Re: [Freeswitch-users] FreeSWITCH, OSX, Libtool, Macports
Wish I could help more... this is what I tried today and all worked fine, I am on Snow Leopard. You may want to try to redo the git, may have been an xfr issue? 1, git pull followed by make current - worked 2. clean src fs dir, new git reload, bootstrap.sh, configure with ssl, make install - worked fine On May 21, 2012, at 10:29 AM, Neil Patel wrote:
Hi Mario,
Thanks for your valuable posts on getting FS up and running on OS X.
I'm doing so myself and ran into a snag compiling latest Git: http://jira.freeswitch.org/browse/FS-4230
Given your expertise on FS and OSX I thought you may be able to help me get through this issue. Any suggestions?
Thanks, Neil
On Fri, May 11, 2012 at 9:41 AM, Mario G <mario_fs@mgtech.com> wrote: Some answers for you:
On May 10, 2012, at 7:23 PM, Chris Mylonas wrote:
That's great Mario. I will update my blog accordingly where I posted some stuff (http://mrvoip.com.au/blog/install-freeswitch-osx-mysql-must-remove-macports)
I just winged it because it used to work, so most of the prerequisites were installed. I did not put the --with-openssl flag when doing configure. What functionality do I lose?
From what I remember, it complained about gnutis or something like that, you have to check the messages but it is really important, used to not be required. It took several days to figure this one out. I think the message was: configure: error: --with-ssl was given, but GNUTLS is not available.
pkgconfig was already on my system from earlier efforts - so I guess I got lucky with that one. To be honest, once I resolved my macports issues (by removing it) it was just like doing it in linux.
The funny thing is I still see a few pkgconfig missing messages during the make but FS works fine for me, I think it's for things I am not using. I will be looking into this more before I update the wiki.
I'd like to give it another shot with a fresh OSX install - but I really don't want to go about setting up my machine again! I have an old imac that is not doing much, but I don't think it will run 10.6 :( I will try and give it a shot this afternoon seeing as my girlfriend is out taking photos :)
FYI, when I have not updated for a long time or make major changes like updating xCode: I backup the Mac Mini running FS as a bootable partition (I use SuperDuper), then I connect it to an iMac and boot using firewire target mode to boot from the backup. Now I can play round all I want. If all goes well, I just restore to the Mini, if not I can start over. For frequent updates I just backup the FS bin and source in the Mini with and do a git pull, etc.... Mario G
Kind Regards, Chris
On 11/05/2012, at 11:48 AM, Mario G wrote:
Chris, I have been running FS on 10.6,x since 2010 fine and have been updating a lot recently to help testing, I have had no problems. I don't use macport stuff. I wrote the original FS osX wiki but there are some differences since 2010 (I am working on fixing the wiki in the next few weeks). The wiki install instructions work if you add the following. Hope this helps:
1. Add this info: FreeSWITCH™ has many functions that invoke PKG-CONFIG, so it must be downloaded and installed separately. # Got to [http://pkgconfig.freedesktop.org/releases/ here] and download the latest pkg-config, by default it is placed into your Downloads folder. MUST USE .25 for OSXdue to glib2 dependencies! # Open Downloads and click the file to uncompress it. # Launch the Terminal application if not already running and issue these commands to move the source to the src directory, build and install: cd ~/Downloads mv pkg-config-0.25 /usr/local/src cd /usr/local/src/pkg-config-0.25 ./configure make sudo make install <– sudo is required because binaries are loaded into /usr/bin
2. You MUST do this: ./bootstrap.sh ./configure --with-openssl
3. The FLITE fix is no longer needed.
On May 10, 2012, at 5:01 PM, Chris Mylonas wrote:
Hi FS Users,
tl;dr; - removed macports, removed tree, pulled fresh tree = installed FS on OSX.
Here is the longer version that had a bit of a pre-emptive whinge about libtool version mismatch. But we never got there - it worked!
