TOO Frequent SIP Registration
Hi everyone, Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn't odd, writing when everything is ok is odd. For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like: sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>] On the phones I changed the "Reg Min Expires" to 300 and they disappeared from registration!! Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds. So ... How often show registered phones re-register? How/Where do I set it? Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones). For extra points does this relate to NAT Keepalive at all? I did google this but the only registration expiration info I can find is on gateways, not phones. Thanks, Sean
Likely relates to us detecting them as nat. Take a look at the registrations, do they say NAT? To confirm why you would look at the sip trace to see whats going on with the registration, my guess would be sip ALG on the client side messing up the traffic.
On Jun 10, 2015, at 1:30 PM, Sean Devoy <sdevoy@bizfocused.com> wrote:
Hi everyone,
Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn’t odd, writing when everything is ok is odd.
For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like: sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>]
On the phones I changed the “Reg Min Expires” to 300 and they disappeared from registration!! Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds.
So … How often show registered phones re-register? How/Where do I set it? Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones).
For extra points does this relate to NAT Keepalive at all?
I did google this but the only registration expiration info I can find is on gateways, not phones.
Thank you Michael. I did not see this as an issue of why are the be deregistered, just that they were re-registering unnecessarily. You are clearly onto something, these registrations all say “fs_nat=yes” after their IP addresses in “show registrations”. I will check SIP traffic and check ALG on the router. And of course this explains why it is only one site! From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Wednesday, June 10, 2015 1:41 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Likely relates to us detecting them as nat. Take a look at the registrations, do they say NAT? To confirm why you would look at the sip trace to see whats going on with the registration, my guess would be sip ALG on the client side messing up the traffic. On Jun 10, 2015, at 1:30 PM, Sean Devoy <sdevoy@bizfocused.com<mailto:sdevoy@bizfocused.com>> wrote: Hi everyone, Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn’t odd, writing when everything is ok is odd. For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like: sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>] On the phones I changed the “Reg Min Expires” to 300 and they disappeared from registration!! Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds. So … How often show registered phones re-register? How/Where do I set it? Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones). For extra points does this relate to NAT Keepalive at all? I did google this but the only registration expiration info I can find is on gateways, not phones.
The SIP trace shows an oddity. The request has expires=3600, but the response from FS says expires=30. This is happening on ALL devices that have the latest CISCO firmware. Can you see anything wrong with the registration request: ------------------------------------------------------------------------ recv 767 bytes from udp/[69.137.35.208]:1024 at 18:59:53.382917: ------------------------------------------------------------------------ REGISTER sip: [my domain name] SIP/2.0 Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport From: "Ann-Marie" <sip:11@[my domain name]>;tag=86dec25c650ffef4o0 To: "Ann-Marie" <sip:11@[my domain name]> Call-ID: d1a1e2df-34f61b38@192.168.2.11 CSeq: 10545 REGISTER Max-Forwards: 70 Authorization: Digest username="11",realm="[my domain name]",nonce="6d8f48f6-0d40-4f18-8a87-4b961f7b7881",uri="sip: [my domain name]",algorithm=MD5,response="c73d90489df58e17dad9a9d3b1b06865",qop=auth,nc=00000010,cnonce="4c9c7235" Contact: "Ann-Marie" <sip:11@69.137.35.208:1024>;expires=3600 User-Agent: Cisco/SPA504G-7.5.5 Content-Length: 0 Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE Supported: replaces ------------------------------------------------------------------------ send 614 bytes to udp/[69.137.35.208]:1024 at 18:59:53.386375: ------------------------------------------------------------------------ SIP/2.0 200 OK Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport=1024 From: "Ann-Marie" <sip:11@[my domain name]>;tag=86dec25c650ffef4o0 To: "Ann-Marie" <sip:11@[my domain name]>;tag=tpUU52gppFZrj Call-ID: d1a1e2df-34f61b38@192.168.2.11 CSeq: 10545 REGISTER Contact: <sip:11@69.137.35.208:1024>;expires=30 Date: Wed, 10 Jun 2015 18:59:53 GMT User-Agent: FreeSWITCH-mod_sofia/1.2.22+git~20140309T212137Z~65fed130e5~64bit Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: path, replaces Content-Length: 0 From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Wednesday, June 10, 2015 1:41 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Likely relates to us detecting them as nat. Take a look at the registrations, do they say NAT? To confirm why you would look at the sip trace to see whats going on with the registration, my guess would be sip ALG on the client side messing up the traffic. On Jun 10, 2015, at 1:30 PM, Sean Devoy <sdevoy@bizfocused.com<mailto:sdevoy@bizfocused.com>> wrote: Hi everyone, Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn’t odd, writing when everything is ok is odd. For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like: sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>] On the phones I changed the “Reg Min Expires” to 300 and they disappeared from registration!! Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds. So … How often show registered phones re-register? How/Where do I set it? Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones). For extra points does this relate to NAT Keepalive at all? I did google this but the only registration expiration info I can find is on gateways, not phones.
