Re: [Freeswitch-users] Not able to make an outgoing Call through FXO....
I think it's waiting for a dialtone before it sends the digits and then giving up because it can't fine one. Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com> To: freeswitch-users@lists.freeswitch.org; freeswitch-dev@lists.freeswitch.org Sent: Friday, January 4, 2008 4:24:07 AM Subject: Re: [Freeswitch-users] Not able to make an outgoing Call through FXO.... Hi Anthony, Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/> <!--action application="bridge" data="openzap/1/1"/>--> </condition> </extension> <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> The Openzap.conf.xml looks like below: <configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration> But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below: 2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default@192.168.2.51) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA: Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD freeswitch@sipxpbx.oneconv.com> freeswitch@sipxpbx.oneconv.com> freeswitch@sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Thanks, Irshad. On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct@yahoo.com> wrote: What does openzap.conf.xml look like? Perhaps you are using the default which only has 1 span defined. Try cloning the whole <span id="1"> block so there is a span 1 and 2 like this: <configuration name=" openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration> Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400 ----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com
To: freeswitch-dev@lists.freeswitch.org; freeswitch-users@lists.freeswitch.org Sent: Wednesday, January 2, 2008 12:40:14 AM Subject: [Freeswitch-users] Not able to make an outgoing Call through FXO.... Hi, Wishing U all a very Happy n Prosperous New Year!!!! I am trying to make an outgoing call using FXO connected to an external telephone line. Here is the set-up: 1. FXO connected to external telephone line 2. FXS connected to analog phone. The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1 [span zt] name => OpenZAP number => 1 fxo-channel => 4 The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows: <extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension> <extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension> While Start-up Freeswitch following logs were seen: 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap] and while I made a call following logs were seen: 2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. Could anyone help me out in getting FXO working ??? Thanks in advance... BR, Irshad. Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now. _______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org ____________________________________________________________________________________ Looking for last minute shopping deals? Find them fast with Yahoo! Search. http://tools.search.yahoo.com/newsearch/category.php?category=shopping
With the same set-up, Outgoing calls are working fine with Asterisk. Are there any tools to detect the presence of dial tone??? If it's any parameter issue, can we adjust those parameters??? NOTE: I copied tones.conf available from the source code to /etc/openzap/ BR, Irshad. On Jan 5, 2008 12:00 AM, Anthony Minessale <anthmct@yahoo.com> wrote:
I think it's waiting for a dialtone before it sends the digits and then giving up because it can't fine one.
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com> To: freeswitch-users@lists.freeswitch.org; freeswitch-dev@lists.freeswitch.org Sent: Friday, January 4, 2008 4:24:07 AM Subject: Re: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi Anthony,
Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/> <!--action application="bridge" data="openzap/1/1"/>--> </condition> </extension>
<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>
The Openzap.conf.xml looks like below:
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration>
But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below:
2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default@192.168.2.51) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA:
Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD
freeswitch@sipxpbx.oneconv.com>
freeswitch@sipxpbx.oneconv.com>
freeswitch@sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Thanks, Irshad.
On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct@yahoo.com> wrote:
What does openzap.conf.xml look like? Perhaps you are using the default which only has 1 span defined. Try cloning the whole <span id="1"> block so there is a span 1 and 2 like this:
<configuration name=" openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>
<span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>
</analog_spans> </configuration>
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com > To: freeswitch-dev@lists.freeswitch.org; freeswitch-users@lists.freeswitch.org Sent: Wednesday, January 2, 2008 12:40:14 AM Subject: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi,
Wishing U all a very Happy n Prosperous New Year!!!!
I am trying to make an outgoing call using FXO connected to an external telephone line.
Here is the set-up:
1. FXO connected to external telephone line 2. FXS connected to analog phone.
The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1
[span zt] name => OpenZAP number => 1 fxo-channel => 4
The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows:
<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>
<extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension>
While Start-up Freeswitch following logs were seen:
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
and while I made a call following logs were seen:
2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Could anyone help me out in getting FXO working ???
