BRI-ISDN-Card Alternatives to Sangoma A500 - Do you have a working EuroISDN-Setup with a different card? Please comment!
Hello! I'm having a hard time finding a working ISDN-Card for FreeSWITCH. I've succesfully tested the Sangoma A500 and it would be a great card - but the card is just a litte bit too long for the mini-ITX-Hardware we want to use. Therefore i'm desperately looking for alternatives: - I've tested an OpenVox B100P, without success so far(See http://lists.freeswitch.org/pipermail/freeswitch-users/2011-April/071872.htm...) - Today i've installed an Eicon Diva BRI-2 card but so far i was not able to get a working setup, right now i have no clue how to continue marrying FreeTDM with the official CAPI-drivers So if anyone has a working setup with EuroISDN in PTP- and TE-mode and a card other than Sangoma A500, please let me know! Or if you know there's nothing working BUT Sangoma A500, i'm happy too(Then i have a final answer at least). In case anyone knows how to get a Eicon/Dialogic Diva BRI-2 card to work with FreeTDM i'd also be very thankful for a comment. I've installed the drivers provided by Dialogic(Diva4Linux 9.50111-98) and in an blind attempt tried to configure FreeSWITCH with libpri, so far the card has not been recognized. Unfortunately i have a limited knowledge about ISDN beyond vanilla installation of drivers and getting the drivers/devices/modules to show up in Linux(i.e. i don't really know what's going on between ftdm and the diverse ISDN-drivers). Best regards Christian
Have you tried this: http://www.khomp.com.br/?menu=produto&content=produtos&type=SPX&base=42 They officially support FreeSWITCH and they come from the Dialogic-like world where all the protocols are run on the card itself so you don't need libpri or similar. Same thing applies to CAS R1/R2, EL7, E1LC and QSIG as the spec sheet tells us. I use this card on a daily basis as well as 80% of the Brazilian market, so I guess it must work, right? ;-) Contact me off list if you're interested. Regards, João Mesquita On Tue, May 10, 2011 at 1:56 PM, Christian Benke <benkokakao@gmail.com>wrote:
Hello!
I'm having a hard time finding a working ISDN-Card for FreeSWITCH. I've succesfully tested the Sangoma A500 and it would be a great card - but the card is just a litte bit too long for the mini-ITX-Hardware we want to use. Therefore i'm desperately looking for alternatives:
- I've tested an OpenVox B100P, without success so far(See
http://lists.freeswitch.org/pipermail/freeswitch-users/2011-April/071872.htm... ) - Today i've installed an Eicon Diva BRI-2 card but so far i was not able to get a working setup, right now i have no clue how to continue marrying FreeTDM with the official CAPI-drivers
So if anyone has a working setup with EuroISDN in PTP- and TE-mode and a card other than Sangoma A500, please let me know! Or if you know there's nothing working BUT Sangoma A500, i'm happy too(Then i have a final answer at least).
In case anyone knows how to get a Eicon/Dialogic Diva BRI-2 card to work with FreeTDM i'd also be very thankful for a comment. I've installed the drivers provided by Dialogic(Diva4Linux 9.50111-98) and in an blind attempt tried to configure FreeSWITCH with libpri, so far the card has not been recognized. Unfortunately i have a limited knowledge about ISDN beyond vanilla installation of drivers and getting the drivers/devices/modules to show up in Linux(i.e. i don't really know what's going on between ftdm and the diverse ISDN-drivers).
Best regards Christian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Am Tuesday 10 May 2011 schrieb Christian Benke:
- I've tested an OpenVox B100P, without success so far(See http://lists.freeswitch.org/pipermail/freeswitch-users/2011-April/071872.htm...)
That was a configuration problem (missing "node"/"mode" parameter), mixed with missing parameter validation in libpri and not setting sane defaults in ftmod_libpri (which is now fixed in git: http://oss.axsentis.de/gitweb/?p=freeswitch.git;a=commitdiff;h=2ac7a9de4f69 ).
- Today i've installed an Eicon Diva BRI-2 card but so far i was not able to get a working setup, right now i have no clue how to continue marrying FreeTDM with the official CAPI-drivers
Not possible, FreeTDM has no support for CAPI. stkn -- ------------------------------------------------------------------------------- Stefan Knoblich | Web: http://www.axsentis.de/ axsentis GmbH | http://oss.axsentis.de/ Eupener Str. 74, 50933 Koeln, Germany | Amtsgericht Koeln: HR B 56238 | Email: s.knoblich@axsentis.de UST-ID: DE244977565 | JID: s.knoblich@jabber.axsentis.de ------------------------------------------------------------------------------- Web: http://stkn.techmage.de/ Email: stkn@freeswitch.org IRC: #freeswitch-de @ irc.freenode.net
On 10 May 2011 20:07, Stefan Knoblich <stkn@freeswitch.org> wrote:
Am Tuesday 10 May 2011 schrieb Christian Benke:
- I've tested an OpenVox B100P, without success so far(See http://lists.freeswitch.org/pipermail/freeswitch-users/2011-April/071872.htm...)