I'm in the process of re-installing FS on OSX (10.6.8). I have removed Macports to try and get this up and running. I re-bootstrapped and got this error:
quiet_libtool: Version mismatch error. This is libtool 2.4, but the quiet_libtool: definition of this LT_INIT comes from libtool 2.2.4. quiet_libtool: You should recreate aclocal.m4 with macros from libtool 2.4 quiet_libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 63 make: *** [all] Error 2
Removed the whole git tree just in case there was some left over junk. Pulled a fresh tree and noticed this remark during a fresh bootstrap
arakis:freeswitch-git chrismylonas$ rm -Rf freeswitch/ arakis:freeswitch-git chrismylonas$ git clone git://git.freeswitch.org/freeswitch.git Cloning into freeswitch... remote: Counting objects: 185609, done. remote: Compressing objects: 100% (39208/39208), done. remote: Total 185609 (delta 143241), reused 181443 (delta 140035) Receiving objects: 100% (185609/185609), 77.85 MiB | 267 KiB/s, done. Resolving deltas: 100% (143241/143241), done. arakis:freeswitch-git chrismylonas$ cd freeswitch/ arakis:freeswitch chrismylonas$ ./bootstrap.sh bootstrap: checking installation... bootstrap: autoconf version 2.61 (ok) bootstrap: automake version 1.10 (ok) bootstrap: aclocal version 1.10 (ok) bootstrap: libtool version 2.2.4 (ok) Bootstrapping using: autoconf : /usr/bin/autoconf automake : /usr/bin/automake aclocal : /usr/bin/aclocal libtool : /usr/bin/glibtool (2.2.4.) libtoolize: /usr/bin/glibtoolize make : /usr/bin/make (GNU Make 3.81) awk : ()
It is still reporting a 2.2.4 version of libtool. ... ... ... In the end, it has been compiled and installed though _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks Mario, There was an old Jira that reported the same problem as mine, compiling on OSX: http://jira.freeswitch.org/browse/FS-1949 Looks like the fix had to do with setting some config parameters to compile FS in 64-bit mode (I'm on 64-bit macbook pro). Is this still necessary? I remember reading on another thread that nowadays you should not mess with the compile flags when running ./configure since the process auto-detects what you need. But still, is there any reason to force compile FS in 64 bit or 32 bit mode for OSX? Also note that I'm on OSX Lion, though I hope that isn't the cause. Thanks, Neil On Mon, May 21, 2012 at 1:40 PM, Mario G <mario_fs@mgtech.com> wrote:
Wish I could help more... this is what I tried today and all worked fine, I am on Snow Leopard. You may want to try to redo the git, may have been an xfr issue? 1, git pull followed by make current - worked 2. clean src fs dir, new git reload, bootstrap.sh, configure with ssl, make install - worked fine
On May 21, 2012, at 10:29 AM, Neil Patel wrote:
Hi Mario,
Thanks for your valuable posts on getting FS up and running on OS X.
I'm doing so myself and ran into a snag compiling latest Git: http://jira.freeswitch.org/browse/FS-4230
Given your expertise on FS and OSX I thought you may be able to help me get through this issue. Any suggestions?
Thanks, Neil
On Fri, May 11, 2012 at 9:41 AM, Mario G <mario_fs@mgtech.com> wrote:
Some answers for you:
On May 10, 2012, at 7:23 PM, Chris Mylonas wrote:
That's great Mario. I will update my blog accordingly where I posted some stuff ( http://mrvoip.com.au/blog/install-freeswitch-osx-mysql-must-remove-macports )
I just winged it because it used to work, so most of the prerequisites were installed. I did not put the --with-openssl flag when doing configure. What functionality do I lose?
From what I remember, it complained about gnutis or something like that, you have to check the messages but it is really important, used to not be required. It took several days to figure this one out. I think the message was: configure: error: --with-ssl was given, but GNUTLS is not available.
pkgconfig was already on my system from earlier efforts - so I guess I got lucky with that one. To be honest, once I resolved my macports issues (by removing it) it was just like doing it in linux.
