Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
By "./compile" I was referring to "./configure" Vladimir -----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86 Thanks for the response(s): I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool. Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake': <snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip> This is the error when running '/opt/gnu/bin/make': <snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip> I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve. Vladimir -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86 This is not currently a supported platform, it only builds on 64 bit right now I think on solaris. Mike On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
I'll retst it later today and give you a link with instructions Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
Would truly appreciate that. Thanks Michal! -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86 I'll retst it later today and give you a link with instructions Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
Hi Michal, Just checking in to see if you've been able to take a stab at this. Thanks, Vladimir -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86 I'll retst it later today and give you a link with instructions Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
Hi Vladimir, Did you get an update on this at all? Thanks vmorales wrote:
Hi Michal,
Just checking in to see if you've been able to take a stab at this.
Thanks, Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
I'll retst it later today and give you a link with instructions
Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Sorry for the late reply, I was out of the office for the past two weeks. I'm not sure if there were updates over the mailing list (still catching up), but while I was out, one of our sys admins was able to get this compiled and has been verified to be functional on our Solaris 10/x86 server. Vladimir -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bruce McAlister Sent: Monday, August 24, 2009 4:59 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86 Hi Vladimir, Did you get an update on this at all? Thanks vmorales wrote:
Hi Michal,
Just checking in to see if you've been able to take a stab at this.
Thanks, Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
I'll retst it later today and give you a link with instructions
Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
rs
Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
Hi Vladimir, Would you mind letting us know what your sysadmin did to achieve a successful build? I am still having issues building freeswitch. Thanks Bruce vmorales wrote:
Sorry for the late reply, I was out of the office for the past two weeks. I'm not sure if there were updates over the mailing list (still catching up), but while I was out, one of our sys admins was able to get this compiled and has been verified to be functional on our Solaris 10/x86 server.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bruce McAlister Sent: Monday, August 24, 2009 4:59 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Hi Vladimir,
Did you get an update on this at all?
Thanks
vmorales wrote:
Hi Michal,
Just checking in to see if you've been able to take a stab at this.
Thanks, Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
I'll retst it later today and give you a link with instructions
Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
http://www.freeswitch.org Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Using Sun Studio and exporting the following flag: export CFLAGS="-lresolv" Is how our sysadmin was able to get FS to build. Vladimir -----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bruce McAlister Sent: Monday, August 31, 2009 12:49 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86 Hi Vladimir, Would you mind letting us know what your sysadmin did to achieve a successful build? I am still having issues building freeswitch. Thanks Bruce vmorales wrote:
Sorry for the late reply, I was out of the office for the past two weeks. I'm not sure if there were updates over the mailing list (still catching up), but while I was out, one of our sys admins was able to get this compiled and has been verified to be functional on our Solaris 10/x86 server.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bruce McAlister Sent: Monday, August 24, 2009 4:59 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Hi Vladimir,
Did you get an update on this at all?
Thanks
vmorales wrote:
Hi Michal,
Just checking in to see if you've been able to take a stab at this.
Thanks, Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
I'll retst it later today and give you a link with instructions
Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
rs
http://www.freeswitch.org Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
rs
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
What was the error building (which lib) ? We should probably push this in so configure supplies this to the build system Mike On Aug 31, 2009, at 1:16 PM, vmorales wrote:
Using Sun Studio and exporting the following flag:
export CFLAGS="-lresolv"
Is how our sysadmin was able to get FS to build.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bruce McAlister Sent: Monday, August 31, 2009 12:49 PM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Hi Vladimir,
Would you mind letting us know what your sysadmin did to achieve a successful build?
I am still having issues building freeswitch.
Thanks Bruce
vmorales wrote:
Sorry for the late reply, I was out of the office for the past two weeks. I'm not sure if there were updates over the mailing list (still catching up), but while I was out, one of our sys admins was able to get this compiled and has been verified to be functional on our Solaris 10/x86 server.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bruce McAlister Sent: Monday, August 24, 2009 4:59 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Hi Vladimir,
Did you get an update on this at all?
Thanks
vmorales wrote:
Hi Michal,
Just checking in to see if you've been able to take a stab at this.
Thanks, Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michal Bielicki Sent: Tuesday, August 11, 2009 5:33 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
I'll retst it later today and give you a link with instructions
Am 10.08.2009 um 20:14 schrieb vmorales:
By "./compile" I was referring to "./configure"
Vladimir
-----Original Message----- From: vmorales [mailto:email.list.subscriber@gmail.com] Sent: Monday, August 10, 2009 11:49 AM To: 'freeswitch-users@lists.freeswitch.org' Subject: RE: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
Thanks for the response(s):
I ran the "./compile" script with a set PREFIX. This took a few attempts with errors before it was able to complete error-free, as I had to install libtool.
Since then, I have tried running 'make', 'gmake', and '/opt/gnu/bin/make', but each results with an error. This is the error when running 'make' or 'gmake':
<snip> make: Fatal error: Command failed for target `all-recursive' Current working directory /home/vmorales/freeswitch-1.0.4 *** Error code 1 make: Fatal error: Command failed for target `all' </snip>
This is the error when running '/opt/gnu/bin/make':
<snip> make[5]: *** [mod_amr.so] Error 1 make[4]: *** [all] Error 1 make[3]: *** [mod_amr-all] Error 1 make[2]: *** [all-recursive] Error 1 Making all in build +-------- FreeSWITCH Build Complete -----------+ + FreeSWITCH has been successfully built. + + Install by running: + + + + /opt/gnu/bin/make install + +----------------------------------------------+ make[1]: *** [all-recursive] Error 1 make: *** [all] Error 2 </snip>
I re-untar'd before each compile/make attempt. Let me know if this is something that I can resolve.
Vladimir
-----Original Message----- From: freeswitch-users-bounces@lists.freeswitch.org [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Michael Jerris Sent: Saturday, August 08, 2009 12:37 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Freeswitch pre-compiled for Solaris 10/x86
This is not currently a supported platform, it only builds on 64 bit right now I think on solaris.
Mike
On Aug 6, 2009, at 6:03 PM, vmorales wrote:
Hello,
Does anyone have, or know where to get, a pre-compiled copy of FreeSwitch for Solaris 10/x86?
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
rs
http://www.freeswitch.org Michal Bielicki Leiter der Niederlassung HaloKwadrat Sp. z o.o. Niederlassung Kleinmachnow Eingetragen im Handelsregister beim Amtsgericht Potsdam, HRB21422P Ust.Id.: DE261885536 Geschaeftsfuehrer: Aleksander Wiercinski Meiereifeld 2b, 14532 Kleinmachnow t. +49 33203 263220 f. +49 33203 263229 sip. info@halokwadrat.de e. michal.bielicki@halokwadrat.de | w. www.halokwadrat.de Hauptgeschäftsstelle: Halo Kwadrat Sp. z o.o. ul. Polna 46/14 00-644 Warszawa, Polen EIngetragen im HRB Warszawa, KRS 0000153539
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
rs
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users
UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org
participants (4)
-
Bruce McAlister
-
Michael Jerris
-
Michal Bielicki
-
vmorales