see what happens if you set hangup to some other key or the word "event" On Mon, Nov 23, 2009 at 2:17 PM, Phillip Jones <pjintheusa@gmail.com> wrote:

Thanks for replying.

Well in the log I see:

2009-11-23 15:13:22.015625 [DEBUG] switch_rtp.c:2282 RTP RECV DTMF #:760 2009-11-23 15:13:22.062500 [DEBUG] mod_conference.c:2379 Channel leaving conference, cause: NONE

which make sense because just above I see:

009-11-23 15:13:08.171875 [DEBUG] mod_conference.c:5508 Installing default caller control action 'hangup' bound to '#'.

The question I have - is how do I change that default caller control action if it is not in conference.conf.xml ??

<caller-controls> <group name="default"> ...

*<control action="energy up" digits="#"/>*

On Mon, Nov 23, 2009 at 2:35 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:

...

issue

console loglevel debug from the cli

then try again and see if there is any hint

On Mon, Nov 23, 2009 at 1:24 PM, Phillip Jones <pjintheusa@gmail.com>wrote:

...

Hi there,

I have created a simple conference that works great. The only problem is, when a participant press # it exits the call. So when a user enters a conference with a PIN, and by habit they enter 12345 followed by pound, it puts them in and then straight out.

So I edited conference.conf.xml so:

<!--control action="hangup" digits="#"/-->

and even assigned # to another function:

<control action="energy up" digits="#"/>

and the same occurs. Pressing # exits the conference.

What am I missing here?

tia - phil

Conf Setup:

<extension name="conference.conf"> <condition field="destination_number" expression="^(2125556625)$"> <action application="answer"/> <action application="conference" data="$1-${domain_name}@default +123"/> </condition> </extension>

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:213-799-1400

Anthony - setting <control action="hangup" digits="9"/> or <control action="hangup" digits="event"/> does not make a difference, even when the default profile has <param name="caller-controls" value="default"/> un-commented. Looks to me like that default group is ignored even when specifically referred to? As Michael says though, creating a specific group: <group name="myConf"> and adding <param name="caller-controls" value="myConf"/> in the default profile works a charm. I am good - but let me know if you want me to try anything else. Phil On Mon, Nov 23, 2009 at 3:27 PM, Michael Collins <msc@freeswitch.org> wrote:

On Mon, Nov 23, 2009 at 12:17 PM, Phillip Jones <pjintheusa@gmail.com>wrote:

...

Thanks for replying.

Well in the log I see:

2009-11-23 15:13:22.015625 [DEBUG] switch_rtp.c:2282 RTP RECV DTMF #:760 2009-11-23 15:13:22.062500 [DEBUG] mod_conference.c:2379 Channel leaving conference, cause: NONE

which make sense because just above I see:

009-11-23 15:13:08.171875 [DEBUG] mod_conference.c:5508 Installing default caller control action 'hangup' bound to '#'.

The question I have - is how do I change that default caller control action if it is not in conference.conf.xml ??

<caller-controls> <group name="default"> ...

*<control action="energy up" digits="#"/>*

I believe that this is because the caller-controls param is commented out in the default profile config. I prefer not to mess w/ the default configs which is why I recommended the custom configs in my previous email...

-MC

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Default controls are hard coded. If you want to change them you must use a name other than default. Mike On Nov 23, 2009, at 3:42 PM, Phillip Jones wrote:

Anthony - setting

<control action="hangup" digits="9"/>

or

<control action="hangup" digits="event"/>

does not make a difference, even when the default profile has

<param name="caller-controls" value="default"/>

un-commented.

Looks to me like that default group is ignored even when specifically referred to?

As Michael says though, creating a specific group:

<group name="myConf">

and adding

<param name="caller-controls" value="myConf"/> in the default profile works a charm.

I am good - but let me know if you want me to try anything else.

Phil

Michael that for the reply. I created a new group with # unbound and referenced it from the default profile: <param name="caller-controls" value="myConf"/> And that worked fine. Strangely though, changing the default group and referencing that from the default profile does not. <param name="caller-controls" value="default"/> Do you want me to test this on the latest trunk or is this as expected? Phil On Mon, Nov 23, 2009 at 3:12 PM, Michael Collins <msc@freeswitch.org> wrote:

On Mon, Nov 23, 2009 at 11:24 AM, Phillip Jones <pjintheusa@gmail.com>wrote:

...

Hi there,

I have created a simple conference that works great. The only problem is, when a participant press # it exits the call. So when a user enters a conference with a PIN, and by habit they enter 12345 followed by pound, it puts them in and then straight out.

So I edited conference.conf.xml so:

<!--control action="hangup" digits="#"/-->

and even assigned # to another function:

<control action="energy up" digits="#"/>

and the same occurs. Pressing # exits the conference.

What am I missing here?

tia - phil

Phil,

I recommend that you create a custom profile and a custom caller control group. Just copy the defaults and rename them to something meaningful. In conference.conf.xml you can add a new call control group like this:

<group name="custom"> <!-- notice the new name --> <control action="mute" digits="0"/>

<control action="deaf mute" digits="*"/>

<control action="energy up" digits="9"/>

<control action="energy equ" digits="8"/>

<control action="energy dn" digits="7"/>

<control action="vol talk up" digits="3"/>

<control action="vol talk zero" digits="2"/>

<control action="vol talk dn" digits="1"/>

<control action="vol listen up" digits="6"/>

<control action="vol listen zero" digits="5"/>

<control action="vol listen dn" digits="4"/>

<!-- Notice that I removed the hangup option; # digit is not bound to anything; you can bind it to something else if you wish --> </group>

Then make a copy of the default profile changing the profile name and the caller-controls parameter: <profile name="custom"> <!-- notice the new name --> <!-- snip -->

<param name="caller-controls" value="some name"/> <!-- snip -->

</profile>

Give that a whirl and report back. :) -MC

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org