Hello, I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto? webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2. webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP Sorry if my question was a bit silly :) jalsot
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip. On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)? On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for? On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote: you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that. btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser? On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Tamas, For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked". On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
How should we apply security on the Verto client side? If Verto has the full capability of ESL, doesn't this open a door for hackers that knows about ESL? Thanks, Henry On Wed, Jul 9, 2014 at 3:07 PM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you
could of
course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Jul 9, 2014 10:37 PM, "Henry Huang" <red.rain.seven@gmail.com> wrote:
How should we apply security on the Verto client side? If Verto has the
full capability of ESL, doesn't this open a door for hackers that knows about ESL?
Thanks,
Henry
There is a security model in place. You have to explicitly unlock access to direct api commands as well as verto itself on per domain group our user basis. Also per call security is possible with event channels. For instance, in the demo, you only gain access to the event channel for conference member data when you call the conference and the conference mod grants it to your call. All of this must be tested and proven to be solid etc but the infrastructure is in place at this time.
On Wed, Jul 9, 2014 at 3:07 PM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com>
wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no,
you
can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but
note,
if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you, Anthony. The future of Verto is bright. Henry On Thu, Jul 10, 2014 at 5:55 PM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
On Jul 9, 2014 10:37 PM, "Henry Huang" <red.rain.seven@gmail.com> wrote:
How should we apply security on the Verto client side? If Verto has the
full capability of ESL, doesn't this open a door for hackers that knows about ESL?
Thanks,
Henry
There is a security model in place. You have to explicitly unlock access to direct api commands as well as verto itself on per domain group our user basis. Also per call security is possible with event channels. For instance, in the demo, you only gain access to the event channel for conference member data when you call the conference and the conference mod grants it to your call.
All of this must be tested and proven to be solid etc but the infrastructure is in place at this time.
On Wed, Jul 9, 2014 at 3:07 PM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com>
wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no,
you
can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but
note,
if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
> Hello, > > I'm thinking about to use mod_verto in the future and one question came > up regarding registration. Can we make the following scenario with > mod_verto? > > webrtc client registers to an FS instance with mod_verto (FS1) - like a > SIP reg. The media however has to bypass it and go between the client and > the media gateway (FS2). I'm not sure whether verto or sip should be used > between FS1 and FS2. > > webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto > media gateway --> SIP > > Sorry if my question was a bit silly :) > > jalsot
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
When I bypass the media to another FS (fs2), this would mean, that the first FS (fs1) has to translate signaling - even hold things - from verto to sip, correct? On Thu, Jul 10, 2014 at 12:07 AM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you
could of
course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Both Verto and SIP use SDP. Bypass media essentially hands the SDP from one leg to the other, whether that leg is SIP, Verto, or anything else that uses SDP does not matter. The SDP is unmodified by FreeSWITCH and any/all descriptions and associated media streams go unmodified as well. Of course it has to translate signaling but I'm not sure what you mean by "hold things". On Thu, Jul 10, 2014 at 2:58 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
When I bypass the media to another FS (fs2), this would mean, that the first FS (fs1) has to translate signaling - even hold things - from verto to sip, correct?
On Thu, Jul 10, 2014 at 12:07 AM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Hello,
I'm thinking about to use mod_verto in the future and one question came up regarding registration. Can we make the following scenario with mod_verto?
webrtc client registers to an FS instance with mod_verto (FS1) - like a SIP reg. The media however has to bypass it and go between the client and the media gateway (FS2). I'm not sure whether verto or sip should be used between FS1 and FS2.
webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto media gateway --> SIP
Sorry if my question was a bit silly :)
jalsot
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
Thank you for the answer. Sorry, I meant call hold/unhold :) On Thu, Jul 10, 2014 at 4:19 PM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Both Verto and SIP use SDP. Bypass media essentially hands the SDP from one leg to the other, whether that leg is SIP, Verto, or anything else that uses SDP does not matter. The SDP is unmodified by FreeSWITCH and any/all descriptions and associated media streams go unmodified as well.
Of course it has to translate signaling but I'm not sure what you mean by "hold things".
On Thu, Jul 10, 2014 at 2:58 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
When I bypass the media to another FS (fs2), this would mean, that the first FS (fs1) has to translate signaling - even hold things - from verto to sip, correct?
On Thu, Jul 10, 2014 at 12:07 AM, Kristian Kielhofner <kris@kriskinc.com
wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com>
wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com>
wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any
advantage
over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote:
you can use bypass media anywhere in the chain that you want, but note, if you use bypass with a webrtc call, the other end needs to be able to speak all the bits of webrtc media interface. dtls, srtp, etc. If the other sip device does not support this, you can't use bypass, you could of course bypass on fs1 to fs2, and just have fs2 handle media to sip.