The funny thing is I still see a few pkgconfig missing messages during the make but FS works fine for me, I think it's for things I am not using. I will be looking into this more before I update the wiki.
I'd like to give it another shot with a fresh OSX install - but I really don't want to go about setting up my machine again! I have an old imac that is not doing much, but I don't think it will run 10.6 :( I will try and give it a shot this afternoon seeing as my girlfriend is out taking photos :)
FYI, when I have not updated for a long time or make major changes like updating xCode: I backup the Mac Mini running FS as a bootable partition (I use SuperDuper), then I connect it to an iMac and boot using firewire target mode to boot from the backup. Now I can play round all I want. If all goes well, I just restore to the Mini, if not I can start over. For frequent updates I just backup the FS bin and source in the Mini with and do a git pull, etc.... Mario G
Kind Regards, Chris
On 11/05/2012, at 11:48 AM, Mario G wrote:
Chris, I have been running FS on 10.6,x since 2010 fine and have been updating a lot recently to help testing, I have had no problems. I don't use macport stuff. I wrote the original FS osX wiki but there are some differences since 2010 (I am working on fixing the wiki in the next few weeks). The wiki install instructions work if you add the following. Hope this helps:
1. Add this info: FreeSWITCH™ has many functions that invoke PKG-CONFIG, so it must be downloaded and installed separately. # Got to [http://pkgconfig.freedesktop.org/releases/ here] and download the latest pkg-config, by default it is placed into your Downloads folder. MUST USE .25 for OSXdue to glib2 dependencies! # Open Downloads and click the file to uncompress it. # Launch the Terminal application if not already running and issue these commands to move the source to the src directory, build and install: cd ~/Downloads mv pkg-config-0.25 /usr/local/src cd /usr/local/src/pkg-config-0.25 ./configure make sudo make install <– sudo is required because binaries are loaded into /usr/bin
2. You MUST do this: ./bootstrap.sh ./configure --with-openssl
3. The FLITE fix is no longer needed.
On May 10, 2012, at 5:01 PM, Chris Mylonas wrote:
Hi FS Users,
tl;dr; - removed macports, removed tree, pulled fresh tree = installed FS on OSX.
Here is the longer version that had a bit of a pre-emptive whinge about libtool version mismatch. But we never got there - it worked!
I'm in the process of re-installing FS on OSX (10.6.8). I have removed Macports to try and get this up and running. I re-bootstrapped and got this error:
quiet_libtool: Version mismatch error. This is libtool 2.4, but the quiet_libtool: definition of this LT_INIT comes from libtool 2.2.4. quiet_libtool: You should recreate aclocal.m4 with macros from libtool 2.4 quiet_libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 63 make: *** [all] Error 2
Removed the whole git tree just in case there was some left over junk. Pulled a fresh tree and noticed this remark during a fresh bootstrap
arakis:freeswitch-git chrismylonas$ rm -Rf freeswitch/ arakis:freeswitch-git chrismylonas$ git clone git://git.freeswitch.org/freeswitch.git Cloning into freeswitch... remote: Counting objects: 185609, done. remote: Compressing objects: 100% (39208/39208), done. remote: Total 185609 (delta 143241), reused 181443 (delta 140035) Receiving objects: 100% (185609/185609), 77.85 MiB | 267 KiB/s, done. Resolving deltas: 100% (143241/143241), done. arakis:freeswitch-git chrismylonas$ cd freeswitch/ arakis:freeswitch chrismylonas$ ./bootstrap.sh bootstrap: checking installation... bootstrap: autoconf version 2.61 (ok) bootstrap: automake version 1.10 (ok) bootstrap: aclocal version 1.10 (ok) bootstrap: libtool version 2.2.4 (ok) Bootstrapping using: autoconf : /usr/bin/autoconf automake : /usr/bin/automake aclocal : /usr/bin/aclocal libtool : /usr/bin/glibtool (2.2.4.) libtoolize: /usr/bin/glibtoolize make : /usr/bin/make (GNU Make 3.81) awk : ()