Thanks in advance...
BR, Irshad.
------------------------------ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ+>
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
------------------------------ Looking for last minute shopping deals? Find them fast with Yahoo! Search.<http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/category.php?category=shopping>
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yes, these are set in tones.conf. You will need to add the correct values for your area (we can add them to the default config if you can provide those). Also, please update to the current code, tony just added quite a few features to mod_openzap including support for hold music, transfer (blind and attended), and 3-way. Mike On Jan 9, 2008, at 7:57 AM, Irshad Ahamed wrote:
With the same set-up, Outgoing calls are working fine with Asterisk.
Are there any tools to detect the presence of dial tone??? If it's any parameter issue, can we adjust those parameters???
NOTE: I copied tones.conf available from the source code to /etc/ openzap/
BR, Irshad.
On Jan 5, 2008 12:00 AM, Anthony Minessale <anthmct@yahoo.com > wrote: I think it's waiting for a dialtone before it sends the digits and then giving up because it can't fine one.
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
----- Original Message ---- From: Irshad Ahamed < irshad.fswitch@gmail.com> To: freeswitch-users@lists.freeswitch.org; freeswitch-dev@lists.freeswitch.org Sent: Friday, January 4, 2008 4:24:07 AM Subject: Re: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi Anthony,
Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/> <!--action application="bridge" data="openzap/1/1"/>--> </condition> </extension>
<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>
The Openzap.conf.xml looks like below:
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration>
But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below:
2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8- a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond($ {is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default@192.168.2.51 ) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA: Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/ 2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed- e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD
freeswitch@sipxpbx.oneconv.com>
freeswitch@sipxpbx.oneconv.com >
freeswitch@sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Thanks, Irshad.
On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct@yahoo.com> wrote: What does openzap.conf.xml look like? Perhaps you are using the default which only has 1 span defined. Try cloning the whole <span id="1"> block so there is a span 1 and 2 like this:
<configuration name=" openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>
<span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>
</analog_spans> </configuration>
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com > To: freeswitch-dev@lists.freeswitch.org; freeswitch-users@lists.freeswitch.org Sent: Wednesday, January 2, 2008 12:40:14 AM Subject: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi,
Wishing U all a very Happy n Prosperous New Year!!!!
I am trying to make an outgoing call using FXO connected to an external telephone line.
Here is the set-up:
1. FXO connected to external telephone line 2. FXS connected to analog phone.
The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1
[span zt] name => OpenZAP number => 1 fxo-channel => 4
The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows:
<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>
<extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension>
While Start-up Freeswitch following logs were seen:
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs- channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo- channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
and while I made a call following logs were seen:
2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/ 2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031- bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Could anyone help me out in getting FXO working ???
Thanks in advance...
BR, Irshad.
Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Looking for last minute shopping deals? Find them fast with Yahoo! Search.
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I am from India. The Indian dial tone is a combination of 350 Hz tone and a 440 Hz tone. Anyways here is the snippet of my tones.conf @ /etc/openzap/ [us] generate-dial => v=-7;%(1000,0,350,440) detect-dial => 350,440 generate-ring => v=-7;%(2000,4000,440,480) detect-ring => 440,480 generate-busy => v=-7;%(500,500,480,620) detect-busy => 480,620 generate-attn => v=0;%(100,100,1400,2060,2450,2600) detect-attn => 1400,2060,2450,2600 generate-callwaiting-sas => v=0;%(300,0,440) detect-callwaiting-sas => 440 generate-callwaiting-cas => v=0;%(80,0,2750,2130) detect-callwaiting-cas => 2750,2130 detect-fail1 => 913.8 detect-fail2 => 1370.6 detect-fail3 => 776.7 BR, Irshad. On Jan 10, 2008 6:57 AM, Michael Jerris <mike@jerris.com> wrote:
Yes, these are set in tones.conf. You will need to add the correct values for your area (we can add them to the default config if you can provide those). Also, please update to the current code, tony just added quite a few features to mod_openzap including support for hold music, transfer (blind and attended), and 3-way. Mike
On Jan 9, 2008, at 7:57 AM, Irshad Ahamed wrote:
With the same set-up, Outgoing calls are working fine with Asterisk.
