running FS issue without make install
hi, this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu. firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever -- Regards, Bipin ------------------------------------------------------------------------
This might be easier: ./configure --prefix=/foobar/freeswitch make make install Then everything except for boot scripts in under /foobar/freeswitch And hopefully that will pick-up anything you missed. Robert Mundkowsky From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bipin Patel Sent: Thursday, July 6, 2017 11:40 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] running FS issue without make install hi, this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu. firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever -- Regards, Bipin ________________________________ ________________________________ This e-mail and any files transmitted with it may contain privileged or confidential information. It is solely for use by the individual for whom it is intended, even if addressed incorrectly. If you received this e-mail in error, please notify the sender; do not disclose, copy, distribute, or take any action in reliance on the contents of this information; and delete it from your system. Any other use of this e-mail is prohibited. Thank you for your compliance. ________________________________
Well I'm trying to avoid making and not so great in Linux I don't know what that configure command would do On July 6, 2017 11:51:26 PM "Mundkowsky, Robert" <rmundkowsky@ets.org> wrote:
This might be easier:
./configure --prefix=/foobar/freeswitch make make install
Then everything except for boot scripts in under /foobar/freeswitch
And hopefully that will pick-up anything you missed.
Robert Mundkowsky
From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bipin Patel Sent: Thursday, July 6, 2017 11:40 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: [Freeswitch-users] running FS issue without make install
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
-- Regards, Bipin
________________________________
________________________________
This e-mail and any files transmitted with it may contain privileged or confidential information. It is solely for use by the individual for whom it is intended, even if addressed incorrectly. If you received this e-mail in error, please notify the sender; do not disclose, copy, distribute, or take any action in reliance on the contents of this information; and delete it from your system. Any other use of this e-mail is prohibited.
Thank you for your compliance.
________________________________
---------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
If you have no reason to make (build from source) then do what Michael suggested and use apt-get (or yum) to install FreeSWITCH RPM (package). See https://freeswitch.org/confluence/display/FREESWITCH/Linux Robert Mundkowsky From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bipin Patel Sent: Thursday, July 6, 2017 4:44 PM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] running FS issue without make install Well I'm trying to avoid making and not so great in Linux I don't know what that configure command would do On July 6, 2017 11:51:26 PM "Mundkowsky, Robert" <rmundkowsky@ets.org<mailto:rmundkowsky@ets.org>> wrote: This might be easier: ./configure --prefix=/foobar/freeswitch make make install Then everything except for boot scripts in under /foobar/freeswitch And hopefully that will pick-up anything you missed. Robert Mundkowsky From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Bipin Patel Sent: Thursday, July 6, 2017 11:40 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org<mailto:freeswitch-users@lists.freeswitch.org>> Subject: [Freeswitch-users] running FS issue without make install hi, this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu. firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever -- Regards, Bipin ________________________________ ________________________________ This e-mail and any files transmitted with it may contain privileged or confidential information. It is solely for use by the individual for whom it is intended, even if addressed incorrectly. If you received this e-mail in error, please notify the sender; do not disclose, copy, distribute, or take any action in reliance on the contents of this information; and delete it from your system. Any other use of this e-mail is prohibited. Thank you for your compliance. ________________________________ _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org<mailto:consulting%40freeswitch.org> http://www.freeswitchsolutions.com<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freeswitchsolutions.com&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820472816&sdata=%2Ffgo522LNVvmSx066x442bK9h58dr4zT%2B6gN5daxzQI%3D&reserved=0> Official FreeSWITCH Sites http://www.freeswitch.org<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freeswitch.org&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820472816&sdata=1HWnBnEGMMFFEpUK%2FHWTNC3VxbOyeLXwBLNvPGvvXpU%3D&reserved=0> http://confluence.freeswitch.org<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fconfluence.freeswitch.org&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820482826&sdata=77qTp%2BSTCbE9qdGqHqUdRyZwfPQ%2FWDr62ecGcWfGeZI%3D&reserved=0> http://www.cluecon.com<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.cluecon.com&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820482826&sdata=2R%2BeeZDz65rOTbLU1SUOtW4A8P6P4BVS1liZIp%2BOO1E%3D&reserved=0> FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org<mailto:FreeSWITCH-users%40lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.freeswitch.org%2Fmailman%2Flistinfo%2Ffreeswitch-users&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820482826&sdata=Zw3kryb1LO6GHHgmfH1U%2BGvY%2BjMzjZB0g44z6jyJ1k4%3D&reserved=0> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Flists.freeswitch.org%2Fmailman%2Foptions%2Ffreeswitch-users&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820482826&sdata=ulZZxwjngXv9engj1NnZe3AcS4v7%2BgD82bv1XYCXDKQ%3D&reserved=0> http://www.freeswitch.org<https://na01.safelinks.protection.outlook.com/?url=http%3A%2F%2Fwww.freeswitch.org&data=02%7C01%7Crmundkowsky%40ets.org%7C1b1917debc0b44be76a408d4c4b04a2e%7C0ba6e9b760b34fae92f37e6ddd9e9b65%7C0%7C0%7C636349708820482826&sdata=Tmn92oDNDDyqA%2FqRMQXiDufkg1N4r5HtS9X4jWO4Wio%3D&reserved=0> ________________________________ This e-mail and any files transmitted with it may contain privileged or confidential information. It is solely for use by the individual for whom it is intended, even if addressed incorrectly. If you received this e-mail in error, please notify the sender; do not disclose, copy, distribute, or take any action in reliance on the contents of this information; and delete it from your system. Any other use of this e-mail is prohibited. Thank you for your compliance. ________________________________
I think make install does some things, so its bets to compile on all systems. Just in case you have some slight differences or something. On Thu, 06 Jul 2017 11:39:52 -0400, Bipin Patel wrote:
[1 <multipart/alternative (7bit)>] [1.1 <text/plain; windows-1252 (7bit)>] [1.2 <text/html; windows-1252 (7bit)>] hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
-- Regards, Bipin
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [2 <text/plain; utf-8 (base64)>] _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com
Hi, Well there is no variation in software or libraries between the two, we always run identical commands on both. It would be great if anyone can shed some more light on what make install does extra, like add any symbolic links etc or something different with gets missed out on manually copying over the files as I plan to span out multiple installs as quickly as I can rather than have to compile in each machine. Might as well document what I learn in the process as I have already noted down things I did so far and more over FS seems to run fine until it's trying to load mod dialplan xml, it gets the IP and also the wan IP and sets up the profile and codecs etc just fine so if it was some dependency stuff some error would have popped up. On July 6, 2017 9:02:28 PM John Covici <covici@ccs.covici.com> wrote:
I think make install does some things, so its bets to compile on all systems. Just in case you have some slight differences or something.
On Thu, 06 Jul 2017 11:39:52 -0400, Bipin Patel wrote:
[1 <multipart/alternative (7bit)>] [1.1 <text/plain; windows-1252 (7bit)>] [1.2 <text/html; windows-1252 (7bit)>] hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
-- Regards, Bipin
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- [2 <text/plain; utf-8 (base64)>] _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it?
John Covici covici@ccs.covici.com
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This is what packages are for.
On Jul 6, 2017, at 11:39 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
Yes I understand the importance of packages but that's fine for Debian installs and I have many small clients who would have less than 10 exts and in our testing giving them fs on raspbian is just fine and hardware like the raspberry pi works brilliant for calls, fax and most other basic things used in a PBX environment so if copying binary works fine on Debian my next task is to do the same on raspbian and I love to be on the bleeding edge of the latest code rather than use old packages which I guess for raspbian is a very old package of fs On July 7, 2017 12:53:25 AM Michael Jerris <mike@jerris.com> wrote:
This is what packages are for.
On Jul 6, 2017, at 11:39 AM, Bipin Patel <bipin@xbipin.com> wrote:
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
---------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
so build packages…
On Jul 6, 2017, at 5:05 PM, Bipin Patel <bipin@xbipin.com> wrote:
Yes I understand the importance of packages but that's fine for Debian installs and I have many small clients who would have less than 10 exts and in our testing giving them fs on raspbian is just fine and hardware like the raspberry pi works brilliant for calls, fax and most other basic things used in a PBX environment so if copying binary works fine on Debian my next task is to do the same on raspbian and I love to be on the bleeding edge of the latest code rather than use old packages which I guess for raspbian is a very old package of fs
On July 7, 2017 12:53:25 AM Michael Jerris <mike@jerris.com> wrote:
This is what packages are for.
On Jul 6, 2017, at 11:39 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting%40freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users%40lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Only if I knew how to I would but I don't. So I guess I won't be getting a answer to the main question or probably other users also don't know what make install does additional than copy binaries On July 7, 2017 1:10:34 AM Michael Jerris <mike@jerris.com> wrote:
so build packages…
On Jul 6, 2017, at 5:05 PM, Bipin Patel <bipin@xbipin.com> wrote:
Yes I understand the importance of packages but that's fine for Debian installs and I have many small clients who would have less than 10 exts and in our testing giving them fs on raspbian is just fine and hardware like the raspberry pi works brilliant for calls, fax and most other basic things used in a PBX environment so if copying binary works fine on Debian my next task is to do the same on raspbian and I love to be on the bleeding edge of the latest code rather than use old packages which I guess for raspbian is a very old package of fs
On July 7, 2017 12:53:25 AM Michael Jerris <mike@jerris.com> wrote:
This is what packages are for.
