Hello I have an FS running on XP I have two friends that are registered to my FS. they use X-LITE on XP also they have successed to dial to 888 and also to test 1234, but when they try to dial one friend to the other and vice versa it's not ringing . I have put my freeswitch.xml at http://pastebin.freeswitch.org/187, and my friends use the dial Number(it is also there user name): 110 and 114. Regards, Michael Mendel
As I have explained several times that you must use % instead of @ in the action command. Where you have ... <action application="bridge" data="sofia/test/$1@84.108.22.188:5060"/> Please use ... <action application="bridge" data="sofia/test/$1%84.108.22.188:5060"/> Mike -----Original Message----- From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wed 12/20/2006 11:47 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] (no subject) Hello I have an FS running on XP I have two friends that are registered to my FS. they use X-LITE on XP also they have successed to dial to 888 and also to test 1234, but when they try to dial one friend to the other and vice versa it's not ringing . I have put my freeswitch.xml at http://pastebin.freeswitch.org/187, and my friends use the dial Number(it is also there user name): 110 and 114. Regards, Michael Mendel
Hello Mike Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. Regards, Michael Mendel On 12/20/06, Mike Murdock <mmurdock@coppercom.com> wrote:
As I have explained several times that you must use % instead of @ in the action command.
Where you have ... <action application="bridge" data="sofia/test/$1@84.108.22.188:5060"/> Please use ... <action application="bridge" data="sofia/test/$1%84.108.22.188:5060"/>
Mike
-----Original Message----- From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wed 12/20/2006 11:47 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] (no subject)
Hello
I have an FS running on XP I have two friends that are registered to my FS. they use X-LITE on XP also they have successed to dial to 888 and also to test 1234, but when they try to dial one friend to the other and vice versa it's not ringing .
I have put my freeswitch.xml at http://pastebin.freeswitch.org/187, and my friends use the dial Number(it is also there user name): 110 and 114.
Regards, Michael Mendel
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Please make a pcap packet capture and email it to me. I'll take a look at it. - Jason On 12/20/06, michael mendel <mikemendel@gmail.com> wrote:
Hello Mike
Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry.
Regards, Michael Mendel
On 12/20/06, Mike Murdock <mmurdock@coppercom.com> wrote:
As I have explained several times that you must use % instead of @ in the
action command.
Where you have ... <action application="bridge" data="sofia/test/$1@84.108.22.188:5060"/> Please use ... <action application="bridge"
data="sofia/test/$1%84.108.22.188:5060"/>
Mike
-----Original Message----- From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wed 12/20/2006 11:47 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] (no subject)
Hello
I have an FS running on XP I have two friends that are registered to my
FS.
they use X-LITE on XP also they have successed to dial to 888 and also to test 1234, but when they try to dial one friend to the other and vice versa it's not ringing .
I have put my freeswitch.xml at http://pastebin.freeswitch.org/187 , and my friends use the dial Number(it is also there user name): 110 and 114.
Regards, Michael Mendel
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org
http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello Mike
Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190
than I get after putting % instead of @ * 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot
Create Outgoing Channel!*
Regards, Michael Mendel
On 12/20/06, Mike Murdock <mmurdock@coppercom.com> wrote:
As I have explained several times that you must use % instead of @ in the action command.
Where you have ... <action application="bridge" data="sofia/test/$1@84.108.22.188:5060"/> Please use ... <action application="bridge" data="sofia/test/$1%84.108.22.188:5060"/>
Mike
-----Original Message----- From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wed 12/20/2006 11:47 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] (no subject)
Hello
I have an FS running on XP I have two friends that are registered to my FS. they use X-LITE on XP also they have successed to dial to 888 and also to test 1234, but when they try to dial one friend to the other and vice versa it's not ringing .
I have put my freeswitch.xml at http://pastebin.freeswitch.org/187 , and my friends use the dial Number(it is also there user name): 110 and 114.
Regards, Michael Mendel
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Can you please post the entire output of the failed call, everything from when the call comes in, through the error message you posted below. ________________________________ From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wednesday, December 20, 2006 2:47 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] (no subject) Hello Mike Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190 than I get after putting % instead of @ 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot Create Outgoing Channel! Regards, Michael Mendel
On 12/20/06, Michael Jerris <mike@jerris.com> wrote:
Can you please post the entire output of the failed call, everything from when the call comes in, through the error message you posted below.
Hello Michael
The Error apears at line 943 of http://pastebin.freeswitch.org/191 Regards, Michael Mendel ------------------------------
*From:* michael mendel [mailto:mikemendel@gmail.com] *Sent:* Wednesday, December 20, 2006 2:47 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] (no subject)
Hello Mike
Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190
than I get after putting % instead of @
* 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot Create Outgoing Channel!*
Regards,
Michael Mendel
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Hello Michael I have also made a call in the oppsite direction http://pastebin.freeswitch.org/192 and I get the same Error. Regards, Michael Mendel On 12/21/06, michael mendel <mikemendel@gmail.com> wrote:
On 12/20/06, Michael Jerris <mike@jerris.com> wrote:
Can you please post the entire output of the failed call, everything from when the call comes in, through the error message you posted below.
