I found out that this "Address already in use" message came because I had put this in sofia.conf.xml, in addition to the profile which already was there. Apparently that is a bad thing to do. <profile name="sip"> <settings> <param name="debug" value="1"/> <param name="rfc2833-pt" value="101"/> <param name="sip-port" value="5060"/> <param name="dialplan" value="XML"/> <param name="dtmf-duration" value="100"/> <param name="codec-prefs" value="$${default_codecs}"/> <param name="codec-ms" value="20"/> <param name="use-rtp-timer" value="true"/> <param name="rtp-timer-name" value="soft"/> <param name="rtp-ip" value="auto"/> <param name="sip-ip" value="auto"/> </settings> </profile> Den 8. apr. 2007 kl. 13.12 skrev Ivan C Myrvold:

I have problems getting a PAP2 device with two analog phones to call each other with freeswitch. I wonder if this from the freeswitch startup output is the cause of it:

... nta: bind(192.168.207.101:5060;transport=*): Address already in use nua: initializing SIP stack failed ...

I am wondering why I get this. I just did a reboot, started freeswitch, and get the same two lines in the startup output of freeswitch.

192.168.207.101 is the IP address of the freeswitch server, running on a MacBook Pro. Latest freeswitch from svn is installed.

Ivan

_______________________________________________ Freeswitch-users mailing list Freeswitch-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch- users http://www.freeswitch.org