Cannot pass configure stage on ubuntu 11.10 build of master
I'm trying to build the master code base on ubuntu 11.10 to verify a bug I'm seeing on v1.2.stable. I've installed openssl 1.0.1f using the following: wget http://www.openssl.org/source/openssl-1.0.1f.tar.gz tar -zxvf openssl-1.0.1f.tar.gz cd openssl-1.0.1f ./config --prefix=/usr/openssl101f -fPIC make make install The build goes through successfully and the files are in /user/openssl101f. I then check out freeswitch from git: git clone git://git.freeswitch.org/freeswitch.git And then run bootstrap and configure: cd freeswitch ./bootstrap.sh -j ./configure CFLAGS="-I/usr/openssl101f/include" LDFLAGS="-L/usr/openssl101f/lib" At the end of configure I get: checking for tgetent in -ltinfo... yes checking for openssl... yes checking openssl_CFLAGS... checking openssl_LIBS... -lssl -lcrypto adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes checking for DTLSv1_method in -lssl... no configure: error: OpenSSL >= 1.0.1e and associaed developement headers required I'm not sure why freeswitch isnt picking up on my latest openssl build.
shared? On Feb 19, 2014, at 1:03 PM, Josh Nankin <jnankin@gmail.com> wrote:
I'm trying to build the master code base on ubuntu 11.10 to verify a bug I'm seeing on v1.2.stable.
I've installed openssl 1.0.1f using the following:
wget http://www.openssl.org/source/openssl-1.0.1f.tar.gz tar -zxvf openssl-1.0.1f.tar.gz cd openssl-1.0.1f ./config --prefix=/usr/openssl101f -fPIC make make install
The build goes through successfully and the files are in /user/openssl101f.
I then check out freeswitch from git:
git clone git://git.freeswitch.org/freeswitch.git
And then run bootstrap and configure: cd freeswitch ./bootstrap.sh -j ./configure CFLAGS="-I/usr/openssl101f/include" LDFLAGS="-L/usr/openssl101f/lib"
At the end of configure I get:
checking for tgetent in -ltinfo... yes checking for openssl... yes checking openssl_CFLAGS... checking openssl_LIBS... -lssl -lcrypto adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes checking for DTLSv1_method in -lssl... no configure: error: OpenSSL >= 1.0.1e and associaed developement headers required
I'm not sure why freeswitch isnt picking up on my latest openssl build.
I'm not sure I understand. I'm running as root on this test box so there should be no problem accessing the files. On Wed, Feb 19, 2014 at 12:15 PM, Michael Jerris <mike@jerris.com> wrote:
shared?
On Feb 19, 2014, at 1:03 PM, Josh Nankin <jnankin@gmail.com> wrote:
I'm trying to build the master code base on ubuntu 11.10 to verify a bug I'm seeing on v1.2.stable.
I've installed openssl 1.0.1f using the following:
wget http://www.openssl.org/source/openssl-1.0.1f.tar.gz tar -zxvf openssl-1.0.1f.tar.gz cd openssl-1.0.1f ./config --prefix=/usr/openssl101f -fPIC make make install
The build goes through successfully and the files are in /user/openssl101f.
I then check out freeswitch from git:
git clone git://git.freeswitch.org/freeswitch.git
And then run bootstrap and configure: cd freeswitch ./bootstrap.sh -j ./configure CFLAGS="-I/usr/openssl101f/include" LDFLAGS="-L/usr/openssl101f/lib"
At the end of configure I get:
checking for tgetent in -ltinfo... yes checking for openssl... yes checking openssl_CFLAGS... checking openssl_LIBS... -lssl -lcrypto adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes checking for DTLSv1_method in -lssl... no configure: error: OpenSSL >= 1.0.1e and associaed developement headers required
I'm not sure why freeswitch isnt picking up on my latest openssl build.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Now I get it. I was reading some other user posts, and realize you meant add "shared" to the ./configure step of the openssl build. Now I got past configure for freeswitch. Thanks, Josh On Wed, Feb 19, 2014 at 12:28 PM, Josh Nankin <jnankin@gmail.com> wrote:
I'm not sure I understand. I'm running as root on this test box so there should be no problem accessing the files.
