mod_conference "volume in" setting
Hi, I am trying to figure out if the volume boost provided by the console command "volume in" can be set at conference profile level but I haven't found any leads yet. If this is not possible, can it be achieved by different means? Thank you -- Best Regards, Ciprian Dosoftei The information transmitted is intended only for the addressee and may contain privileged and/or confidential material. If you are not the intended recipient, kindly contact the sender and delete the message. Any disclosure, distribution or copying of this message is strictly prohibited without the expressed permission of the sender.
If everyone is too quiet, its an output gain issue on the far end device. In digital audio, there is no reason you would typically find that everyone is too quiet. What exactly is the call scenario that your finding this in? Mike On Sep 3, 2013, at 5:34 AM, Ciprian Dosoftei <ciprian.dosoftei@gmail.com> wrote:
Hi,
I am trying to figure out if the volume boost provided by the console command "volume in" can be set at conference profile level but I haven't found any leads yet.
If this is not possible, can it be achieved by different means?
Thanks Mike. Actually, it's not very consistent. It's a call center implementation, the agent is always fine but the other party is often quiet (roughly 50% of calls). All calls are delivered via the same SIP trunk so I am not sure where the issue is. I've tried various parameters in the console and "volume in 2" seems to work best. -Ciprian On 3 September 2013 13:24, Michael Jerris <mike@jerris.com> wrote:
If everyone is too quiet, its an output gain issue on the far end device. In digital audio, there is no reason you would typically find that everyone is too quiet. What exactly is the call scenario that your finding this in?
Mike
On Sep 3, 2013, at 5:34 AM, Ciprian Dosoftei <ciprian.dosoftei@gmail.com> wrote:
Hi,
I am trying to figure out if the volume boost provided by the console command "volume in" can be set at conference profile level but I haven't found any leads yet.
If this is not possible, can it be achieved by different means?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best Regards, Ciprian Dosoftei The information transmitted is intended only for the addressee and may contain privileged and/or confidential material. If you are not the intended recipient, kindly contact the sender and delete the message. Any disclosure, distribution or copying of this message is strictly prohibited without the expressed permission of the sender.
With conference, auto gain should solve this problem… On Sep 3, 2013, at 8:54 AM, Ciprian Dosoftei <ciprian.dosoftei@gmail.com> wrote:
Thanks Mike.
Actually, it's not very consistent. It's a call center implementation, the agent is always fine but the other party is often quiet (roughly 50% of calls). All calls are delivered via the same SIP trunk so I am not sure where the issue is. I've tried various parameters in the console and "volume in 2" seems to work best.
-Ciprian
On 3 September 2013 13:24, Michael Jerris <mike@jerris.com> wrote: If everyone is too quiet, its an output gain issue on the far end device. In digital audio, there is no reason you would typically find that everyone is too quiet. What exactly is the call scenario that your finding this in?
Mike
On Sep 3, 2013, at 5:34 AM, Ciprian Dosoftei <ciprian.dosoftei@gmail.com> wrote:
Hi,
I am trying to figure out if the volume boost provided by the console command "volume in" can be set at conference profile level but I haven't found any leads yet.
If this is not possible, can it be achieved by different means?
Thanks Mike -- I will turn on auto gain tonight and see how it will perform tomorrow. Thanks, Ciprian On 3 September 2013 14:07, Michael Jerris <mike@jerris.com> wrote:
With conference, auto gain should solve this problem…
On Sep 3, 2013, at 8:54 AM, Ciprian Dosoftei <ciprian.dosoftei@gmail.com> wrote:
Thanks Mike.
Actually, it's not very consistent. It's a call center implementation, the agent is always fine but the other party is often quiet (roughly 50% of calls). All calls are delivered via the same SIP trunk so I am not sure where the issue is. I've tried various parameters in the console and "volume in 2" seems to work best.
-Ciprian
On 3 September 2013 13:24, Michael Jerris <mike@jerris.com> wrote:
If everyone is too quiet, its an output gain issue on the far end device. In digital audio, there is no reason you would typically find that everyone is too quiet. What exactly is the call scenario that your finding this in?
Mike
On Sep 3, 2013, at 5:34 AM, Ciprian Dosoftei <ciprian.dosoftei@gmail.com> wrote:
Hi,
I am trying to figure out if the volume boost provided by the console command "volume in" can be set at conference profile level but I haven't found any leads yet.
If this is not possible, can it be achieved by different means?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Best Regards, Ciprian Dosoftei The information transmitted is intended only for the addressee and may contain privileged and/or confidential material. If you are not the intended recipient, kindly contact the sender and delete the message. Any disclosure, distribution or copying of this message is strictly prohibited without the expressed permission of the sender.
participants (2)
-
Ciprian Dosoftei
-
Michael Jerris