Are there any tools to detect the presence of dial tone??? If it's any parameter issue, can we adjust those parameters???
NOTE: I copied tones.conf available from the source code to /etc/openzap/
BR, Irshad.
On Jan 5, 2008 12:00 AM, Anthony Minessale <anthmct@yahoo.com > wrote:
I think it's waiting for a dialtone before it sends the digits and then giving up because it can't fine one.
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
----- Original Message ---- From: Irshad Ahamed < irshad.fswitch@gmail.com> To: freeswitch-users@lists.freeswitch.org; freeswitch-dev@lists.freeswitch.org Sent: Friday, January 4, 2008 4:24:07 AM Subject: Re: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi Anthony,
Thanks for the info. By adding the span-ID = 2 , I was able to receive an incoming call successfully. The dialplan/default.xml is as below: <extension name="incoming"> <condition field="destination_number" expression="^(1)$"> <action application="bridge" data="openzap/1/1"/> <!--action application="bridge" data="openzap/1/1"/>--> </condition> </extension>
<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>
The Openzap.conf.xml looks like below:
<configuration name="openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="9"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> <span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="1"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span> </analog_spans> </configuration>
But still I am unable to make an Outgoing Call. Please have a look at the Freeswitch Log below:
2008-01-04 15:45:03 [DEBUG] zap_analog.c:664 process_event() EVENT [OFFHOOK][1:1] STATE [DOWN] 2008-01-04 15:45:03 [DEBUG] zap_analog.c:726 process_event() Changing state on 1:1 from DOWN to DIALTONE 2008-01-04 15:45:03 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:03 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DIALTONE 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 4 2008-01-04 15:45:07 [DEBUG] zap_analog.c:492 zap_analog_channel_run() Changing state on 1:1 from DIALTONE to COLLECT 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:07 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for COLLECT 2008-01-04 15:45:07 [DEBUG] zap_analog.c:490 zap_analog_channel_run() DTMF 2 2008-01-04 15:45:07 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [COLLECTED_DIGIT] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:507 zap_analog_channel_run() Number obtained [42] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:508 zap_analog_channel_run() Changing state on 1:1 from COLLECT to IDLE 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for IDLE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [START] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OpenZAP/42 [8d46eb7f-4305-49e8-a4a5-eb97af3b696b] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:892 zap_channel_from_event() OpenZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OpenZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OpenZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OpenZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OpenZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:64 switch_core_standard_on_ring() Standard RING OpenZAP/42 2008-01-04 15:45:09 [INFO] mod_dialplan_xml.c:217 dialplan_hunt() Processing OpenZAP->42! 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions ${numbering_plan}() =~ // 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(1)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(43)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:108 parse_exten() Regex mismatch 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:106 parse_exten() test conditions destination_number(42) =~ /^(42)$/ 2008-01-04 15:45:09 [DEBUG] mod_dialplan_xml.c:273 dialplan_hunt() OpenZAP/42 State Change CS_RING -> CS_EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:406 switch_core_session_run() (OpenZAP/42) State EXECUTE 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:294 channel_on_execute() OpenZAP/42 CHANNEL EXECUTE 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:121 switch_core_standard_on_execute() Standard EXECUTE 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set(use_profile=${cond(${is_lan_addr(${network_addr})} == yes ? nat : default)}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set(use_profile=default) 2008-01-04 15:45:09 [DEBUG] mod_dptools.c:419 set_function() SET [use_profile]=[default] 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute set_user(default@${domain}) 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:158 switch_core_standard_on_execute() Expanded String set_user( default@192.168.2.51) 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute info() 2008-01-04 15:45:09 [CRIT] mod_dptools.c:630 info_function() CHANNEL_DATA: Channel-State: CS_EXECUTE Channel-State-Number: 4 Channel-Name: OpenZAP/42 Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Channel-Read-Codec-Name: PCMU Channel-Read-Codec-Rate: 8000 Channel-Write-Codec-Name: PCMU Channel-Write-Codec-Rate: 8000 Caller-Username: OpenZAP Caller-Dialplan: XML Caller-Caller-ID-Name: OpenZAP Caller-Caller-ID-Number: 1 Caller-Destination-Number: 42 Caller-Unique-ID: 8d46eb7f-4305-49e8-a4a5-eb97af3b696b Caller-Source: mod_openzap Caller-Context: default Caller-Channel-Name: OpenZAP/42 Caller-Channel-Created-Time: 1199441709953187 Caller-Channel-Answered-Time: 0 Caller-Channel-Hangup-Time: 0 Caller-Channel-Transfer-Time: 0 Caller-Screen-Bit: yes Caller-Privacy-Hide-Name: no Caller-Privacy-Hide-Number: no variable_use_profile: default variable_numbering_plan: US variable_user_name: default variable_domain_name: 192.168.2.51