On Wed, Feb 19, 2014 at 12:15 PM, Michael Jerris <mike@jerris.com> wrote:
shared?
On Feb 19, 2014, at 1:03 PM, Josh Nankin <jnankin@gmail.com> wrote:
I'm trying to build the master code base on ubuntu 11.10 to verify a bug I'm seeing on v1.2.stable.
I've installed openssl 1.0.1f using the following:
wget http://www.openssl.org/source/openssl-1.0.1f.tar.gz tar -zxvf openssl-1.0.1f.tar.gz cd openssl-1.0.1f ./config --prefix=/usr/openssl101f -fPIC make make install
The build goes through successfully and the files are in /user/openssl101f.
I then check out freeswitch from git:
git clone git://git.freeswitch.org/freeswitch.git
And then run bootstrap and configure: cd freeswitch ./bootstrap.sh -j ./configure CFLAGS="-I/usr/openssl101f/include" LDFLAGS="-L/usr/openssl101f/lib"
At the end of configure I get:
checking for tgetent in -ltinfo... yes checking for openssl... yes checking openssl_CFLAGS... checking openssl_LIBS... -lssl -lcrypto adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes checking for DTLSv1_method in -lssl... no configure: error: OpenSSL >= 1.0.1e and associaed developement headers required
I'm not sure why freeswitch isnt picking up on my latest openssl build.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Did you document these steps on the wiki or at the very least an email post to the list? /b On Thu, Feb 20, 2014 at 8:57 AM, Josh Nankin <jnankin@gmail.com> wrote:
Now I get it. I was reading some other user posts, and realize you meant add "shared" to the ./configure step of the openssl build. Now I got past configure for freeswitch.
Thanks, Josh
On Wed, Feb 19, 2014 at 12:28 PM, Josh Nankin <jnankin@gmail.com> wrote:
I'm not sure I understand. I'm running as root on this test box so there should be no problem accessing the files.
On Wed, Feb 19, 2014 at 12:15 PM, Michael Jerris <mike@jerris.com> wrote:
shared?
On Feb 19, 2014, at 1:03 PM, Josh Nankin <jnankin@gmail.com> wrote:
I'm trying to build the master code base on ubuntu 11.10 to verify a bug I'm seeing on v1.2.stable.
I've installed openssl 1.0.1f using the following:
wget http://www.openssl.org/source/openssl-1.0.1f.tar.gz tar -zxvf openssl-1.0.1f.tar.gz cd openssl-1.0.1f ./config --prefix=/usr/openssl101f -fPIC make make install
The build goes through successfully and the files are in /user/openssl101f.
I then check out freeswitch from git:
git clone git://git.freeswitch.org/freeswitch.git
And then run bootstrap and configure: cd freeswitch ./bootstrap.sh -j ./configure CFLAGS="-I/usr/openssl101f/include" LDFLAGS="-L/usr/openssl101f/lib"
At the end of configure I get:
checking for tgetent in -ltinfo... yes checking for openssl... yes checking openssl_CFLAGS... checking openssl_LIBS... -lssl -lcrypto adding "-DHAVE_OPENSSL" to SWITCH_AM_CFLAGS checking for SSL_CTX_set_tlsext_use_srtp in -lssl... yes checking for DTLSv1_method in -lssl... no configure: error: OpenSSL >= 1.0.1e and associaed developement headers required
I'm not sure why freeswitch isnt picking up on my latest openssl build.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
FreeSWITCH-powered IP PBX: The CudaTel Communication Server http://www.cudatel.com
Official FreeSWITCH Sites http://www.freeswitch.org http://wiki.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (3)
-
Brian West
-
Josh Nankin
-
Michael Jerris