We are using FS 1.0 (svn 17188) with Libpri/dahdi/openzap on Sangoma T-1 card. When a call comes in on the PRI the Calling Number is shown twice on the phone. Both where the number should be and also in place of the Calling Party Name. Call completes and talks just fine. A PRI trace on the FS box shows that the name is being received from the provider in the facility message. Running the "Info" command in the dialplan shows both caller_id_number and caller_id_name containing the Callers phone number. Should Caller-ID Name and Number be shown by default or is there a setting that needs to be made to show the Name on the phone? Thanks
the libpri module for openzap may not be getting the info from the correct field? you would have to have a look in the code. On Mon, May 3, 2010 at 4:39 PM, Doug Albrechtsen <douga@cachecomm.com>wrote:
We are using FS 1.0 (svn 17188) with Libpri/dahdi/openzap on Sangoma T-1 card.
When a call comes in on the PRI the Calling Number is shown twice on the phone. Both where the number should be and also in place of the Calling Party Name. Call completes and talks just fine.
A PRI trace on the FS box shows that the name is being received from the provider in the facility message. Running the "Info" command in the dialplan shows both caller_id_number and caller_id_name containing the Callers phone number.
Should Caller-ID Name and Number be shown by default or is there a setting that needs to be made to show the Name on the phone?
Thanks
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Apparently this is an unusual driver configuration we are using...otherwise someone certainly would have dealt with it previously. We are using this config as directed by Sangoma to use their B601DE Hybrid Board...and to get the 2B Channel Transfer Feature..otherwise we would be more mainstream on this....sorry. I have opened openzap_libpri.c..doesn't seem to be the right spot to be looking. Could you give me a little more direction on how to go about troubleshooting and resolving this problem? Thanks for your help...FS is awesome! Anthony Minessale wrote:
the libpri module for openzap may not be getting the info from the correct field? you would have to have a look in the code.
On Mon, May 3, 2010 at 4:39 PM, Doug Albrechtsen <douga@cachecomm.com <mailto:douga@cachecomm.com>> wrote:
We are using FS 1.0 (svn 17188) with Libpri/dahdi/openzap on Sangoma T-1 card.
When a call comes in on the PRI the Calling Number is shown twice on the phone. Both where the number should be and also in place of the Calling Party Name. Call completes and talks just fine.
A PRI trace on the FS box shows that the name is being received from the provider in the facility message. Running the "Info" command in the dialplan shows both caller_id_number and caller_id_name containing the Callers phone number.
Should Caller-ID Name and Number be shown by default or is there a setting that needs to be made to show the Name on the phone?
Thanks
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900 ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Since you are using FS you may want to use the sangoma supported PRI stack that comes with the driver as described on their wiki, then they will probably be even more willing to help you since it's their code you would be using and they support it very well. On Tue, May 4, 2010 at 11:13 AM, Doug Albrechtsen <douga@cachecomm.com>wrote:
Apparently this is an unusual driver configuration we are using...otherwise someone certainly would have dealt with it previously. We are using this config as directed by Sangoma to use their B601DE Hybrid Board...and to get the 2B Channel Transfer Feature..otherwise we would be more mainstream on this....sorry.
I have opened openzap_libpri.c..doesn't seem to be the right spot to be looking.
Could you give me a little more direction on how to go about troubleshooting and resolving this problem?
Thanks for your help...FS is awesome!
Anthony Minessale wrote:
the libpri module for openzap may not be getting the info from the correct field? you would have to have a look in the code.
On Mon, May 3, 2010 at 4:39 PM, Doug Albrechtsen <douga@cachecomm.com <mailto:douga@cachecomm.com>> wrote:
We are using FS 1.0 (svn 17188) with Libpri/dahdi/openzap on Sangoma T-1 card.
When a call comes in on the PRI the Calling Number is shown twice on the phone. Both where the number should be and also in place of the Calling Party Name. Call completes and talks just fine.
A PRI trace on the FS box shows that the name is being received from the provider in the facility message. Running the "Info" command in the dialplan shows both caller_id_number and caller_id_name containing the Callers phone number.
Should Caller-ID Name and Number be shown by default or is there a setting that needs to be made to show the Name on the phone?