2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute answer() 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:663 channel_receive_message_fxs() Changing state on 1:1 from IDLE to UP 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:339 switch_core_session_receive_message() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:09 [NOTICE] mod_dptools.c:361 answer_function() Channel [OpenZAP/42] has been answered 2008-01-04 15:45:09 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/42)2008-01-04 15:45:09 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-04 15:45:09 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/42 [bef803ed-e932-4a22-84e7-9131070fe771] 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/42 State Change CS_NEW -> CS_INIT 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for UP 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [UP] 2008-01-04 15:45:09 [DEBUG] zap_analog.c:55 analog_fxo_outgoing_call() Changing state on 2:1 from DOWN to DIALING 2008-01-04 15:45:09 [DEBUG] zap_analog.c:184 zap_analog_channel_run() ANALOG CHANNEL thread starting. 2008-01-04 15:45:09 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DIALING 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:397 switch_core_session_run() (OPENZAP/42) State INIT 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:256 channel_on_init() OPENZAP/42 State Change CS_INIT -> CS_RING 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:625 switch_ivr_originate() Raw Codec Activation Success L16@8000hz 1 channel 20ms 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:400 switch_core_session_run() (OPENZAP/42) State RING 2008-01-04 15:45:09 [DEBUG] mod_openzap.c:276 channel_on_ring() OPENZAP/42 CHANNEL RING 2008-01-04 15:45:09 [DEBUG] switch_ivr_originate.c:48 originate_on_ring() OPENZAP/42 State Change CS_RING -> CS_HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:415 switch_core_session_run() (OPENZAP/42) State HOLD 2008-01-04 15:45:09 [DEBUG] switch_core_state_machine.c:204 switch_core_standard_on_hold() Standard HOLD
freeswitch@sipxpbx.oneconv.com>
freeswitch@sipxpbx.oneconv.com >
freeswitch@sipxpbx.oneconv.com> 2008-01-04 15:45:39 [DEBUG] zap_analog.c:244 zap_analog_channel_run() Changing state on 2:1 from DIALING to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:467 zap_analog_channel_run() Changing state on 2:1 from BUSY to DOWN 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 2:1 for DOWN 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:916 on_fxo_signal() got FXO sig 2:1 [STOP] 2008-01-04 15:45:40 [NOTICE] mod_openzap.c:934 on_fxo_signal() Hangup OPENZAP/42 [CS_HOLD] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OPENZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended. 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OPENZAP/42) State HANGUP 2008-01-04 15:45:40 [WARNING] mod_openzap.c:319 channel_on_hangup() VETO Changing state on 2:1 from DOWN to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OPENZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OPENZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 4 (OPENZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 34 [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/42 [CS_EXECUTE] [NORMAL_CIRCUIT_CONGESTION] 2008-01-04 15:45:40 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/42 [KILL] 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/42 [BREAK] 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/42) State HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from UP to HANGUP 2008-01-04 15:45:40 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/42 CHANNEL HANGUP 2008-01-04 15:45:40 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/42, cause: NORMAL_CIRCUIT_CONGESTION 2008-01-04 15:45:40 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 3 (OpenZAP/42) Locked, Waiting on external entities 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 3 (OpenZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 4 (OPENZAP/42) Ended 2008-01-04 15:45:40 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OPENZAP/42 [CS_HANGUP] 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-04 15:45:40 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-04 15:45:40 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-04 15:45:53 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-04 15:45:53 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-04 15:45:53 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-04 15:45:53 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Thanks, Irshad.
