Hi. Here's what I'm trying to do. I want to play a sound if a certain condition is true. <extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension> The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me?
look at the log generated by calling this. What order do the dial plan apps show up? Does the playback show up? what do the logs show it doing when it executes that playback?
On Sep 22, 2016, at 1:06 PM, Caio Assis <caioebassis@hotmail.com> wrote:
Hi.
Here's what I'm trying to do. I want to play a sound if a certain condition is true.
<extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension>
The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me?
Actually, i might have figured it out. What I intend to do is an IVR-like application. Which means I want this to happen Call 1212 Application="read" gets my input if digit == 1 do this if digit == 2 do that Each option has it's own set of structions, so I think it should be within a condition. But I can't seem to validate the condition. Look at the following construction. <condition field="${dg}" expression="^0$"> <action application="playback" data="/home/beep.gsm"/> <anti-action application="playback" data="/home/audio.gsm"/> <action application="hangup"/> </condition> ${dg} is the variable that stores the input digit. So, if ${dg} == 0, play beep.gsm, else play audio.gsm. The expression is never true, but i put 0 always. Instead of playing beep.gsm, it plays audio.gsm. I got the same example from Freeswitch 1.2 book, Nested Conditions section. ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org> on behalf of Michael Jerris <mike@jerris.com> Sent: Thursday, September 22, 2016 6:57 PM To: FreeSWITCH Users Help Cc: comercial@ypytecnologia.com.br Subject: Re: [Freeswitch-users] Playback within condition look at the log generated by calling this. What order do the dial plan apps show up? Does the playback show up? what do the logs show it doing when it executes that playback? On Sep 22, 2016, at 1:06 PM, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Hi. Here's what I'm trying to do. I want to play a sound if a certain condition is true. <extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension> The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me?
Like said before you need to look into logs to figure it out or paste the console logs here. On 23 September 2016 at 22:18, Caio Assis <caioebassis@hotmail.com> wrote:
Actually, i might have figured it out. What I intend to do is an IVR-like application. Which means I want this to happen
Call 1212
Application="read" gets my input
if digit == 1 do this
if digit == 2 do that
Each option has it's own set of structions, so I think it should be within a condition. But I can't seem to validate the condition. Look at the following construction.
<condition field="${dg}" expression="^0$"> <action application="playback" data="/home/beep.gsm"/> <anti-action application="playback" data="/home/audio.gsm"/> <action application="hangup"/> </condition>
${dg} is the variable that stores the input digit. So, if ${dg} == 0, play beep.gsm, else play audio.gsm. The expression is never true, but i put 0 always. Instead of playing beep.gsm, it plays audio.gsm. I got the same example from Freeswitch 1.2 book, Nested Conditions section.
------------------------------ *From:* freeswitch-users-bounces@lists.freeswitch.org < freeswitch-users-bounces@lists.freeswitch.org> on behalf of Michael Jerris <mike@jerris.com> *Sent:* Thursday, September 22, 2016 6:57 PM *To:* FreeSWITCH Users Help *Cc:* comercial@ypytecnologia.com.br *Subject:* Re: [Freeswitch-users] Playback within condition
look at the log generated by calling this. What order do the dial plan apps show up? Does the playback show up? what do the logs show it doing when it executes that playback?
On Sep 22, 2016, at 1:06 PM, Caio Assis <caioebassis@hotmail.com> wrote:
Hi.
Here's what I'm trying to do. I want to play a sound if a certain condition is true.
<extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension>
The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Yeah without the console logs we are not going to be able to really help you. If you are trying to do your conditionals right after your play and get digits or read that is not going to work without transferring. Remember the dialplan has two steps, the evaluation period to figure out what to run, and then the execute phase where it executes the steps. If you create the variable during the execute phase you cannot use the variable further down in a conditional in the same execution because during the evaluation period it was null. This works when I test it. Maybe this will help you get on the right path to solving your issue. <extension name=”playthisfile”> <condition field="destination_number" expression="^playfilefortestcondition$"> <action application="play_and_get_digits" data="1 1 1 4000 # abc.wav invalid.wav testvar [1|2|0] 100 testcond XML public" /> <action application="transfer" data="testcond XML public" /> </condition> </extension> <extension name="testconditions"> <condition field="destination_number" expression="^testcond$"/> <condition field="${testvar}" expression="[0]" break="on-true"> <action application="log" data="CRIT Value was 0"/> <action application="playback" data="test.wav"/> <action application="hangup" data="NORMAL_CLEARING"/> </condition> <condition field="${testvar}" expression="[1]" break="on-true"> <action application="log" data="CRIT Value was NOT 0"/> <action application="playback" data="test.wav"/> <action application="hangup" data="NORMAL_CLEARING"/> </condition> </extension> Thanks, Branden Jordan From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Aqs Younas Sent: Friday, September 23, 2016 1:52 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Playback within condition Like said before you need to look into logs to figure it out or paste the console logs here. On 23 September 2016 at 22:18, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Actually, i might have figured it out. What I intend to do is an IVR-like application. Which means I want this to happen Call 1212 Application="read" gets my input if digit == 1 do this if digit == 2 do that Each option has it's own set of structions, so I think it should be within a condition. But I can't seem to validate the condition. Look at the following construction. <condition field="${dg}" expression="^0$"> <action application="playback" data="/home/beep.gsm"/> <anti-action application="playback" data="/home/audio.gsm"/> <action application="hangup"/> </condition> ${dg} is the variable that stores the input digit. So, if ${dg} == 0, play beep.gsm, else play audio.gsm. The expression is never true, but i put 0 always. Instead of playing beep.gsm, it plays audio.gsm. I got the same example from Freeswitch 1.2 book, Nested Conditions section. ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> on behalf of Michael Jerris <mike@jerris.com<mailto:mike@jerris.com>> Sent: Thursday, September 22, 2016 6:57 PM To: FreeSWITCH Users Help Cc: comercial@ypytecnologia.com.br<mailto:comercial@ypytecnologia.com.br> Subject: Re: [Freeswitch-users] Playback within condition look at the log generated by calling this. What order do the dial plan apps show up? Does the playback show up? what do the logs show it doing when it executes that playback? On Sep 22, 2016, at 1:06 PM, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Hi. Here's what I'm trying to do. I want to play a sound if a certain condition is true. <extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension> The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thank you for your help. The example you gave helped me a lot. I was able to do what I intended. Thanks a lot. ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org <freeswitch-users-bounces@lists.freeswitch.org> on behalf of Branden Jordan <BJordan@E-Teleco.com> Sent: Friday, September 23, 2016 6:28 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Playback within condition Yeah without the console logs we are not going to be able to really help you. If you are trying to do your conditionals right after your play and get digits or read that is not going to work without transferring. Remember the dialplan has two steps, the evaluation period to figure out what to run, and then the execute phase where it executes the steps. If you create the variable during the execute phase you cannot use the variable further down in a conditional in the same execution because during the evaluation period it was null. This works when I test it. Maybe this will help you get on the right path to solving your issue. <extension name=”playthisfile”> <condition field="destination_number" expression="^playfilefortestcondition$"> <action application="play_and_get_digits" data="1 1 1 4000 # abc.wav invalid.wav testvar [1|2|0] 100 testcond XML public" /> <action application="transfer" data="testcond XML public" /> </condition> </extension> <extension name="testconditions"> <condition field="destination_number" expression="^testcond$"/> <condition field="${testvar}" expression="[0]" break="on-true"> <action application="log" data="CRIT Value was 0"/> <action application="playback" data="test.wav"/> <action application="hangup" data="NORMAL_CLEARING"/> </condition> <condition field="${testvar}" expression="[1]" break="on-true"> <action application="log" data="CRIT Value was NOT 0"/> <action application="playback" data="test.wav"/> <action application="hangup" data="NORMAL_CLEARING"/> </condition> </extension> Thanks, Branden Jordan From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Aqs Younas Sent: Friday, September 23, 2016 1:52 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Playback within condition Like said before you need to look into logs to figure it out or paste the console logs here. On 23 September 2016 at 22:18, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Actually, i might have figured it out. What I intend to do is an IVR-like application. Which means I want this to happen Call 1212 Application="read" gets my input if digit == 1 do this if digit == 2 do that Each option has it's own set of structions, so I think it should be within a condition. But I can't seem to validate the condition. Look at the following construction. <condition field="${dg}" expression="^0$"> <action application="playback" data="/home/beep.gsm"/> <anti-action application="playback" data="/home/audio.gsm"/> <action application="hangup"/> </condition> ${dg} is the variable that stores the input digit. So, if ${dg} == 0, play beep.gsm, else play audio.gsm. The expression is never true, but i put 0 always. Instead of playing beep.gsm, it plays audio.gsm. I got the same example from Freeswitch 1.2 book, Nested Conditions section. ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> on behalf of Michael Jerris <mike@jerris.com<mailto:mike@jerris.com>> Sent: Thursday, September 22, 2016 6:57 PM To: FreeSWITCH Users Help Cc: comercial@ypytecnologia.com.br<mailto:comercial@ypytecnologia.com.br> Subject: Re: [Freeswitch-users] Playback within condition look at the log generated by calling this. What order do the dial plan apps show up? Does the playback show up? what do the logs show it doing when it executes that playback? On Sep 22, 2016, at 1:06 PM, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Hi. Here's what I'm trying to do. I want to play a sound if a certain condition is true. <extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension> The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Awesome glad to hear it helped! From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Caio Assis Sent: Tuesday, September 27, 2016 6:30 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Playback within condition Thank you for your help. The example you gave helped me a lot. I was able to do what I intended. Thanks a lot. ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> on behalf of Branden Jordan <BJordan@E-Teleco.com<mailto:BJordan@E-Teleco.com>> Sent: Friday, September 23, 2016 6:28 PM To: FreeSWITCH Users Help Subject: Re: [Freeswitch-users] Playback within condition Yeah without the console logs we are not going to be able to really help you. If you are trying to do your conditionals right after your play and get digits or read that is not going to work without transferring. Remember the dialplan has two steps, the evaluation period to figure out what to run, and then the execute phase where it executes the steps. If you create the variable during the execute phase you cannot use the variable further down in a conditional in the same execution because during the evaluation period it was null. This works when I test it. Maybe this will help you get on the right path to solving your issue. <extension name="playthisfile"> <condition field="destination_number" expression="^playfilefortestcondition$"> <action application="play_and_get_digits" data="1 1 1 4000 # abc.wav invalid.wav testvar [1|2|0] 100 testcond XML public" /> <action application="transfer" data="testcond XML public" /> </condition> </extension> <extension name="testconditions"> <condition field="destination_number" expression="^testcond$"/> <condition field="${testvar}" expression="[0]" break="on-true"> <action application="log" data="CRIT Value was 0"/> <action application="playback" data="test.wav"/> <action application="hangup" data="NORMAL_CLEARING"/> </condition> <condition field="${testvar}" expression="[1]" break="on-true"> <action application="log" data="CRIT Value was NOT 0"/> <action application="playback" data="test.wav"/> <action application="hangup" data="NORMAL_CLEARING"/> </condition> </extension> Thanks, Branden Jordan From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Aqs Younas Sent: Friday, September 23, 2016 1:52 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Subject: Re: [Freeswitch-users] Playback within condition Like said before you need to look into logs to figure it out or paste the console logs here. On 23 September 2016 at 22:18, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Actually, i might have figured it out. What I intend to do is an IVR-like application. Which means I want this to happen Call 1212 Application="read" gets my input if digit == 1 do this if digit == 2 do that Each option has it's own set of structions, so I think it should be within a condition. But I can't seem to validate the condition. Look at the following construction. <condition field="${dg}" expression="^0$"> <action application="playback" data="/home/beep.gsm"/> <anti-action application="playback" data="/home/audio.gsm"/> <action application="hangup"/> </condition> ${dg} is the variable that stores the input digit. So, if ${dg} == 0, play beep.gsm, else play audio.gsm. The expression is never true, but i put 0 always. Instead of playing beep.gsm, it plays audio.gsm. I got the same example from Freeswitch 1.2 book, Nested Conditions section. ________________________________ From: freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org> <freeswitch-users-bounces@lists.freeswitch.org<mailto:freeswitch-users-bounces@lists.freeswitch.org>> on behalf of Michael Jerris <mike@jerris.com<mailto:mike@jerris.com>> Sent: Thursday, September 22, 2016 6:57 PM To: FreeSWITCH Users Help Cc: comercial@ypytecnologia.com.br<mailto:comercial@ypytecnologia.com.br> Subject: Re: [Freeswitch-users] Playback within condition look at the log generated by calling this. What order do the dial plan apps show up? Does the playback show up? what do the logs show it doing when it executes that playback? On Sep 22, 2016, at 1:06 PM, Caio Assis <caioebassis@hotmail.com<mailto:caioebassis@hotmail.com>> wrote: Hi. Here's what I'm trying to do. I want to play a sound if a certain condition is true. <extension name="test"> <condition field="destination_number" expression="^1212$"> <condition field="${cond(${destination_number} == 1212 ? 1212 : 0000)}" expression="^1212$"> <!-- this second condition is just to ilustrate the nested condition--> <action application="log" data="INFO LOG"/> <action application="playback" data="sound1.gsm"/> </condition> <action application="playback" data="sound2.gsm"/> <action application="hangup"/> </condition> </extension> The sound 1 doesn't play, but I knew the condition was true because I can see the INFO LOG on the console. The sound 2, outside the condition, was played normally. Both PLAYBACK and READ applications don't work on nested conditions. Can anyone help me? _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
Aqs Younas
-
Branden Jordan
-
Caio Assis
-
Michael Jerris