Michael, I tried to send yesterday but email was bounced back: I started the traces then called from an outside line, when the ringing got to the wav and stopped I picked up and got a dial tone, then hung up and ringing continued. I looked at the trace but do not know enough to see the problem. I thought to see 2 passes though the DP but it looks like more than that? Thank you. Mario Dialplan: http://pastebin.freeswitch.org/14439 Trace: http://pastebin.freeswitch.org/14440 On Nov 8, 2010, at 10:02 AM, Michael Collins wrote:

pastebin the XML for 2921 and 2922. Also, get a full debug log from start to finish and put it on pastebin. -MC

On Mon, Nov 8, 2010 at 9:39 AM, Mario G <mario_fs@mgtech.com> wrote: During early media the steps below work except the target stops ringing during step 3 and if the phone is picked up it does not answer the call, other extensions continue ringing. Is there a way to continue ringing the target while the wav is played to the caller so it can be answered? No luck on searching wiki and the few things I tried so far. Thanks, Mario G

1. I play 2 wav files 2. ring 17 seconds 3. play 2 wav files <- at this point the target phones stop ringing and cannot answer the call, after this point no problem. 4. set music on hold while bridging to cell phones.

step 1 <action application="set" data="ringback=${us-ring}"/ <action application="execute_extension" data="2921 XML default"/> <<<-play wav based on caller id,no ringing of target step 2 <action application="set" data="call_timeout=17"/> <action application="bridge" data="group/users1@${domain_name}"/> steps 3. <<<-play wav based on caller id, ringing stops and can't answer <action application="execute_extension" data="2922 XML default"/> <action application="playback" data="../mvsounds/we_trying_please_hold.wav"/> step 4. <<<-ringing starts agsin and can answer

<action application="set" data="ringback=$${hold_music}"/>

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Can you restate what you ate hoping to accomplish clear and concise? I'm lost. On Wed, Nov 10, 2010 at 3:02 PM, Mario G <mario_fs@mgtech.com> wrote:

Can anyone shed some light on this minor problem, or does it just work this way? Mario G On Nov 9, 2010, at 3:20 PM, Mario G wrote:

Michael, I tried to send yesterday but email was bounced back: I started the traces then called from an outside line, when the ringing got to the wav and stopped I picked up and got a dial tone, then hung up and ringing continued. I looked at the trace but do not know enough to see the problem. I thought to see 2 passes though the DP but it looks like more than that? Thank you. Mario Dialplan:   http://pastebin.freeswitch.org/14439 Trace:        http://pastebin.freeswitch.org/14440 On Nov 8, 2010, at 10:02 AM, Michael Collins wrote:

pastebin the XML for 2921 and 2922. Also, get a full debug log from start to finish and put it on pastebin. -MC

On Mon, Nov 8, 2010 at 9:39 AM, Mario G <mario_fs@mgtech.com> wrote:

...

During early media the steps below work except the target stops ringing during step 3 and if the phone is picked up it does not answer the call, other extensions continue ringing. Is there a way to continue ringing the target while the wav is played to the caller so it can be answered? No luck on searching wiki and the few things I tried so far. Thanks, Mario G 1. I play 2 wav files 2. ring 17 seconds 3.  play 2 wav files          <- at this point the target phones stop ringing and cannot answer the call, after this point no problem. 4. set music on hold while bridging to cell phones. step 1 <action application="set" data="ringback=${us-ring}"/ <action application="execute_extension" data="2921 XML default"/>  <<<-play wav based on caller id,no ringing of target step 2 <action application="set" data="call_timeout=17"/> <action application="bridge" data="group/users1@${domain_name}"/> steps 3. <<<-play wav based on caller id, ringing stops and can't answer <action application="execute_extension" data="2922 XML default"/>

<action application="playback" data="../mvsounds/we_trying_please_hold.wav"/> step 4. <<<-ringing starts agsin and can answer <action application="set" data="ringback=$${hold_music}"/>

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

Another way to put it: Diaplan http://pastebin.freeswitch.org/14439 works fine except for the few seconds the wav files play information the FS local extensions stop ringing and cannot be answered. When the wav is done ringing starts again. Is there any way to keep ringing through the wav so the call can be answered during the wav play? Thanks, Mario G On Nov 10, 2010, at 1:57 PM, Mario G wrote:

Is there a way to answer an incoming call (keep target ringing) during playback of a wav file during early media? When a call comes in part of the early media is a wav file. The target phones ring except during paying of the media file, if a phone tries to answer when ringing stops during the wav it cannot answer the call.

1. Someone calls from outside, 2. Phones ring. 3. In the middle of ringing we play a wav file. Phones stop ringing and can't be answered. <- this is the problem. 4. When wav is finished, phones start ringing again.

Thanks, Mario G

On Nov 10, 2010, at 1:18 PM, Anthony Minessale wrote:

...

Can you restate what you ate hoping to accomplish clear and concise? I'm lost.

On Wed, Nov 10, 2010 at 3:02 PM, Mario G <mario_fs@mgtech.com> wrote:

...