On Jan 3, 2008 7:43 PM, Anthony Minessale < anthmct@yahoo.com> wrote:
What does openzap.conf.xml look like? Perhaps you are using the default which only has 1 span defined. Try cloning the whole <span id="1"> block so there is a span 1 and 2 like this:
<configuration name=" openzap.conf" description="OpenZAP Configuration"> <settings> <param name="debug" value="0"/> </settings> <analog_spans> <span id="1"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>
<span id="2"> <param name="tonegroup" value="us"/> <param name="digit-timeout" value="2000"/> <param name="max-digits" value="11"/> <param name="dialplan" value="XML"/> <param name="context" value="default"/> <!-- regex to stop dialing when it matches --> <!--<param name="dial-regex" value="5555"/>--> <!-- regex to stop dialing when it does not match --> <!--<param name="fail-dial-regex" value="^5"/>--> </span>
</analog_spans> </configuration>
Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/
AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org iax:guest@conference.freeswitch.org/888 googletalk:conf+888@conference.freeswitch.org pstn:213-799-1400
----- Original Message ---- From: Irshad Ahamed <irshad.fswitch@gmail.com > To: freeswitch-dev@lists.freeswitch.org; freeswitch-users@lists.freeswitch.org
Sent: Wednesday, January 2, 2008 12:40:14 AM Subject: [Freeswitch-users] Not able to make an outgoing Call through FXO....
Hi,
Wishing U all a very Happy n Prosperous New Year!!!!
I am trying to make an outgoing call using FXO connected to an external telephone line.
Here is the set-up:
1. FXO connected to external telephone line 2. FXS connected to analog phone.
The Openzap.conf @ /etc/openzap is as follows: [span zt] name => OpenZAP number => 1 fxs-channel => 1
[span zt] name => OpenZAP number => 1 fxo-channel => 4
The default.xml @ /usr/local/freeswitch/conf/dialplan is configured for inward and outgoing calls on FXO as follows:
<extension name="outgoing-fxo"> <condition field="destination_number" expression="^(43)$"> <action application="bridge" data="openzap/2/1/43"/> </condition> </extension>
<extension name="incoming-fxo"> <condition field="destination_number" expression="^(35)$"> <action application="bridge" data="openzap/1/1"/> </condition> </extension>
While Start-up Freeswitch following logs were seen:
2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 1 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 1 [fxs-channel]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1850 load_config() setting trunk type to 'FXS' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 1 as OpenZAP device 1:1 fd:31 2008-01-02 11:51:22 [DEBUG] zap_io.c:1770 load_config() found config for span 2008-01-02 11:51:22 [DEBUG] zap_io.c:1797 load_config() created span 2 of type zt 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [name]=[OpenZAP] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [number]=[1] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1810 load_config() span 2 [fxo-channel]=[4] 2008-01-02 11:51:22 [DEBUG] zap_io.c:1839 load_config() setting trunk type to 'FXO' start(KEWL) 2008-01-02 11:51:22 [INFO] zap_zt.c:168 zt_open_range() configuring device /dev/zap/channel channel 4 as OpenZAP device 2:1 fd:32 2008-01-02 11:51:22 [INFO] zap_io.c:1881 load_config() Configured 2 channel(s) 2008-01-02 11:51:22 [CONSOLE] switch_loadable_module.c:748 switch_loadable_module_load_file() Successfully Loaded [mod_openzap]
and while I made a call following logs were seen:
