Hi All, I have a DTMF problem in version FreeSWITCH Version 1.0.head (git-39ff78b 2011-02-18 20-16-11 -0600) Phone - Polycom 335 Connected to the FreeSWITCH. Dial out a External Number . Then dial a Extension on the Destination IVR ( Destination is not FreeSWITCH) ... most of the time FreeSWITCH not sending the correct digits. I can see from the Console only the First Digit Captured by FreeSWITCH not rest of the Digits this is happen randomly I try with different SIP Trunk from different provider.. Same behavior --- here is partial of DTMF first digit then no digits shows up on the CLI 2011-02-19 14:18:20.688643 [DEBUG] switch_rtp.c:2294 Send start packet for [2] ts=1463986596 dur=160/160/2080 seq=54483 2011-02-19 14:18:20.708130 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=320/320/2080 seq=54484 2011-02-19 14:18:20.728688 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=480/480/2080 seq=54485 2011-02-19 14:18:20.748147 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=640/640/2080 seq=54486 2011-02-19 14:18:20.768727 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=800/800/2080 seq=54487 2011-02-19 14:18:20.788050 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=960/960/2080 seq=54488 2011-02-19 14:18:20.808506 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=1120/1120/2080 seq=54489 2011-02-19 14:18:20.828043 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=1280/1280/2080 seq=54490 2011-02-19 14:18:20.848501 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=1440/1440/2080 seq=54491 2011-02-19 14:18:20.867984 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=1600/1600/2080 seq=54492 2011-02-19 14:18:20.888589 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=1760/1760/2080 seq=54493 2011-02-19 14:18:20.908531 [DEBUG] switch_rtp.c:2230 Send middle packet for [2] ts=1463986596 dur=1920/1920/2080 seq=54494 2011-02-19 14:18:20.927937 [DEBUG] switch_rtp.c:2230 Send end packet for [2] ts=1463986596 dur=2080/2080/2080 seq=54495 2011-02-19 14:18:20.927937 [DEBUG] switch_rtp.c:2230 Send end packet for [2] ts=1463986596 dur=2080/2080/2080 seq=54496 2011-02-19 14:18:20.927937 [DEBUG] switch_rtp.c:2230 Send end packet for [2] ts=1463986596 dur=2080/2080/2080 seq=54497 --- Please let me know how to fix this or is it a Bug? Thanks Lloyd