Is there an expected date when Freeswitch 1.8/Debian 9 will become the preferred production configuration?
BTW, I run a Debian 8 in a privileged LXC container on a Debian 9 host, and FreeSWITCH is running fine. The container has its own physical NIC, and is used as a voice quality testing probe. Because the container has full privileges (the default in Debian), FreeSWITCH daemon gets the necessary realtime priority in the host kernel. I was also monitoring the quality of outbound RTP stream, and the best results are achieved with "timerfd" RTP timer in the SIP profile. The default "soft" timer resulted in sporadic RTP delays in some calls. On Sat, Feb 3, 2018 at 11:40 PM, William Colls <william@williamcollsassoc.ca> wrote:
Is there an expected date when Freeswitch 1.8/Debian 9 will become the preferred production configuration?
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
There are some known issues with Debian 9 and how its handled the openssl upgrade that we are still working through to confirm what exactly needs to get done to fix it. The problem is, a bunch of system libs were not ready for the new openssl when deb9 was locked down, so they took a half way there approach and its caused issues where multiple versions of openssl end up in the same process, and we expect that this may cause some issues. I expect this to take a little while to verify completely.
On Feb 3, 2018, at 5:40 PM, William Colls <william@williamcollsassoc.ca> wrote:
Is there an expected date when Freeswitch 1.8/Debian 9 will become the preferred production configuration?
I too am interested in compiling fs for debian 9;
From here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie running this command (one line): wget -O - https://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add - ends with this error: Cannot write to ‘-’ (Broken pipe). but running this command (one line): wget -O - https://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | sudo apt-key add - seems ok, BUT, then running this command: git clone https://freeswitch.org/stash/scm/fs/freeswitch.git freeswitch.gits produces this error: Cloning into 'freeswitch.gits'... fatal: unable to access 'https://freeswitch.org/stash/scm/fs/freeswitch.git/': gnutls_handshake() failed: Public key signature verification has failed. So there is some tls problem which "should" be simple to solve... for someone who knows how :) So this would be my first question - how to fix this error. My second question is what environment do folks normally use for development? E.g. debian sid/unstable? (my apologies if this should go to the dev list, I have applied to join, a few days ago, just waiting to be approved...) On Mon, Feb 05, 2018 at 11:13:00AM -0500, Michael Jerris wrote:
There are some known issues with Debian 9 and how its handled the openssl upgrade that we are still working through to confirm what exactly needs to get done to fix it. The problem is, a bunch of system libs were not ready for the new openssl when deb9 was locked down, so they took a half way there approach and its caused issues where multiple versions of openssl end up in the same process, and we expect that this may cause some issues. I expect this to take a little while to verify completely.
On Feb 3, 2018, at 5:40 PM, William Colls <william at williamcollsassoc.ca> wrote:
Is there an expected date when Freeswitch 1.8/Debian 9 will become the preferred production configuration?
On Jun 30, 2018, at 7:59 AM, Zenaan Harkness <zen@freedbms.net> wrote:
I too am interested in compiling fs for debian 9;
As I said, there is still no public way to do this. Still working out all the issues, will happen at some point in the future.
From here:
https://freeswitch.org/confluence/display/FREESWITCH/Debian+8+Jessie
running this command (one line):
wget -O - https://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | apt-key add -
ends with this error:
Cannot write to ‘-’ (Broken pipe).
but running this command (one line):
wget -O - https://files.freeswitch.org/repo/deb/debian/freeswitch_archive_g0.pub | sudo apt-key add -
seems ok,
You should be able to follow the instructions on confluence for all this
BUT, then running this command:
git clone https://freeswitch.org/stash/scm/fs/freeswitch.git freeswitch.gits
produces this error:
Cloning into 'freeswitch.gits'... fatal: unable to access 'https://freeswitch.org/stash/scm/fs/freeswitch.git/': gnutls_handshake() failed: Public key signature verification has failed. \
Sounds like some issue on your system, i’venever seen this before
So there is some tls problem which "should" be simple to solve... for someone who knows how :) So this would be my first question - how to fix this error.
My second question is what environment do folks normally use for development? E.g. debian sid/unstable?
We dev on deb 8 moving towards deb9
(my apologies if this should go to the dev list, I have applied to join, a few days ago, just waiting to be approved...)
On Mon, Feb 05, 2018 at 11:13:00AM -0500, Michael Jerris wrote:
There are some known issues with Debian 9 and how its handled the openssl upgrade that we are still working through to confirm what exactly needs to get done to fix it. The problem is, a bunch of system libs were not ready for the new openssl when deb9 was locked down, so they took a half way there approach and its caused issues where multiple versions of openssl end up in the same process, and we expect that this may cause some issues. I expect this to take a little while to verify completely.
On Feb 3, 2018, at 5:40 PM, William Colls <william at williamcollsassoc.ca> wrote:
Is there an expected date when Freeswitch 1.8/Debian 9 will become the preferred production configuration?
participants (4)
-
Michael Jerris
-
Stanislav Sinyagin
-
William Colls
-
Zenaan Harkness