2008-01-02 12:04:16 [NOTICE] switch_core_state_machine.c:134 switch_core_standard_on_execute() Execute bridge(openzap/2/1/43)2008-01-02 12:04:16 [DEBUG] mod_openzap.c:231 tech_init() Set codec PCMU 20ms 2008-01-02 12:04:16 [NOTICE] switch_channel.c:392 switch_channel_set_name() New Chan OPENZAP/43 [e3630387-25d6-4031-bf81-239c3e64e3fa] 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:802 channel_outgoing_channel() OPENZAP/43 State Change CS_NEW -> CS_INIT 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OPENZAP/43 [BREAK] 2008-01-02 12:04:16 [ERR] zap_io.c:884 zap_channel_outgoing_call() outgoing_call method not implemented! 2008-01-02 12:04:16 [NOTICE] mod_openzap.c:818 channel_outgoing_channel() Close Channel OPENZAP/43 [CS_INIT] 2008-01-02 12:04:16 [ERR] switch_ivr_originate.c:525 switch_ivr_originate() Cannot Create Outgoing Channel! cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_ivr_originate.c:873 switch_ivr_originate() Originate Resulted in Error Cause: 27 [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [INFO] mod_dptools.c:1331 audio_bridge_function() Originate Failed. Cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [NOTICE] mod_dptools.c:1358 audio_bridge_function() Hangup OpenZAP/43 [CS_EXECUTE] [DESTINATION_OUT_OF_ORDER] 2008-01-02 12:04:16 [DEBUG] switch_channel.c:1071 switch_channel_perform_hangup() Kill OpenZAP/43 [KILL] 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:625 switch_core_session_signal_state_change() Kill OpenZAP/43 [BREAK] 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:394 switch_core_session_run() (OpenZAP/43) State HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:329 channel_on_hangup() Changing state on 1:1 from IDLE to HANGUP 2008-01-02 12:04:16 [DEBUG] mod_openzap.c:359 channel_on_hangup() OpenZAP/43 CHANNEL HANGUP 2008-01-02 12:04:16 [DEBUG] switch_core_state_machine.c:45 switch_core_standard_on_hangup() Standard HANGUP OpenZAP/43, cause: DESTINATION_OUT_OF_ORDER 2008-01-02 12:04:16 [DEBUG] switch_core_session.c:683 switch_core_session_thread() Session 1 (OpenZAP/43) Locked, Waiting on external entities 2008-01-02 12:04:16 [INFO] switch_core_session.c:689 switch_core_session_thread() Session 1 (OpenZAP/43) Ended 2008-01-02 12:04:16 [NOTICE] switch_core_session.c:691 switch_core_session_thread() Close Channel OpenZAP/43 [CS_HANGUP] 2008-01-02 12:04:16 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for HANGUP 2008-01-02 12:04:17 [DEBUG] zap_analog.c:290 zap_analog_channel_run() Changing state on 1:1 from HANGUP to BUSY 2008-01-02 12:04:17 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for BUSY 2008-01-02 12:04:20 [DEBUG] zap_analog.c:664 process_event() EVENT [ONHOOK][1:1] STATE [BUSY] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:690 process_event() Changing state on 1:1 from BUSY to DOWN 2008-01-02 12:04:20 [DEBUG] zap_analog.c:351 zap_analog_channel_run() Executing state handler on 1:1 for DOWN 2008-01-02 12:04:20 [DEBUG] mod_openzap.c:968 on_fxs_signal() got FXS sig [STOP] 2008-01-02 12:04:20 [DEBUG] zap_analog.c:648 zap_analog_channel_run() ANALOG CHANNEL thread ended.
Could anyone help me out in getting FXO working ???
Thanks in advance...
BR, Irshad.
------------------------------ Be a better friend, newshound, and know-it-all with Yahoo! Mobile. Try it now.<http://us.rd.yahoo.com/evt=51733/*http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ+>
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users
------------------------------ Looking for last minute shopping deals? Find them fast with Yahoo! Search.<http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/category.php?category=shopping>
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Anthony Minessale
-
Irshad Ahamed
-
Michael Jerris