Registration Failed with status DNS Error [503[
This is probably a newbie problem, but I've been knocking my head over it for a few hours this morning, so I thought I'd ask for some help. I was running FreeSWITCH 1.2.7 on CentOS 5.8 (as a VM), and it was working fine. I upgraded to the latest FreeSWITCH 1.5.14b on CentOS 6.5. I still need to configure SELinux, so I turned that off for now. I also was suspecting the firewall, so I turned that off as well. I copied the configuration over, and the voicemail recordings, etc. Now we can receive calls, but we can't place external calls. We're using FlowRoute, and I'm getting this: 2014-09-24 13:37:42.695288 [NOTICE] sofia_reg.c:427 Registering flowroute 2014-09-24 13:37:42.695288 [ERR] sofia_reg.c:2292 flowroute Registration Failed with status DNS Error [503]. failure #2 2014-09-24 13:37:43.715285 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds. The DNS seems to resolve sip.flowroute.com just fine, when using ping. And incoming calls are working! Where should I look next? By the way, I can call the FreeSWITCH conference line, so it can DNS lookup conference.freeswitch.org just fine. -- Steve
More info: I figured out that I probably shouldn't be running a Beta version on a production system, so I finally found the instructions to get yum to work. (Those instructions, by the way, are not easy to find.) I then finally copied all the config files over to the proper location, and thought I had it working when I was able to place a call. But then, it happened again. Now sometimes I get this: 2014-09-24 17:06:54.615290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [908], setting retry to 30 seconds. and sometimes I get this: 2014-09-24 17:07:26.775290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds. The status page on Flowroute.com shows that I am registered. I'm now running version 1.4.8~64bit. -- Steve On Wed, Sep 24, 2014 at 1:43 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
This is probably a newbie problem, but I've been knocking my head over it for a few hours this morning, so I thought I'd ask for some help.
I was running FreeSWITCH 1.2.7 on CentOS 5.8 (as a VM), and it was working fine. I upgraded to the latest FreeSWITCH 1.5.14b on CentOS 6.5.
I still need to configure SELinux, so I turned that off for now. I also was suspecting the firewall, so I turned that off as well.
I copied the configuration over, and the voicemail recordings, etc. Now we can receive calls, but we can't place external calls. We're using FlowRoute, and I'm getting this:
2014-09-24 13:37:42.695288 [NOTICE] sofia_reg.c:427 Registering flowroute 2014-09-24 13:37:42.695288 [ERR] sofia_reg.c:2292 flowroute Registration Failed with status DNS Error [503]. failure #2 2014-09-24 13:37:43.715285 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The DNS seems to resolve sip.flowroute.com just fine, when using ping. And incoming calls are working! Where should I look next?
By the way, I can call the FreeSWITCH conference line, so it can DNS lookup conference.freeswitch.org just fine.
-- Steve
Check to see if the gateway is bound to to profiles. I have a suspicion that the gateway is bound to both ipv4 and ipv6 profiles. On Wed, Sep 24, 2014 at 8:13 PM, Steven Schoch < schoch+freeswitch.org@xwin32.com> wrote:
More info: I figured out that I probably shouldn't be running a Beta version on a production system, so I finally found the instructions to get yum to work. (Those instructions, by the way, are not easy to find.) I then finally copied all the config files over to the proper location, and thought I had it working when I was able to place a call. But then, it happened again. Now sometimes I get this: 2014-09-24 17:06:54.615290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [908], setting retry to 30 seconds. and sometimes I get this: 2014-09-24 17:07:26.775290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The status page on Flowroute.com shows that I am registered.
I'm now running version 1.4.8~64bit.
-- Steve
On Wed, Sep 24, 2014 at 1:43 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
This is probably a newbie problem, but I've been knocking my head over it for a few hours this morning, so I thought I'd ask for some help.
I was running FreeSWITCH 1.2.7 on CentOS 5.8 (as a VM), and it was working fine. I upgraded to the latest FreeSWITCH 1.5.14b on CentOS 6.5.
I still need to configure SELinux, so I turned that off for now. I also was suspecting the firewall, so I turned that off as well.
I copied the configuration over, and the voicemail recordings, etc. Now we can receive calls, but we can't place external calls. We're using FlowRoute, and I'm getting this:
2014-09-24 13:37:42.695288 [NOTICE] sofia_reg.c:427 Registering flowroute 2014-09-24 13:37:42.695288 [ERR] sofia_reg.c:2292 flowroute Registration Failed with status DNS Error [503]. failure #2 2014-09-24 13:37:43.715285 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The DNS seems to resolve sip.flowroute.com just fine, when using ping. And incoming calls are working! Where should I look next?
By the way, I can call the FreeSWITCH conference line, so it can DNS lookup conference.freeswitch.org just fine.
