running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success. ------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1: ------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] ------------------------------------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2: ------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request [DEBUG] esl.c:1465 esl_send() SEND auth ClueCon ------------------------------------------------------------------------------------------------------------------------------------------------ ------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3: ------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request [DEBUG] esl.c:1465 esl_send() SEND auth ClueCon [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted [DEBUG] esl.c:1465 esl_send() SEND log ------------------------------------------------------------------------------------------------------------------------------------------------ -- regards, akhil
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)? -- Sudhanshu On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you do a pastebin of the contents of your conf/autoload_configs/event_socket.conf.xml On Thu, Dec 11, 2014 at 10:10 AM, Sudhanshu <sudhansh@gmail.com> wrote:
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)?
-- Sudhanshu
On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
pastebin: 23716 regards, akhil On Fri, Dec 12, 2014 at 12:24 AM, Chris Tunbridge <blasterjr@gmail.com> wrote:
Can you do a pastebin of the contents of your conf/autoload_configs/event_socket.conf.xml
On Thu, Dec 11, 2014 at 10:10 AM, Sudhanshu <sudhansh@gmail.com> wrote:
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)?
-- Sudhanshu
On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- regards, akhil
Please see the logs: pastebin : 23717 regards, akhil On Thu, Dec 11, 2014 at 10:40 PM, Sudhanshu <sudhansh@gmail.com> wrote:
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)?
-- Sudhanshu
On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- regards, akhil
Always use syntax highlighting whenever possible. Have you tried disabling the modules which fail to load in your modules.conf.xml? Ideally freeswitch should handle it, but still, it is worth a shot. Also, What happens when you start freeswitch as a normal process (and not as a daemon)? Do you see a freeswitch command prompt? -- Sudhanshu On Fri, Dec 12, 2014 at 12:06 PM, akhil garg <akhilgarg7@gmail.com> wrote:
Please see the logs: pastebin : 23717
regards, akhil
On Thu, Dec 11, 2014 at 10:40 PM, Sudhanshu <sudhansh@gmail.com> wrote:
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)?
-- Sudhanshu
On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- regards, akhil
Dear Sudhanshu, I have tried disabling the modules giving error on startup of freeswitch but its not helping out. It seems there is some issue related to tcp socket when using loopback adddress. Regards, Akhil On Sat, Dec 13, 2014 at 5:38 PM, Sudhanshu <sudhansh@gmail.com> wrote:
Always use syntax highlighting whenever possible.
Have you tried disabling the modules which fail to load in your modules.conf.xml? Ideally freeswitch should handle it, but still, it is worth a shot.
Also, What happens when you start freeswitch as a normal process (and not as a daemon)? Do you see a freeswitch command prompt?
-- Sudhanshu
On Fri, Dec 12, 2014 at 12:06 PM, akhil garg <akhilgarg7@gmail.com> wrote:
Please see the logs: pastebin : 23717
regards, akhil
On Thu, Dec 11, 2014 at 10:40 PM, Sudhanshu <sudhansh@gmail.com> wrote:
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)?
-- Sudhanshu
On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- regards, akhil
-- regards, akhil
Debian? On Tue, Dec 16, 2014 at 5:49 AM, akhil garg <akhilgarg7@gmail.com> wrote:
Dear Sudhanshu, I have tried disabling the modules giving error on startup of freeswitch but its not helping out. It seems there is some issue related to tcp socket when using loopback adddress.
Regards, Akhil
On Sat, Dec 13, 2014 at 5:38 PM, Sudhanshu <sudhansh@gmail.com> wrote:
Always use syntax highlighting whenever possible.
Have you tried disabling the modules which fail to load in your modules.conf.xml? Ideally freeswitch should handle it, but still, it is worth a shot.
Also, What happens when you start freeswitch as a normal process (and not as a daemon)? Do you see a freeswitch command prompt?
