Hello, My current challenge is getting the AutoAnswer to work on the 9133i phones to support Intercom functionality. Within the conf/dialplan/default.xml file I am basically using the FreeSWITCH default settings <extension name = "extension-intercom"> <condition field = "destination_number" expression = "^8(1[012][0-9])|8(10[012][0-9])$"> <!-- 3 or 4 digit extensions --> <action application = "set" data = "dialed_extension=$1"/> <action application = "export" data = "sip_auto_answer=true"/> <action application = "bridge" data = "user/${dialed_extension}@${domain_name}"/> </condition> </extension> The AutoAnswer is working on the single Aastra 6731i phone that I have in the system, but not on any of the 9133i phones. This is in spite of both phone models have the Auto-Answer parameter set in their individual internal configurations. 9133i: Incoming Intercom Settings -- Auto-Answer -- Enabled 6731i: Incoming Intercom Settings -- Auto-Answer -- Enabled NOTE - the 9133i extension's will ring, but not go into the AutoAnswer/Speaker/Intercom mode While searching the web for an answer I came across an old posting (Feb 11, 2011) where Tim St. Pierre indicates that he has a relatively large FreeSWITCH phone system incorporating a number of Aastra models. He goes on to say that he has Intercom calls (auto-answer to speaker phone) working on the 9133i phones (among others) I'd appreciate any advice anyone might have so that I can get the FreeSWITCH Intercom auto-answer working on the 9133i phones as well. Thanks, TF