Can anyone shed some light on this minor problem, or does it just work this way? Mario G On Nov 9, 2010, at 3:20 PM, Mario G wrote:

Michael, I tried to send yesterday but email was bounced back: I started the traces then called from an outside line, when the ringing got to the wav and stopped I picked up and got a dial tone, then hung up and ringing continued. I looked at the trace but do not know enough to see the problem. I thought to see 2 passes though the DP but it looks like more than that? Thank you. Mario Dialplan: http://pastebin.freeswitch.org/14439 Trace: http://pastebin.freeswitch.org/14440 On Nov 8, 2010, at 10:02 AM, Michael Collins wrote:

pastebin the XML for 2921 and 2922. Also, get a full debug log from start to finish and put it on pastebin. -MC

On Mon, Nov 8, 2010 at 9:39 AM, Mario G <mario_fs@mgtech.com> wrote:

...

During early media the steps below work except the target stops ringing during step 3 and if the phone is picked up it does not answer the call, other extensions continue ringing. Is there a way to continue ringing the target while the wav is played to the caller so it can be answered? No luck on searching wiki and the few things I tried so far. Thanks, Mario G 1. I play 2 wav files 2. ring 17 seconds 3. play 2 wav files <- at this point the target phones stop ringing and cannot answer the call, after this point no problem. 4. set music on hold while bridging to cell phones. step 1 <action application="set" data="ringback=${us-ring}"/ <action application="execute_extension" data="2921 XML default"/> <<<-play wav based on caller id,no ringing of target step 2 <action application="set" data="call_timeout=17"/> <action application="bridge" data="group/users1@${domain_name}"/> steps 3. <<<-play wav based on caller id, ringing stops and can't answer <action application="execute_extension" data="2922 XML default"/>

<action application="playback" data="../mvsounds/we_trying_please_hold.wav"/> step 4. <<<-ringing starts agsin and can answer <action application="set" data="ringback=$${hold_music}"/>

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

Thanks that is easier and I will use it, but after a week of messing with this minor issue I just realized the problem is not that I am playing a file it is that the ringing stops because I am between two bridge commands at the time the file is played! Go figure... Thanks, Mario On Nov 10, 2010, at 3:28 PM, Anthony Minessale wrote:

skip all the crazy stuff and use mod_file_string

<action application="set" data="ringback=file_string:///path_to_please_wait.wav!local_stream://moh"/>

On Wed, Nov 10, 2010 at 4:19 PM, Mario G <mario_fs@mgtech.com> wrote:

...

Another way to put it: Diaplan http://pastebin.freeswitch.org/14439 works fine except for the few seconds the wav files play information the FS local extensions stop ringing and cannot be answered. When the wav is done ringing starts again. Is there any way to keep ringing through the wav so the call can be answered during the wav play? Thanks, Mario G

On Nov 10, 2010, at 1:57 PM, Mario G wrote:

Is there a way to answer an incoming call (keep target ringing) during playback of a wav file during early media? When a call comes in part of the early media is a wav file. The target phones ring except during paying of the media file, if a phone tries to answer when ringing stops during the wav it cannot answer the call. 1. Someone calls from outside, 2. Phones ring. 3. In the middle of ringing we play a wav file. Phones stop ringing and can't be answered. <- this is the problem. 4. When wav is finished, phones start ringing again. Thanks, Mario G On Nov 10, 2010, at 1:18 PM, Anthony Minessale wrote:

Can you restate what you ate hoping to accomplish clear and concise? I'm lost.

On Wed, Nov 10, 2010 at 3:02 PM, Mario G <mario_fs@mgtech.com> wrote:

Can anyone shed some light on this minor problem, or does it just work this

way? Mario G

On Nov 9, 2010, at 3:20 PM, Mario G wrote:

Michael, I tried to send yesterday but email was bounced back:

I started the traces then called from an outside line, when the ringing got

to the wav and stopped I picked up and got a dial tone, then hung up and

ringing continued. I looked at the trace but do not know enough to see the

problem. I thought to see 2 passes though the DP but it looks like more than

that? Thank you.

Mario

Dialplan: http://pastebin.freeswitch.org/14439

Trace: http://pastebin.freeswitch.org/14440

On Nov 8, 2010, at 10:02 AM, Michael Collins wrote:

pastebin the XML for 2921 and 2922. Also, get a full debug log from start to

finish and put it on pastebin.

-MC

On Mon, Nov 8, 2010 at 9:39 AM, Mario G <mario_fs@mgtech.com> wrote:

During early media the steps below work except the target stops ringing

during step 3 and if the phone is picked up it does not answer the call,

other extensions continue ringing. Is there a way to continue ringing the

target while the wav is played to the caller so it can be answered? No luck

on searching wiki and the few things I tried so far. Thanks, Mario G

1. I play 2 wav files

2. ring 17 seconds

3. play 2 wav files <- at this point the target phones stop

ringing and cannot answer the call, after this point no problem.

4. set music on hold while bridging to cell phones.

step 1

<action application="set" data="ringback=${us-ring}"/

<action application="execute_extension" data="2921 XML default"/>

<<<-play wav based on caller id,no ringing of target

step 2

<action application="set" data="call_timeout=17"/>

<action application="bridge" data="group/users1@${domain_name}"/>

steps 3. <<<-play wav based on caller id, ringing stops and can't answer

<action application="execute_extension" data="2922 XML default"/>

<action application="playback"

data="../mvsounds/we_trying_please_hold.wav"/>

step 4. <<<-ringing starts agsin and can answer

<action application="set" data="ringback=$${hold_music}"/>

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II

FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire

AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch

FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org