-- Steve
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
You mean like this? freeswitch@internal> sofia status Name Type Data State ================================================================================================= external-ipv6::flowroute gateway sip:xxxxxxxxxx@sip.flowroute.com TRYING (retry: 24s) external::flowroute gateway sip:xxxxxxxxxx@sip.flowroute.com FAIL_WAIT ================================================================================================= That's probably it. Let me see how I can fix that... -- Steve On Wed, Sep 24, 2014 at 5:17 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
Check to see if the gateway is bound to to profiles. I have a suspicion that the gateway is bound to both ipv4 and ipv6 profiles.
On Wed, Sep 24, 2014 at 8:13 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
More info: I figured out that I probably shouldn't be running a Beta version on a production system, so I finally found the instructions to get yum to work. (Those instructions, by the way, are not easy to find.) I then finally copied all the config files over to the proper location, and thought I had it working when I was able to place a call. But then, it happened again. Now sometimes I get this: 2014-09-24 17:06:54.615290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [908], setting retry to 30 seconds. and sometimes I get this: 2014-09-24 17:07:26.775290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The status page on Flowroute.com shows that I am registered.
I'm now running version 1.4.8~64bit.
-- Steve
On Wed, Sep 24, 2014 at 1:43 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
This is probably a newbie problem, but I've been knocking my head over it for a few hours this morning, so I thought I'd ask for some help.
I was running FreeSWITCH 1.2.7 on CentOS 5.8 (as a VM), and it was working fine. I upgraded to the latest FreeSWITCH 1.5.14b on CentOS 6.5.
I still need to configure SELinux, so I turned that off for now. I also was suspecting the firewall, so I turned that off as well.
I copied the configuration over, and the voicemail recordings, etc. Now we can receive calls, but we can't place external calls. We're using FlowRoute, and I'm getting this:
2014-09-24 13:37:42.695288 [NOTICE] sofia_reg.c:427 Registering flowroute 2014-09-24 13:37:42.695288 [ERR] sofia_reg.c:2292 flowroute Registration Failed with status DNS Error [503]. failure #2 2014-09-24 13:37:43.715285 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The DNS seems to resolve sip.flowroute.com just fine, when using ping. And incoming calls are working! Where should I look next?
By the way, I can call the FreeSWITCH conference line, so it can DNS lookup conference.freeswitch.org just fine.
-- Steve
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
edit the ipv6 profile to remove the gateway binding On Wed, Sep 24, 2014 at 8:26 PM, Steven Schoch < schoch+freeswitch.org@xwin32.com> wrote:
You mean like this?
freeswitch@internal> sofia status Name Type Data State
================================================================================================= external-ipv6::flowroute gateway sip:xxxxxxxxxx@sip.flowroute.com TRYING (retry: 24s) external::flowroute gateway sip:xxxxxxxxxx@sip.flowroute.com FAIL_WAIT
=================================================================================================
That's probably it. Let me see how I can fix that...
-- Steve
On Wed, Sep 24, 2014 at 5:17 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
Check to see if the gateway is bound to to profiles. I have a suspicion that the gateway is bound to both ipv4 and ipv6 profiles.
On Wed, Sep 24, 2014 at 8:13 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
More info: I figured out that I probably shouldn't be running a Beta version on a production system, so I finally found the instructions to get yum to work. (Those instructions, by the way, are not easy to find.) I then finally copied all the config files over to the proper location, and thought I had it working when I was able to place a call. But then, it happened again. Now sometimes I get this: 2014-09-24 17:06:54.615290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [908], setting retry to 30 seconds. and sometimes I get this: 2014-09-24 17:07:26.775290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The status page on Flowroute.com shows that I am registered.
I'm now running version 1.4.8~64bit.
-- Steve
On Wed, Sep 24, 2014 at 1:43 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
This is probably a newbie problem, but I've been knocking my head over it for a few hours this morning, so I thought I'd ask for some help.
I was running FreeSWITCH 1.2.7 on CentOS 5.8 (as a VM), and it was working fine. I upgraded to the latest FreeSWITCH 1.5.14b on CentOS 6.5.
I still need to configure SELinux, so I turned that off for now. I also was suspecting the firewall, so I turned that off as well.
I copied the configuration over, and the voicemail recordings, etc. Now we can receive calls, but we can't place external calls. We're using FlowRoute, and I'm getting this:
2014-09-24 13:37:42.695288 [NOTICE] sofia_reg.c:427 Registering flowroute 2014-09-24 13:37:42.695288 [ERR] sofia_reg.c:2292 flowroute Registration Failed with status DNS Error [503]. failure #2 2014-09-24 13:37:43.715285 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The DNS seems to resolve sip.flowroute.com just fine, when using
ping.
And incoming calls are working! Where should I look next?
