Hello, i am using a TC400B transcoding PCI card and the module mod_dahdi_codec seems to be loaded correctly, even i am getting freeswitch@internal> dahdi_transcode Using 0 encoders of a total of 92 available. Using 0 decoders of a total of 92 available. twice the message that i have encoders available. Now how can i use them? I want G723 calls transcoded to PCMA. I have set these variables. But when it comes to a call, it negoiates the codecs and fails. <X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMA,PCMU,G729,G723"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMA,PCMU,G729"/> Any help apreciated. Its my first contact with freeswitch and i find it to be a pretty straightforward software. good job. thx chris
make sure mod_g723_1 isn't loaded. /b On Apr 8, 2010, at 5:50 AM, Christian Hiller - Baig Tel LTD wrote:
Hello,
i am using a TC400B transcoding PCI card and the module mod_dahdi_codec seems to be loaded correctly, even i am getting
freeswitch@internal> dahdi_transcode Using 0 encoders of a total of 92 available. Using 0 decoders of a total of 92 available.
twice the message that i have encoders available. Now how can i use them? I want G723 calls transcoded to PCMA.
I have set these variables. But when it comes to a call, it negoiates the codecs and fails.
<X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMA,PCMU,G729,G723"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMA,PCMU,G729"/>
Any help apreciated. Its my first contact with freeswitch and i find it to be a pretty straightforward software. good job. thx
chris
and I think mod_g729 (pass-thru codec) should not be loaded either. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Thu, Apr 8, 2010 at 1:58 PM, Brian West <brian@freeswitch.org> wrote:
make sure mod_g723_1 isn't loaded.
/b
On Apr 8, 2010, at 5:50 AM, Christian Hiller - Baig Tel LTD wrote:
Hello,
i am using a TC400B transcoding PCI card and the module mod_dahdi_codec seems to be loaded correctly, even i am getting
freeswitch@internal> dahdi_transcode Using 0 encoders of a total of 92 available. Using 0 decoders of a total of 92 available.
twice the message that i have encoders available. Now how can i use them? I want G723 calls transcoded to PCMA.
I have set these variables. But when it comes to a call, it negoiates the codecs and fails.
<X-PRE-PROCESS cmd="set" data="global_codec_prefs=PCMA,PCMU,G729,G723"/> <X-PRE-PROCESS cmd="set" data="outbound_codec_prefs=PCMA,PCMU,G729"/>
Any help apreciated. Its my first contact with freeswitch and i find it to be a pretty straightforward software. good job. thx
chris
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You know we should deny load if something is already registered maybe? Cuz I can see this being a problem. /b On Apr 8, 2010, at 2:47 PM, Moises Silva wrote:
and I think mod_g729 (pass-thru codec) should not be loaded either.
Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
On Thu, Apr 8, 2010 at 1:58 PM, Brian West <brian@freeswitch.org> wrote: make sure mod_g723_1 isn't loaded.
/b
Yes, also may be mod_sofia should be notified ( I think there is a way already to notify about module loading/unloading ) so the list of codecs is reloaded, cuz right now if mod_sofia is loaded and later on a codec module is added, sofia does not know about it, or that's the impression I got when testing. Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com On Thu, Apr 8, 2010 at 3:59 PM, Brian West <brian@freeswitch.org> wrote:
You know we should deny load if something is already registered maybe?
Cuz I can see this being a problem.
/b
On Apr 8, 2010, at 2:47 PM, Moises Silva wrote:
and I think mod_g729 (pass-thru codec) should not be loaded either.
Moises Silva Senior Software Engineer Sangoma Technologies Inc. | 50 McIntosh Drive, Suite 120, Markham ON L3R 9T3 Canada t. 1 905 474 1990 x 128 | e. moy@sangoma.com
On Thu, Apr 8, 2010 at 1:58 PM, Brian West <brian@freeswitch.org> wrote:
make sure mod_g723_1 isn't loaded.
/b
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Brian West
-
Christian Hiller - Baig Tel LTD
-
Moises Silva