Hello Michael
The Error apears at line 943 of http://pastebin.freeswitch.org/191
Regards, Michael Mendel
------------------------------
*From:* michael mendel [mailto: mikemendel@gmail.com] *Sent:* Wednesday, December 20, 2006 2:47 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] (no subject)
Hello Mike
Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190
than I get after putting % instead of @
* 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot Create Outgoing Channel!*
Regards,
Michael Mendel
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
I cleaned up the config and made the changes that Tony suggested. Please see the cleaned up config at: http://pastebin.freeswitch.org/193 . Also, please note, when creating a user you do not NEED a vcard in it, and you most definitely do not want to have someone else's vcard in, I removed them from your user. Mike ________________________________ From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wednesday, December 20, 2006 5:30 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] (no subject) Hello Michael I have also made a call in the oppsite direction http://pastebin.freeswitch.org/192 and I get the same Error. Regards, Michael Mendel On 12/21/06, michael mendel <mikemendel@gmail.com> wrote: On 12/20/06, Michael Jerris <mike@jerris.com > wrote: Can you please post the entire output of the failed call, everything from when the call comes in, through the error message you posted below. Hello Michael The Error apears at line 943 of http://pastebin.freeswitch.org/191 Regards, Michael Mendel ________________________________ From: michael mendel [mailto: mikemendel@gmail.com] Sent: Wednesday, December 20, 2006 2:47 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] (no subject) Hello Mike Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190 <http://pastebin.freeswitch.org/190> than I get after putting % instead of @ 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot Create Outgoing Channel! Regards, Michael Mendel _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
Hello Mike Thank you. I shoudn't enter format user%IP:port but only user%IP without :5060. Regards, Michael Mendel On 12/21/06, Michael Jerris <mike@jerris.com> wrote:
I cleaned up the config and made the changes that Tony suggested. Please see the cleaned up config at: http://pastebin.freeswitch.org/193 . Also, please note, when creating a user you do not NEED a vcard in it, and you most definitely do not want to have someone else's vcard in, I removed them from your user.
Mike
------------------------------
*From:* michael mendel [mailto:mikemendel@gmail.com] *Sent:* Wednesday, December 20, 2006 5:30 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] (no subject)
Hello Michael
I have also made a call in the oppsite direction
http://pastebin.freeswitch.org/192
and I get the same Error.
Regards,
Michael Mendel
On 12/21/06, *michael mendel* <mikemendel@gmail.com> wrote:
On 12/20/06, *Michael Jerris* <mike@jerris.com > wrote:
Can you please post the entire output of the failed call, everything from when the call comes in, through the error message you posted below.
Hello Michael
The Error apears at line 943 of http://pastebin.freeswitch.org/191
Regards,
Michael Mendel
------------------------------
*From:* michael mendel [mailto: mikemendel@gmail.com] *Sent:* Wednesday, December 20, 2006 2:47 PM *To:* freeswitch-users@lists.freeswitch.org *Subject:* Re: [Freeswitch-users] (no subject)
Hello Mike
Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190
than I get after putting % instead of @
* 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot Create Outgoing Channel!*
Regards,
Michael Mendel
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Actually, it's user%domain where user is the username and domain is the domain (or ip) that the phone registers as. ________________________________ From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wednesday, December 20, 2006 6:16 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] (no subject) Hello Mike Thank you. I shoudn't enter format user%IP:port but only user%IP without :5060. Regards, Michael Mendel
Please pastebin a larger chunk of the console log so we can see what is happening... just giving us a single line provides no context for the problem.. ________________________________ From: michael mendel [mailto:mikemendel@gmail.com] Sent: Wed 12/20/2006 1:47 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] (no subject) Hello Mike Thank you for your advice but I have already tried that issue , I still don't get any Ringing, Sorry. http://pastebin.freeswitch.org/190 than I get after putting % instead of @ 2006-12-20 21:30:28 [ERR] switch_ivr.c:2430 switch_ivr_originate() Cannot Create Outgoing Channel! Regards, Michael Mendel On 12/20/06, Mike Murdock < mmurdock@coppercom.com <mailto:mmurdock@coppercom.com> > wrote: As I have explained several times that you must use % instead of @ in the action command. Where you have ... <action application="bridge" data=" sofia/test/$1@84.108.22.188:5060"/> Please use ... <action application="bridge" data="sofia/test/$1%84.108.22.188:5060"/> Mike -----Original Message----- From: michael mendel [mailto: mikemendel@gmail.com] Sent: Wed 12/20/2006 11:47 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] (no subject) Hello I have an FS running on XP I have two friends that are registered to my FS. they use X-LITE on XP also they have successed to dial to 888 and also to test 1234, but when they try to dial one friend to the other and vice versa it's not ringing . I have put my freeswitch.xml at http://pastebin.freeswitch.org/187 , and my friends use the dial Number(it is also there user name): 110 and 114. Regards, Michael Mendel _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>
participants (4)
-
Jason Garland
-
Michael Jerris
-
michael mendel
-
Mike Murdock