Every time I have ever looked at an edited sip trace, the real problem has been obscured by the edits, so I don't bother looking at them anymore . Check out the sip trace and debug and your config to see why it's detecting nat On Wednesday, June 10, 2015, Sean Devoy <sdevoy@bizfocused.com> wrote:
The SIP trace shows an oddity. The request has expires=3600, but the response from FS says expires=30. This is happening on ALL devices that have the latest CISCO firmware. Can you see anything wrong with the registration request:
------------------------------------------------------------------------
recv 767 bytes from udp/[69.137.35.208]:1024 at 18:59:53.382917:
------------------------------------------------------------------------
REGISTER sip: [my domain name] SIP/2.0
Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport
From: "Ann-Marie" <sip:11@[my domain name]>;tag=86dec25c650ffef4o0
To: "Ann-Marie" <sip:11@[my domain name]>
Call-ID: d1a1e2df-34f61b38@192.168.2.11 <javascript:_e(%7B%7D,'cvml','d1a1e2df-34f61b38@192.168.2.11');>
CSeq: 10545 REGISTER
Max-Forwards: 70
Authorization: Digest username="11",realm="[my domain name]",nonce="6d8f48f6-0d40-4f18-8a87-4b961f7b7881",uri="sip: [my domain name]",algorithm=MD5,response="c73d90489df58e17dad9a9d3b1b06865",qop=auth,nc=00000010,cnonce="4c9c7235"
Contact: "Ann-Marie" <sip:11@69.137.35.208:1024>;expires=3600
User-Agent: Cisco/SPA504G-7.5.5
Content-Length: 0
Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE
Supported: replaces
------------------------------------------------------------------------
send 614 bytes to udp/[69.137.35.208]:1024 at 18:59:53.386375:
------------------------------------------------------------------------
SIP/2.0 200 OK
Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport=1024
From: "Ann-Marie" <sip:11@[my domain name]>;tag=86dec25c650ffef4o0
To: "Ann-Marie" <sip:11@[my domain name]>;tag=tpUU52gppFZrj
Call-ID: d1a1e2df-34f61b38@192.168.2.11 <javascript:_e(%7B%7D,'cvml','d1a1e2df-34f61b38@192.168.2.11');>
CSeq: 10545 REGISTER
Contact: <sip:11@69.137.35.208:1024>;expires=30
Date: Wed, 10 Jun 2015 18:59:53 GMT
User-Agent: FreeSWITCH-mod_sofia/1.2.22+git~20140309T212137Z~65fed130e5~64bit
Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE
Supported: path, replaces
Content-Length: 0
*From:* freeswitch-users-bounces@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces@lists.freeswitch.org');> [mailto:freeswitch-users-bounces@lists.freeswitch.org <javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces@lists.freeswitch.org');>] *On Behalf Of *Michael Jerris *Sent:* Wednesday, June 10, 2015 1:41 PM *To:* FreeSWITCH Users Help *Subject:* Re: [Freeswitch-users] TOO Frequent SIP Registration
Likely relates to us detecting them as nat. Take a look at the registrations, do they say NAT? To confirm why you would look at the sip trace to see whats going on with the registration, my guess would be sip ALG on the client side messing up the traffic.
On Jun 10, 2015, at 1:30 PM, Sean Devoy <sdevoy@bizfocused.com <javascript:_e(%7B%7D,'cvml','sdevoy@bizfocused.com');>> wrote:
Hi everyone,
Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn’t odd, writing when everything is ok is odd.
For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like:
sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>]
On the phones I changed the “Reg Min Expires” to 300 and they disappeared from registration!!
Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds.
So …
How often show registered phones re-register?
How/Where do I set it?
Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones).
For extra points does this relate to NAT Keepalive at all?
I did google this but the only registration expiration info I can find is on gateways, not phones.
