarik.bts.gi@gmail.com <mailto:tarik.bts.gi@gmail.com>> wrote: >> >> What is the good hardware configuration >> that needs freeswitch to support more then 30 calls? We have now 1.6 GHz >> in the CPU and 2 GB in the mem but is not enough. > > What kind of processor? What operating system? Do you want 30 simultaneous > calls or 30 new calls per second? Will you be doing transcoding on these > calls? > > All those details will help you decide what to do next. > > -MC > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org <mailto:consulting@freeswitch.org> > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Brian D. Foster Endigo Computer LLC Email: bdfoster@endigotech.com <mailto:bdfoster@endigotech.com> Phone: 317-800-7876 Indianapolis, Indiana, USA
This message contains confidential information and is intended for those listed in the "To:", "CC:", and/or "BCC:" fields of the message header. If you are not the intended recipient you are notified that disclosing, copying, distributing or taking any action in reliance on the contents of this information is strictly prohibited. E-mail transmission cannot be guaranteed to be secure or error-free as information could be intercepted, corrupted, lost, destroyed, arrive late or incomplete, or contain viruses. The sender therefore does not accept liability for any errors or omissions in the contents of this message, which arise as a result of e-mail transmission. If verification is required please request a hard-copy version.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Brian Foster
-
curriegrad2004
-
ghallab
-
James
-
Michael Collins
-
tarik.bts.gi＠gmail.com