THe extension below works fine except that the inbound caller ID is lost between the first and second bridge, it is replaced by 0000000000 on the local extensions. Does the first bridge function cause the inbound caller ID to be lost? Is there a way to keep it so it shows up during the second bridge? Thanks. Mario <extension name="u1phone"> <condition field="destination_number" expression="^2920$"> <!-- Make sure they hear rings after playing hi --> <action application="set" data="ringback=${us-ring}"/> <!--action application="playback" data="phrase:mvpeople:100"/--> <action application="execute_extension" data="2921 XML default"/> <!-- Next lines allow control after bridge timeout and hangup after bridge --> <action application="set" data="hangup_after_bridge=true"/> <action application="set" data="continue_on_fail=true"/> <!-- ring home extensions only for ## seconds --> <action application="set" data="call_timeout=15"/> <action application="bridge" data="group/MXT@${domain_name}"/> <!-- Say we are keep trying.... --> <action application="execute_extension" data="2922 XML default"/> <action application="playback" data="/usr/local/freeswitch/conf/mvsounds/we_trying_please_hold.wav"/> <!-- Setup so they hear music while ringing a second time --> <action application="set" data="ringback=$${hold_music}"/> <!-- this is needed to allow call_timeout to work after bridging to a gateway --> <action application="set" data="ignore_early_media=true"/> <!-- ring home extensions +cell phone for ## seconds NOTE THE NEXT 2 LINES DID NOT WORK TO SET TIMEOUT --> <!--action application="set" data="bridge_answer_timeout=10"/--> <!--action application="set" data="call_timeout=15"/--> to ring simoultaneously --> <action application="bridge" data="<originate_timeout=15>group/MXT@${domain_name}:_:sofia/gateway/uid1/19161234567:_:sofia/gateway/uid1/19162223333"/> <!-- No answer go to voicemail --> <action application="answer"/> <action application="voicemail" data="default ${domain_name} 100"/> </condition> </extension>