Michael, Sorry, I am paranoid about publishing the FQDN of my FS server. I have so many hackers without publishing it, it makes me crazy. These are NAT devices. Is registration every 30 seconds required for ALL NAT devices and I just never noticed? Let me give you more information as I think everything may be working just fine now. What brought this to my attention was a console window open with loglevel set to 5. There were LOTS of these purple auth REGISTER lines from ONE customer site. During my investigation, I found that my remote desktop login to that site was slow and bursty. When I got around to sip tracing, the problem seemed to have gone away. I noticed the REGISTER events every 30 seconds, but no log entry was generated. I think their line was faulting and their phones WERE actually registering again following a disconnect, causing the log entry. When they are still registered, no log entry is generated. Does that sound correct? If so, this is a case of “a little knowledge can be dangerous”, sorry to bother you. As always thanks for your help. Sean From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, June 11, 2015 5:00 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Every time I have ever looked at an edited sip trace, the real problem has been obscured by the edits, so I don't bother looking at them anymore . Check out the sip trace and debug and your config to see why it's detecting nat On Wednesday, June 10, 2015, Sean Devoy <sdevoy@bizfocused.com<mailto:sdevoy@bizfocused.com>> wrote: The SIP trace shows an oddity. The request has expires=3600, but the response from FS says expires=30. This is happening on ALL devices that have the latest CISCO firmware. Can you see anything wrong with the registration request: ------------------------------------------------------------------------ recv 767 bytes from udp/[69.137.35.208]:1024 at 18:59:53.382917: ------------------------------------------------------------------------ REGISTER sip: [my domain name] SIP/2.0 Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport From: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>>;tag=86dec25c650ffef4o0 To: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>> Call-ID: d1a1e2df-34f61b38@192.168.2.11<javascript:_e(%7B%7D,'cvml','d1a1e2df-34f61b38@192.168.2.11');> CSeq: 10545 REGISTER Max-Forwards: 70 Authorization: Digest username="11",realm="[my domain name]",nonce="6d8f48f6-0d40-4f18-8a87-4b961f7b7881",uri="sip: [my domain name]",algorithm=MD5,response="c73d90489df58e17dad9a9d3b1b06865",qop=auth,nc=00000010,cnonce="4c9c7235" Contact: "Ann-Marie" <sip:11@69.137.35.208:1024<http://sip:11@69.137.35.208:1024>>;expires=3600 User-Agent: Cisco/SPA504G-7.5.5 Content-Length: 0 Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE Supported: replaces ------------------------------------------------------------------------ send 614 bytes to udp/[69.137.35.208]:1024 at 18:59:53.386375: ------------------------------------------------------------------------ SIP/2.0 200 OK Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport=1024 From: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>>;tag=86dec25c650ffef4o0 To: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>>;tag=tpUU52gppFZrj Call-ID: d1a1e2df-34f61b38@192.168.2.11<javascript:_e(%7B%7D,'cvml','d1a1e2df-34f61b38@192.168.2.11');> CSeq: 10545 REGISTER Contact: <sip:11@69.137.35.208:1024<http://sip:11@69.137.35.208:1024>>;expires=30 Date: Wed, 10 Jun 2015 18:59:53 GMT User-Agent: FreeSWITCH-mod_sofia/1.2.22+git~20140309T212137Z~65fed130e5~64bit Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: path, replaces Content-Length: 0 From: freeswitch-users-bounces@lists.freeswitch.org<javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces@lists.freeswitch.org');> [mailto:freeswitch-users-bounces@lists.freeswitch.org<javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces@lists.freeswitch.org');>] On Behalf Of Michael Jerris Sent: Wednesday, June 10, 2015 1:41 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Likely relates to us detecting them as nat. Take a look at the registrations, do they say NAT? To confirm why you would look at the sip trace to see whats going on with the registration, my guess would be sip ALG on the client side messing up the traffic. On Jun 10, 2015, at 1:30 PM, Sean Devoy <sdevoy@bizfocused.com<javascript:_e(%7B%7D,'cvml','sdevoy@bizfocused.com');>> wrote: Hi everyone, Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn’t odd, writing when everything is ok is odd. For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like: sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>] On the phones I changed the “Reg Min Expires” to 300 and they disappeared from registration!! Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds. So … How often show registered phones re-register? How/Where do I set it? Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones). For extra points does this relate to NAT Keepalive at all? I did google this but the only registration expiration info I can find is on gateways, not phones.
