I apologize for including an except of the log here, but in troubleshooting this I noticed there is a slightly more than 50 second delay between the time the channel is hung up and the time the NOTIFY is sent to the phone. Anyone have any ideas as to why this isn't sent when the channel is hung up? If need be I can pastebin complete logs but there is a lot to sift through. 2011-10-11 21:01:51.446883 [NOTICE] switch_ivr_bridge.c:658 Hangup sofia/external/18004359792 [CS_EXCHANGE_MEDIA] [NORMAL_CLEARING] 2011-10-11 21:02:41.760065 [WARNING] sofia_presence.c:1834 send payload: <?xml version="1.0"?> <dialog-info xmlns="urn:ietf:params:xml:ns:dialog-info" version="246" state="partial" entity="sip:2001@206.125.40.179"> </dialog-info> On Oct 11, 2011, at 12:47 PM, Spencer Thomason wrote:

Hello all, I have several Cisco SPA509G phones, most without the SPA500 expansion module, but a few with. I'm having trouble getting the BLFs to work reliably. Specifically when a user hangs up the BLF continues to show them on the phone. Currently the server type is set to RFC3265_4235. The phones have the option for Asterisk, Broadsoft, and Sylantro as well. What's the difference? The phones are all running firmware v 7.4.9a. Freeswitch is on a public ip and all of the phones are behind NAT, but all other signaling is working very reliably. Any help would be greatly appreciated!

Thanks, Spencer

FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org