On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com>
wrote:
> Hello, > > I'm thinking about to use mod_verto in the future and one question > came > up regarding registration. Can we make the following scenario with > mod_verto? > > webrtc client registers to an FS instance with mod_verto (FS1) - > like a > SIP reg. The media however has to bypass it and go between the > client and > the media gateway (FS2). I'm not sure whether verto or sip should
be
> used > between FS1 and FS2. > > webrtc client----> FS1 mod_verto registrar/proxy --- FS2 mod_verto > media gateway --> SIP > > Sorry if my question was a bit silly :) > > jalsot
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
No problem. SIP and Verto (AFAIK) implement hold via SDP so that should be pretty transparent in bypass media mode. On Thu, Jul 10, 2014 at 11:06 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Thank you for the answer. Sorry, I meant call hold/unhold :)
On Thu, Jul 10, 2014 at 4:19 PM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Both Verto and SIP use SDP. Bypass media essentially hands the SDP from one leg to the other, whether that leg is SIP, Verto, or anything else that uses SDP does not matter. The SDP is unmodified by FreeSWITCH and any/all descriptions and associated media streams go unmodified as well.
Of course it has to translate signaling but I'm not sure what you mean by "hold things".
On Thu, Jul 10, 2014 at 2:58 AM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
When I bypass the media to another FS (fs2), this would mean, that the first FS (fs1) has to translate signaling - even hold things - from verto to sip, correct?
On Thu, Jul 10, 2014 at 12:07 AM, Kristian Kielhofner <kris@kriskinc.com> wrote:
Tamas,
For communication with the browser and application development Verto offers several advantages over SIP over WS/WSS. Certainly the most important would be integrated FreeSWITCH control and event integration. Use of this is obvious in the demo that is available but of course there are a variety of other uses and applications as well. I cannot stress how powerful this can be. Additionally, the library is much simpler to use and more functional than the various JS SIP stacks - last I checked call hold/unhold still didn't work with any of them where with verto it "just worked".
On Wed, Jul 9, 2014 at 2:17 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
I was just curious whether there is any advantage to use verto between FS boxes, but it seems, it is not an appropriate question as there is no support for that.
btw, what is the biggest advantage of verto over sip over wss? Smaller and simpler JS code in the browser?
On Wed, Jul 9, 2014 at 7:44 PM, Michael Jerris <mike@jerris.com> wrote:
there is no client portion in the module, that is all in js. So no, you can not trunk between 2 boxes with verto at this time at least. What advantage are you looking for?
On Jul 9, 2014, at 1:28 PM, Tamas Jalsovszky <jalsot@gmail.com> wrote:
Great, thank you for the fast response. Can verto work between fs1 and fs2? If yes, does it bring any advantage over sip (between fs1 and fs2)?
On Wed, Jul 9, 2014 at 4:26 PM, Michael Jerris <mike@jerris.com> wrote: > > you can use bypass media anywhere in the chain that you want, but > note, > if you use bypass with a webrtc call, the other end needs to be > able > to > speak all the bits of webrtc media interface. dtls, srtp, etc. If > the > other sip device does not support this, you can't use bypass, you > could of > course bypass on fs1 to fs2, and just have fs2 handle media to sip. > > On Jul 9, 2014, at 5:39 AM, Tamas Jalsovszky <jalsot@gmail.com> > wrote: > > > Hello, > > > > I'm thinking about to use mod_verto in the future and one > > question > > came > > up regarding registration. Can we make the following scenario > > with > > mod_verto? > > > > webrtc client registers to an FS instance with mod_verto (FS1) - > > like a > > SIP reg. The media however has to bypass it and go between the > > client and > > the media gateway (FS2). I'm not sure whether verto or sip should > > be > > used > > between FS1 and FS2. > > > > webrtc client----> FS1 mod_verto registrar/proxy --- FS2 > > mod_verto > > media gateway --> SIP > > > > Sorry if my question was a bit silly :) > > > > jalsot > > > > > _________________________________________________________________________ > Professional FreeSWITCH Consulting Services: > consulting@freeswitch.org > http://www.freeswitchsolutions.com > > FreeSWITCH-powered IP PBX: The CudaTel Communication Server > http://www.cudatel.com > > Official FreeSWITCH Sites > http://www.freeswitch.org > http://wiki.freeswitch.org > http://www.cluecon.com > > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > > > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Kristian Kielhofner
participants (5)
-
Anthony Minessale
-
Henry Huang
-
Kristian Kielhofner
-
Michael Jerris
-
Tamas Jalsovszky