Michael, Please give me a minute of your time for my education… Do I have something I need to fix or not? Sean From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Sean Devoy Sent: Thursday, June 11, 2015 10:06 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Michael, Sorry, I am paranoid about publishing the FQDN of my FS server. I have so many hackers without publishing it, it makes me crazy. These are NAT devices. Is registration every 30 seconds required for ALL NAT devices and I just never noticed? Let me give you more information as I think everything may be working just fine now. What brought this to my attention was a console window open with loglevel set to 5. There were LOTS of these purple auth REGISTER lines from ONE customer site. During my investigation, I found that my remote desktop login to that site was slow and bursty. When I got around to sip tracing, the problem seemed to have gone away. I noticed the REGISTER events every 30 seconds, but no log entry was generated. I think their line was faulting and their phones WERE actually registering again following a disconnect, causing the log entry. When they are still registered, no log entry is generated. Does that sound correct? If so, this is a case of “a little knowledge can be dangerous”, sorry to bother you. As always thanks for your help. Sean From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Thursday, June 11, 2015 5:00 AM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Every time I have ever looked at an edited sip trace, the real problem has been obscured by the edits, so I don't bother looking at them anymore . Check out the sip trace and debug and your config to see why it's detecting nat On Wednesday, June 10, 2015, Sean Devoy <sdevoy@bizfocused.com<mailto:sdevoy@bizfocused.com>> wrote: The SIP trace shows an oddity. The request has expires=3600, but the response from FS says expires=30. This is happening on ALL devices that have the latest CISCO firmware. Can you see anything wrong with the registration request: ------------------------------------------------------------------------ recv 767 bytes from udp/[69.137.35.208]:1024 at 18:59:53.382917: ------------------------------------------------------------------------ REGISTER sip: [my domain name] SIP/2.0 Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport From: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>>;tag=86dec25c650ffef4o0 To: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>> Call-ID: d1a1e2df-34f61b38@192.168.2.11<javascript:_e(%7B%7D,'cvml','d1a1e2df-34f61b38@192.168.2.11');> CSeq: 10545 REGISTER Max-Forwards: 70 Authorization: Digest username="11",realm="[my domain name]",nonce="6d8f48f6-0d40-4f18-8a87-4b961f7b7881",uri="sip: [my domain name]",algorithm=MD5,response="c73d90489df58e17dad9a9d3b1b06865",qop=auth,nc=00000010,cnonce="4c9c7235" Contact: "Ann-Marie" <sip:11@69.137.35.208:1024<http://sip:11@69.137.35.208:1024>>;expires=3600 User-Agent: Cisco/SPA504G-7.5.5 Content-Length: 0 Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, REFER, UPDATE Supported: replaces ------------------------------------------------------------------------ send 614 bytes to udp/[69.137.35.208]:1024 at 18:59:53.386375: ------------------------------------------------------------------------ SIP/2.0 200 OK Via: SIP/2.0/UDP 69.137.35.208:1024;branch=z9hG4bK-b2eec5e;rport=1024 From: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>>;tag=86dec25c650ffef4o0 To: "Ann-Marie" <sip:11@[my domain name]<sip:11@[my%20domain%20name]>>;tag=tpUU52gppFZrj Call-ID: d1a1e2df-34f61b38@192.168.2.11<javascript:_e(%7B%7D,'cvml','d1a1e2df-34f61b38@192.168.2.11');> CSeq: 10545 REGISTER Contact: <sip:11@69.137.35.208:1024<http://sip:11@69.137.35.208:1024>>;expires=30 Date: Wed, 10 Jun 2015 18:59:53 GMT User-Agent: FreeSWITCH-mod_sofia/1.2.22+git~20140309T212137Z~65fed130e5~64bit Allow: INVITE, ACK, BYE, CANCEL, OPTIONS, MESSAGE, INFO, UPDATE, REGISTER, REFER, NOTIFY, PUBLISH, SUBSCRIBE Supported: path, replaces Content-Length: 0 From: freeswitch-users-bounces@lists.freeswitch.org<javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces@lists.freeswitch.org');> [mailto:freeswitch-users-bounces@lists.freeswitch.org<javascript:_e(%7B%7D,'cvml','freeswitch-users-bounces@lists.freeswitch.org');>] On Behalf Of Michael Jerris Sent: Wednesday, June 10, 2015 1:41 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] TOO Frequent SIP Registration Likely relates to us detecting them as nat. Take a look at the registrations, do they say NAT? To confirm why you would look at the sip trace to see whats going on with the registration, my guess would be sip ALG on the client side messing up the traffic. On Jun 10, 2015, at 1:30 PM, Sean Devoy <sdevoy@bizfocused.com<javascript:_e(%7B%7D,'cvml','sdevoy@bizfocused.com');>> wrote: Hi everyone, Forgive my lack of knowledge here. I have a multi-tenant server setup and oddly everything is working correctly! Working correctly isn’t odd, writing when everything is ok is odd. For one of my domains, all of the phones re-register about every 30 seconds. The log is filled with messages like: sofia_reg.c:1532 SIP auth challenge (REGISTER) on sofia profile 'external' for [43@<snip>] On the phones I changed the “Reg Min Expires” to 300 and they disappeared from registration!! Also, the phones are registered, I can call them and their status web page says next registration is xx (30 or less) seconds. So … How often show registered phones re-register? How/Where do I set it? Why only one of my domains? (This domain may be the only one to get the latest firmware in the phones). For extra points does this relate to NAT Keepalive at all? I did google this but the only registration expiration info I can find is on gateways, not phones.
participants (2)
-
Michael Jerris
-
Sean Devoy