Any news on this topic ? On Thu, 8 Apr 2010 21:55:35 +0200, wrote: Log is in http://pastebin.freeswitch.org/12665 [1] Dialplan is following (included in default freeswitch) : I forgot to mention that I'm using sangoma A400 with HW DTMF detection. François DE : freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] DE LA PART DE Michael Collins ENVOY : jeudi 8 avril 2010 19:59 : freeswitch-users@lists.freeswitch.org OBJET : Re: [Freeswitch-users] Problem sending DTMF using an FXS channel Pastebin your dialplan config that handles this call as well as a debug trace from the console. -MC On Thu, Apr 8, 2010 at 10:03 AM, Hello, I'm having trouble with calls to remote IVR using DTMF, when the A leg is an FXS port. What happens is when the key is pressed on the phone, the DTMF is sent inband to the callee party as voice, but also detected by freeswitch and so resent by freeswitch to the callee party. This results in unusability of called IVR. Is there any setting that could be used to prevent freeswitch from detecting DTMF and/or prevent freeswitch from resending the DTMF. Thanks François _______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org [2] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [3] UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org [4] Links: ------ [1] http://pastebin.freeswitch.org/12665 [2] mailto:FreeSWITCH-users@lists.freeswitch.org [3] http://lists.freeswitch.org/mailman/listinfo/freeswitch-users [4] http://www.freeswitch.org