-- Sudhanshu
On Fri, Dec 12, 2014 at 12:06 PM, akhil garg <akhilgarg7@gmail.com> wrote:
Please see the logs: pastebin : 23717
regards, akhil
On Thu, Dec 11, 2014 at 10:40 PM, Sudhanshu <sudhansh@gmail.com> wrote:
Enable debug logging and then check freeswitch.log. What happens when you start freeswitch as anormal process (and not as a daemon)?
-- Sudhanshu
On Thu, Dec 11, 2014 at 2:30 PM, akhil garg <akhilgarg7@gmail.com> wrote:
running "fs_cli -H 127.0.0.1 -P 8021 -d 7" gives different outputs but no success.
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 1:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1]
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 2:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT 3:
------------------------------------------------------------------------------------------------------------------------------------------------ [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request
[DEBUG] esl.c:1465 esl_send() SEND auth ClueCon
[DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted
[DEBUG] esl.c:1465 esl_send() SEND log
------------------------------------------------------------------------------------------------------------------------------------------------
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- regards, akhil
-- regards, akhil
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- *Brian West* brian@freeswitch.org *Twitter: @FreeSWITCH , @briankwest* http://www.freeswitchbook.com http://www.freeswitchcookbook.com *T:*+19184209001 | *F:*+19184209002 | *M:*+1918424WEST (9378) *iNUM:*+883 5100 1420 9001 | *ISN:*410*543 | *Skype:*briankwest
running "fs_cli -d 7" gives different outputs randomly but no success. success rate is 1-5 % only I can say. ------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT CASE 1: ------------------------------------------------------------------------------------------------------------------------------------------------ # fs_cli -d 7 [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] ------------------------------------------------------------------------------------------------------------------------------------------------ # netstat -anlp | grep 8021 tcp 0 0 127.0.0.1:8021 0.0.0.0:* LISTEN 13050/freeswitch tcp 0 28 127.0.0.1:8021 127.0.0.1:42948 ESTABLISHED 13050/freeswitch tcp 0 0 127.0.0.1:42948 127.0.0.1:8021 ESTABLISHED 13090/ds_cli ------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT CASE 2: ------------------------------------------------------------------------------------------------------------------------------------------------ # fs_cli -d 7 [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request [DEBUG] esl.c:1465 esl_send() SEND auth ClueCon ------------------------------------------------------------------------------------------------------------------------------------------------ # netstat -anlp | grep 8021 tcp 0 0 127.0.0.1:8021 0.0.0.0:* LISTEN 12872/freeswitch tcp 0 54 127.0.0.1:8021 127.0.0.1:42945 ESTABLISHED 12872/freeswitch tcp 0 0 127.0.0.1:42945 127.0.0.1:8021 ESTABLISHED 12914/ds_cli ------------------------------------------------------------------------------------------------------------------------------------------------ OUTPUT CASE 3: ------------------------------------------------------------------------------------------------------------------------------------------------ # fs_cli -d 7 [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /root/.fs_cli_conf. [DEBUG] esl_config.c:56 esl_config_open_file() Configuration file is /etc/fs_cli.conf. [DEBUG] fs_cli.c:1438 main() profile default does not exist using builtin profile [DEBUG] fs_cli.c:1468 main() Using profile internal [127.0.0.1] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [auth/request] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: auth/request [DEBUG] esl.c:1465 esl_send() SEND auth ClueCon [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Content-Type] = [command/reply] [DEBUG] esl.c:1265 esl_recv_event() RECV HEADER [Reply-Text] = [+OK accepted] [DEBUG] esl.c:1437 esl_recv_event() RECV MESSAGE Event-Name: SOCKET_DATA Content-Type: command/reply Reply-Text: +OK accepted [DEBUG] esl.c:1465 esl_send() SEND log ------------------------------------------------------------------------------------------------------------------------------------------------ Freeswitch release 1.5.6b (git version: 40c105322193b7d0160814ed8ffcd5bf7f566944) -- regards, akhil
participants (4)
-
akhil garg
-
Brian West
-
Chris Tunbridge
-
Sudhanshu