It is still reporting a 2.2.4 version of libtool. ... ... ... In the end, it has been compiled and installed though _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
Join Us At ClueCon - Aug 7-9, 2012
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
That is interesting, FS is running on a Mac Mini and is in 64 bit mode according to Activity Monitor. I did not add anything to the config flags. I am only using tools from Apple (XCODE 4.2) and never had this problem since I installed FS Oct 2010. I had updated 10.6, XCODE and FS several times and no issues. Keep in mind that the Mini was a clean install of 10.6 (from Apple) and it is primarily used for PBX. I never put anything else on it other than the FS prerequisites mentioned in the wiki and this post. I wonder if something was left over from previous attempts as FS installation. I have multiple machines and am stuck on Leopard due to Quicken (still too buggy), since I waited this long I thought I may as well wait for Mountain Lion and do a clean install of everything on that. Mario G On May 21, 2012, at 4:38 PM, Neil Patel wrote:
Thanks Mario,
There was an old Jira that reported the same problem as mine, compiling on OSX: http://jira.freeswitch.org/browse/FS-1949
Looks like the fix had to do with setting some config parameters to compile FS in 64-bit mode (I'm on 64-bit macbook pro). Is this still necessary? I remember reading on another thread that nowadays you should not mess with the compile flags when running ./configure since the process auto-detects what you need. But still, is there any reason to force compile FS in 64 bit or 32 bit mode for OSX?
Also note that I'm on OSX Lion, though I hope that isn't the cause.
Thanks, Neil
On Mon, May 21, 2012 at 1:40 PM, Mario G <mario_fs@mgtech.com> wrote: Wish I could help more... this is what I tried today and all worked fine, I am on Snow Leopard. You may want to try to redo the git, may have been an xfr issue? 1, git pull followed by make current - worked 2. clean src fs dir, new git reload, bootstrap.sh, configure with ssl, make install - worked fine
On May 21, 2012, at 10:29 AM, Neil Patel wrote:
Hi Mario,
Thanks for your valuable posts on getting FS up and running on OS X.
I'm doing so myself and ran into a snag compiling latest Git: http://jira.freeswitch.org/browse/FS-4230
Given your expertise on FS and OSX I thought you may be able to help me get through this issue. Any suggestions?
Thanks, Neil
On Fri, May 11, 2012 at 9:41 AM, Mario G <mario_fs@mgtech.com> wrote: Some answers for you:
On May 10, 2012, at 7:23 PM, Chris Mylonas wrote:
That's great Mario. I will update my blog accordingly where I posted some stuff (http://mrvoip.com.au/blog/install-freeswitch-osx-mysql-must-remove-macports)
I just winged it because it used to work, so most of the prerequisites were installed. I did not put the --with-openssl flag when doing configure. What functionality do I lose?
From what I remember, it complained about gnutis or something like that, you have to check the messages but it is really important, used to not be required. It took several days to figure this one out. I think the message was: configure: error: --with-ssl was given, but GNUTLS is not available.
pkgconfig was already on my system from earlier efforts - so I guess I got lucky with that one. To be honest, once I resolved my macports issues (by removing it) it was just like doing it in linux.
The funny thing is I still see a few pkgconfig missing messages during the make but FS works fine for me, I think it's for things I am not using. I will be looking into this more before I update the wiki.