That was a configuration problem (missing "node"/"mode" parameter), mixed with missing parameter validation in libpri and not setting sane defaults in ftmod_libpri (which is now fixed in git: http://oss.axsentis.de/gitweb/?p=freeswitch.git;a=commitdiff;h=2ac7a9de4f69 ).
Holy moly! Thanks Stefan, that's fantastic! Tested and works with the OpenVox B100P! In case you ever come to Vienna, let me invite you to a beer or a Mate at metalab(http://metalab.at) as a little gesture of appreciation(You have no idea on how many levels this fix helps me)! Cheers, Christian
Hi Christian, I am using a now working version with trhee HFC Singleport cards, costs about 10 Euro per ISDN Channel. After investigating and resolving some problem (with help of Stefan Knoblich, thank you very much!) in freeftdm and libpri, there is now just an kernel memory leak in slib memory. Currently I am investigating this and hope to be able to fix this within the next weeks. The leak is 480 byte per minute, not regarding if there are calls or not. I am just rebooting the server every week on sunday night, so currently it works as I need. Regards, Markus Müller
I'm having a hard time finding a working ISDN-Card for FreeSWITCH. I've succesfully tested the Sangoma A500 and it would be a great card - but the card is just a litte bit too long for the mini-ITX-Hardware we want to use. Therefore i'm desperately looking for alternatives:
- I've tested an OpenVox B100P, without success so far(See http://lists.freeswitch.org/pipermail/freeswitch-users/2011-April/071872.htm...) - Today i've installed an Eicon Diva BRI-2 card but so far i was not able to get a working setup, right now i have no clue how to continue marrying FreeTDM with the official CAPI-drivers
So if anyone has a working setup with EuroISDN in PTP- and TE-mode and a card other than Sangoma A500, please let me know! Or if you know there's nothing working BUT Sangoma A500, i'm happy too(Then i have a final answer at least).
In case anyone knows how to get a Eicon/Dialogic Diva BRI-2 card to work with FreeTDM i'd also be very thankful for a comment. I've installed the drivers provided by Dialogic(Diva4Linux 9.50111-98) and in an blind attempt tried to configure FreeSWITCH with libpri, so far the card has not been recognized. Unfortunately i have a limited knowledge about ISDN beyond vanilla installation of drivers and getting the drivers/devices/modules to show up in Linux(i.e. i don't really know what's going on between ftdm and the diverse ISDN-drivers).
Best regards Christian
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hi all, Is this normal: i can make only a single selection from a database in single context? Example: <extension name="cforward_only_db" > <condition field="destination_number" expression="^cforward_only_db$" break="never"> </condition> <condition field="${dummy}" expression="^$" break="never"> </condition> <condition field="${db(select/thomasfwdstatus/thomas)}" expression="^1$" break="on-true" > <action application="playback" data="$${play_prefix}/cforward/alle-callfw-ist-an.wav"/> <anti-action application="playback" data="$${play_prefix}/cforward/all-fw-is-off.wav"/> </condition> </extension> When i make a new extension: <condition field="${db(select/thomasfwdstatus1/thomas)}" expression="^1$" break="on-true" > fs fails with an error message: regexp fails. When i create a new context, and the syntax is the same, fs accept this. there is a opportunity in an existing contexty with multipe database selections? thank you --------------- Du kannst mich jederzeit kostenlos per Festnetz erreichen unter: http://www.blindi.net/callback homepage: http://www.blindi.net blinde-misc mailingliste für blinde. anmeldung unter: http://www.blindi.net/mailman/listinfo/blinde-misc
Thomas, Could you pastebin the extension that does not work? Also, please pastebin two call examples: one that works and one that fails. We should be able to assist from there. Thanks, MC On Mon, May 16, 2011 at 10:46 AM, Thomas Hoellriegel <admin@blindi.net>wrote:
Hi all, Is this normal: i can make only a single selection from a database in single context? Example: <extension name="cforward_only_db" > <condition field="destination_number" expression="^cforward_only_db$" break="never"> </condition> <condition field="${dummy}" expression="^$" break="never"> </condition>
<condition field="${db(select/thomasfwdstatus/thomas)}" expression="^1$" break="on-true" > <action application="playback" data="$${play_prefix}/cforward/alle-callfw-ist-an.wav"/> <anti-action application="playback" data="$${play_prefix}/cforward/all-fw-is-off.wav"/>
</condition> </extension>
When i make a new extension: <condition field="${db(select/thomasfwdstatus1/thomas)}" expression="^1$" break="on-true" > fs fails with an error message: regexp fails. When i create a new context, and the syntax is the same, fs accept this. there is a opportunity in an existing contexty with multipe database selections? thank you
--------------- Du kannst mich jederzeit kostenlos per Festnetz erreichen unter: http://www.blindi.net/callback homepage: http://www.blindi.net blinde-misc mailingliste für blinde. anmeldung unter: http://www.blindi.net/mailman/listinfo/blinde-misc
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (6)
-
Christian Benke
-
João Mesquita
-
Markus Müller
-
Michael Collins
-
Stefan Knoblich
-
Thomas Hoellriegel