By the way, I can call the FreeSWITCH conference line, so it can DNS lookup conference.freeswitch.org just fine.
-- Steve
Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I removed the file sip_profiles/external-ipv6.xml but that didn't make it go away. How do I get rid of the ipv6 profile? -- Steve On Wed, Sep 24, 2014 at 5:17 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
Check to see if the gateway is bound to to profiles. I have a suspicion that the gateway is bound to both ipv4 and ipv6 profiles.
restart freeswitch On Wed, Sep 24, 2014 at 8:32 PM, Steven Schoch < schoch+freeswitch.org@xwin32.com> wrote:
I removed the file sip_profiles/external-ipv6.xml but that didn't make it go away. How do I get rid of the ipv6 profile?
-- Steve
On Wed, Sep 24, 2014 at 5:17 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
Check to see if the gateway is bound to to profiles. I have a suspicion that the gateway is bound to both ipv4 and ipv6 profiles.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Do you rename the files to *.xml.saf and restart fs they should be gone. what is the full path to the profile that you deleted? what is the output of fs_cli -x "global_getvar"? On Wed, Sep 24, 2014 at 8:41 PM, Steven Schoch < schoch+freeswitch.org@xwin32.com> wrote:
I restarted, but the ipv6 profiles are still there.
-- Steve
On Wed, Sep 24, 2014 at 5:35 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
restart freeswitch
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This morning, after coming in refreshed, I find that I had removed the file from /usr/local/freeswitch/conf, while the current install is using /etc/freeswitch. After slapping my forehead with my palm, I have renamed the correct file and everything is working now. Thank you. -- Steve On Wed, Sep 24, 2014 at 6:01 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
Do you rename the files to *.xml.saf and restart fs they should be gone.
what is the full path to the profile that you deleted? what is the output of fs_cli -x "global_getvar"?
Glad its working now. Thanks for reporting back. On Thu, Sep 25, 2014 at 12:37 PM, Steven Schoch < schoch+freeswitch.org@xwin32.com> wrote:
This morning, after coming in refreshed, I find that I had removed the file from /usr/local/freeswitch/conf, while the current install is using /etc/freeswitch. After slapping my forehead with my palm, I have renamed the correct file and everything is working now. Thank you.
-- Steve
On Wed, Sep 24, 2014 at 6:01 PM, Russell Treleaven <rtreleaven@bunnykick.ca> wrote:
Do you rename the files to *.xml.saf and restart fs they should be gone.
what is the full path to the profile that you deleted? what is the output of fs_cli -x "global_getvar"?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I was getting some of the dns error, but I gave up and switched to ip authentication instead -- do you have astatic ip you can use? Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
More info: I figured out that I probably shouldn't be running a Beta version on a production system, so I finally found the instructions to get yum to work. (Those instructions, by the way, are not easy to find.) I then finally copied all the config files over to the proper location, and thought I had it working when I was able to place a call. But then, it happened again. Now sometimes I get this: 2014-09-24 17:06:54.615290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [908], setting retry to 30 seconds. and sometimes I get this: 2014-09-24 17:07:26.775290 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The status page on Flowroute.com shows that I am registered.
I'm now running version 1.4.8~64bit.
-- Steve
On Wed, Sep 24, 2014 at 1:43 PM, Steven Schoch <schoch+freeswitch.org@xwin32.com> wrote:
This is probably a newbie problem, but I've been knocking my head over it for a few hours this morning, so I thought I'd ask for some help.
I was running FreeSWITCH 1.2.7 on CentOS 5.8 (as a VM), and it was working fine. I upgraded to the latest FreeSWITCH 1.5.14b on CentOS 6.5.
I still need to configure SELinux, so I turned that off for now. I also was suspecting the firewall, so I turned that off as well.
I copied the configuration over, and the voicemail recordings, etc. Now we can receive calls, but we can't place external calls. We're using FlowRoute, and I'm getting this:
2014-09-24 13:37:42.695288 [NOTICE] sofia_reg.c:427 Registering flowroute 2014-09-24 13:37:42.695288 [ERR] sofia_reg.c:2292 flowroute Registration Failed with status DNS Error [503]. failure #2 2014-09-24 13:37:43.715285 [WARNING] sofia_reg.c:482 flowroute Failed Registration [503], setting retry to 30 seconds.
The DNS seems to resolve sip.flowroute.com just fine, when using ping. And incoming calls are working! Where should I look next?
By the way, I can call the FreeSWITCH conference line, so it can DNS lookup conference.freeswitch.org just fine.
-- Steve
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Your life is like a penny. You're going to lose it. The question is: How do you spend it? John Covici covici@ccs.covici.com
participants (3)
-
covici＠ccs.covici.com
-
Russell Treleaven
-
Steven Schoch