I'd like to give it another shot with a fresh OSX install - but I really don't want to go about setting up my machine again! I have an old imac that is not doing much, but I don't think it will run 10.6 :( I will try and give it a shot this afternoon seeing as my girlfriend is out taking photos :)
FYI, when I have not updated for a long time or make major changes like updating xCode: I backup the Mac Mini running FS as a bootable partition (I use SuperDuper), then I connect it to an iMac and boot using firewire target mode to boot from the backup. Now I can play round all I want. If all goes well, I just restore to the Mini, if not I can start over. For frequent updates I just backup the FS bin and source in the Mini with and do a git pull, etc.... Mario G
Kind Regards, Chris
On 11/05/2012, at 11:48 AM, Mario G wrote:
Chris, I have been running FS on 10.6,x since 2010 fine and have been updating a lot recently to help testing, I have had no problems. I don't use macport stuff. I wrote the original FS osX wiki but there are some differences since 2010 (I am working on fixing the wiki in the next few weeks). The wiki install instructions work if you add the following. Hope this helps:
1. Add this info: FreeSWITCH™ has many functions that invoke PKG-CONFIG, so it must be downloaded and installed separately. # Got to [http://pkgconfig.freedesktop.org/releases/ here] and download the latest pkg-config, by default it is placed into your Downloads folder. MUST USE .25 for OSXdue to glib2 dependencies! # Open Downloads and click the file to uncompress it. # Launch the Terminal application if not already running and issue these commands to move the source to the src directory, build and install: cd ~/Downloads mv pkg-config-0.25 /usr/local/src cd /usr/local/src/pkg-config-0.25 ./configure make sudo make install <– sudo is required because binaries are loaded into /usr/bin
2. You MUST do this: ./bootstrap.sh ./configure --with-openssl
3. The FLITE fix is no longer needed.
On May 10, 2012, at 5:01 PM, Chris Mylonas wrote:
Hi FS Users,
tl;dr; - removed macports, removed tree, pulled fresh tree = installed FS on OSX.
Here is the longer version that had a bit of a pre-emptive whinge about libtool version mismatch. But we never got there - it worked!
I'm in the process of re-installing FS on OSX (10.6.8). I have removed Macports to try and get this up and running. I re-bootstrapped and got this error:
quiet_libtool: Version mismatch error. This is libtool 2.4, but the quiet_libtool: definition of this LT_INIT comes from libtool 2.2.4. quiet_libtool: You should recreate aclocal.m4 with macros from libtool 2.4 quiet_libtool: and run autoconf again. make[1]: *** [libfreeswitch_la-switch_apr.lo] Error 63 make: *** [all] Error 2
Removed the whole git tree just in case there was some left over junk. Pulled a fresh tree and noticed this remark during a fresh bootstrap
arakis:freeswitch-git chrismylonas$ rm -Rf freeswitch/ arakis:freeswitch-git chrismylonas$ git clone git://git.freeswitch.org/freeswitch.git Cloning into freeswitch... remote: Counting objects: 185609, done. remote: Compressing objects: 100% (39208/39208), done. remote: Total 185609 (delta 143241), reused 181443 (delta 140035) Receiving objects: 100% (185609/185609), 77.85 MiB | 267 KiB/s, done. Resolving deltas: 100% (143241/143241), done. arakis:freeswitch-git chrismylonas$ cd freeswitch/ arakis:freeswitch chrismylonas$ ./bootstrap.sh bootstrap: checking installation... bootstrap: autoconf version 2.61 (ok) bootstrap: automake version 1.10 (ok) bootstrap: aclocal version 1.10 (ok) bootstrap: libtool version 2.2.4 (ok) Bootstrapping using: autoconf : /usr/bin/autoconf automake : /usr/bin/automake aclocal : /usr/bin/aclocal libtool : /usr/bin/glibtool (2.2.4.) libtoolize: /usr/bin/glibtoolize make : /usr/bin/make (GNU Make 3.81) awk : ()
It is still reporting a 2.2.4 version of libtool. ... ... ... In the end, it has been compiled and installed though _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
Join Us At ClueCon - Aug 7-9, 2012
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
Join Us At ClueCon - Aug 7-9, 2012
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
Mario G
-
Neil Patel