Hi everyone I am trying to setup some pinned routing in freeswitch strictly through the xml dialplan, so not using any external scripts to validate pins, that being said i have written a sample dial plan below and it seems to fail, not sure why. The parts that are failing are actually detecting a valid pin was placed in as well as hanging up the phone call when more than 3 attempts have been made. can anyone please help me figure out why this is not working. <extension name="pinned_route_test" inline="true"> <condition field="destination_number" expression="^5555$"> <action application="answer"/> <action application="log" data="INFO Attempting to obtain pin"/> <action application="play_and_get_digits" data="4 10 3 3000 # conference\8000\conf-pin.wav silence_stream://250 inputted_validation_pin \d+"/> <action application="log" data="INFO Pin Number obtained ${inputted_validation_pin}."/> <action application="set" data="pin_attempts=${expr(${pin_attempts}+1)}"/> <action application="log" data="INFO # of pin attempts ${pin_attempts}."/> </condition> <condition field="inputted_validation_pin" expression="1234" break="on-true"> <action application="log" data="INFO Pin number entered was valid"/> <anti-action application="log" data="INFO 1234 is not a valid match for the inputted pin ${inputted_validation_pin}."/> </condition> <condition field="pin_attempts" expression="3"> <action application="playback" data="conference\8000\conf-goodbye.wav"/> <action application="hangup"/> <anti-action application="log" data="INFO invalid pin was inputted for attemp ${pin_attempts}."/> <anti-action application="playback" data="conference\8000\conf-bad-pin.wav"/> <anti-action application="log" data="INFO restarting extension pinned_route_test."/> <anti-action application="transfer" data="${destination_number} XML default"/> </condition> </extension>