On Jul 6, 2017, at 11:39 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting%40freeswitch.org> http://www.freeswitchsolutions.com <http://www.freeswitchsolutions.com/>
Official FreeSWITCH Sites http://www.freeswitch.org <http://www.freeswitch.org/> http://confluence.freeswitch.org <http://confluence.freeswitch.org/> http://www.cluecon.com <http://www.cluecon.com/>
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users%40lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users <http://lists.freeswitch.org/mailman/listinfo/freeswitch-users> UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users <http://lists.freeswitch.org/mailman/options/freeswitch-users> http://www.freeswitch.org <http://www.freeswitch.org/>_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
---------- _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
On Fri, Jul 07, 2017 at 08:47:29AM +0400, Bipin Patel wrote:
Only if I knew how to I would but I don't.
So I guess I won't be getting a answer to the main question or probably other users also don't know what make install does additional than copy binaries
Hi Bipin, You could try out OpenWrt/LEDE. They have many target devices. There are also images for Raspberry Pi. Right now FS is only built for the trunk snapshots. But the next major release should include FS as well. For model 3 the target snapshot is here: https://downloads.lede-project.org/snapshots/targets/brcm2708/bcm2710/ The telephony packages for model 3 are here if you want to check whether all modules you need are included: https://downloads.lede-project.org/snapshots/packages/aarch64_cortex-a53_neo... Kind regards, Sebastian
On July 7, 2017 1:10:34 AM Michael Jerris <mike@jerris.com> wrote:
so build packages…
On Jul 6, 2017, at 5:05 PM, Bipin Patel <bipin@xbipin.com> wrote:
Yes I understand the importance of packages but that's fine for Debian installs and I have many small clients who would have less than 10 exts and in our testing giving them fs on raspbian is just fine and hardware like the raspberry pi works brilliant for calls, fax and most other basic things used in a PBX environment so if copying binary works fine on Debian my next task is to do the same on raspbian and I love to be on the bleeding edge of the latest code rather than use old packages which I guess for raspbian is a very old package of fs
On July 7, 2017 12:53:25 AM Michael Jerris <mike@jerris.com> wrote:
This is what packages are for.
On Jul 6, 2017, at 11:39 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
hi, thanks for that info, ill look into it, for now i managed to get it to work, the reason it was getting stuck was due to spandsp module, disabling that makes it run just fine without issue, next step is to figure out why spandsp wont load Regards, Bipin ------------------------------------------------------------------------ -------- Original Message -------- Subject: Re: [Freeswitch-users] running FS issue without make install From: Sebastian Kemper <sebastian_ml@gmx.net> To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Date: 7/7/2017, 10:17:39 AM
On Fri, Jul 07, 2017 at 08:47:29AM +0400, Bipin Patel wrote:
Only if I knew how to I would but I don't.
So I guess I won't be getting a answer to the main question or probably other users also don't know what make install does additional than copy binaries
Hi Bipin,
You could try out OpenWrt/LEDE. They have many target devices. There are also images for Raspberry Pi.
Right now FS is only built for the trunk snapshots. But the next major release should include FS as well.
For model 3 the target snapshot is here: https://downloads.lede-project.org/snapshots/targets/brcm2708/bcm2710/
The telephony packages for model 3 are here if you want to check whether all modules you need are included: https://downloads.lede-project.org/snapshots/packages/aarch64_cortex-a53_neo...
Kind regards, Sebastian
On July 7, 2017 1:10:34 AM Michael Jerris <mike@jerris.com> wrote:
so build packages…
On Jul 6, 2017, at 5:05 PM, Bipin Patel <bipin@xbipin.com> wrote:
Yes I understand the importance of packages but that's fine for Debian installs and I have many small clients who would have less than 10 exts and in our testing giving them fs on raspbian is just fine and hardware like the raspberry pi works brilliant for calls, fax and most other basic things used in a PBX environment so if copying binary works fine on Debian my next task is to do the same on raspbian and I love to be on the bleeding edge of the latest code rather than use old packages which I guess for raspbian is a very old package of fs
On July 7, 2017 12:53:25 AM Michael Jerris <mike@jerris.com> wrote:
This is what packages are for.
On Jul 6, 2017, at 11:39 AM, Bipin Patel <bipin@xbipin.com <mailto:bipin@xbipin.com>> wrote:
hi,
this might sound a basic question but would appreciate if any1 can guide me. I have 2 systems which are exactly same in software and hardware, both running debian with exact same packages and libraries installed. I git pull on one of them the latest FS master and compile it and then make install and everything works good, now to avoid compiling the same on the second machine, i just copy over the complete /usr/local/freeswitch to the second machine and just modify the profile to reflect its IP but when i run freeswitch i see it loading modules etc but it comes to the part loading mod_dialplan_xml and then its just stuck there forever and starts consuming 100% cpu.
firstly is it necessary to compile and make install on all systems and does make install do anything additional other than create the folders and copy the binaries? secondly how do i debug whats causing the issue when running FS coz there is no error shown, it just comes to that line and its stuck there for ever
participants (5)
-
Bipin Patel
-
John Covici
-
Michael Jerris
-
Mundkowsky, Robert
-
Sebastian Kemper