Thanks
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> <mailto:MSN%3Aanthony_minessale@hotmail.com<MSN%253Aanthony_minessale@hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> <mailto:PAYPAL%3Aanthony.minessale@gmail.com<PAYPAL%253Aanthony.minessale@gmail.com>
IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> <mailto:sip%3A888@conference.freeswitch.org<sip%253A888@conference.freeswitch.org>
googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org<googletalk%253Aconf%252B888@conference.freeswitch.org>
pstn:+19193869900 ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
Unfortunately, according to Sangoma, we cannot use their PRI stack and get the 2B Channel Transfer to work. It will be supported in a future version of their new driver...thus we use this workaround. Could you direct me to a particular source file(s) where this name assignment should happen? Thanks Anthony Minessale wrote:
Since you are using FS you may want to use the sangoma supported PRI stack that comes with the driver as described on their wiki, then they will probably be even more willing to help you since it's their code you would be using and they support it very well.
On Tue, May 4, 2010 at 11:13 AM, Doug Albrechtsen <douga@cachecomm.com <mailto:douga@cachecomm.com>> wrote:
Apparently this is an unusual driver configuration we are using...otherwise someone certainly would have dealt with it previously. We are using this config as directed by Sangoma to use their B601DE Hybrid Board...and to get the 2B Channel Transfer Feature..otherwise we would be more mainstream on this....sorry.
I have opened openzap_libpri.c..doesn't seem to be the right spot to be looking.
Could you give me a little more direction on how to go about troubleshooting and resolving this problem?
Thanks for your help...FS is awesome!
Anthony Minessale wrote: > the libpri module for openzap may not be getting the info from the > correct field? > you would have to have a look in the code. > > > On Mon, May 3, 2010 at 4:39 PM, Doug Albrechtsen <douga@cachecomm.com <mailto:douga@cachecomm.com> > <mailto:douga@cachecomm.com <mailto:douga@cachecomm.com>>> wrote: > > We are using FS 1.0 (svn 17188) with Libpri/dahdi/openzap on > Sangoma T-1 > card. > > When a call comes in on the PRI the Calling Number is shown twice > on the > phone. Both where the number should be and also in place of the > Calling > Party Name. Call completes and talks just fine. > > A PRI trace on the FS box shows that the name is being received > from the > provider in the facility message. > Running the "Info" command in the dialplan shows both caller_id_number > and caller_id_name containing the Callers phone number. > > Should Caller-ID Name and Number be shown by default or is there a > setting that needs to be made to show the Name on the phone? > > Thanks > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org > > > > > -- > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > Twitter: http://twitter.com/FreeSWITCH_wire > > AIM: anthm > MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> > <mailto:MSN%3Aanthony_minessale@hotmail.com <mailto:MSN%253Aanthony_minessale@hotmail.com>> > GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> > <mailto:PAYPAL%3Aanthony.minessale@gmail.com <mailto:PAYPAL%253Aanthony.minessale@gmail.com>> > IRC: irc.freenode.net <http://irc.freenode.net> <http://irc.freenode.net> #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> > <mailto:sip%3A888@conference.freeswitch.org <mailto:sip%253A888@conference.freeswitch.org>> > googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> > <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org <mailto:googletalk%253Aconf%252B888@conference.freeswitch.org>> > pstn:+19193869900 > ------------------------------------------------------------------------ > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <mailto:MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com <mailto:PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <mailto:sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900 ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
libs/openzap/src/ozmod/ozmod_libpri/ozmod_libpri.c line 776 On Tue, May 4, 2010 at 1:04 PM, Doug Albrechtsen <douga@cachecomm.com>wrote:
Unfortunately, according to Sangoma, we cannot use their PRI stack and get the 2B Channel Transfer to work. It will be supported in a future version of their new driver...thus we use this workaround. Could you direct me to a particular source file(s) where this name assignment should happen?
Thanks
Anthony Minessale wrote:
Since you are using FS you may want to use the sangoma supported PRI stack that comes with the driver as described on their wiki, then they will probably be even more willing to help you since it's their code you would be using and they support it very well.
On Tue, May 4, 2010 at 11:13 AM, Doug Albrechtsen <douga@cachecomm.com <mailto:douga@cachecomm.com>> wrote:
Apparently this is an unusual driver configuration we are using...otherwise someone certainly would have dealt with it previously. We are using this config as directed by Sangoma to use their B601DE Hybrid Board...and to get the 2B Channel Transfer Feature..otherwise we would be more mainstream on this....sorry.
I have opened openzap_libpri.c..doesn't seem to be the right spot to be looking.
Could you give me a little more direction on how to go about troubleshooting and resolving this problem?
Thanks for your help...FS is awesome!
Anthony Minessale wrote: > the libpri module for openzap may not be getting the info from the > correct field? > you would have to have a look in the code. > > > On Mon, May 3, 2010 at 4:39 PM, Doug Albrechtsen <douga@cachecomm.com <mailto:douga@cachecomm.com> > <mailto:douga@cachecomm.com <mailto:douga@cachecomm.com>>> wrote: > > We are using FS 1.0 (svn 17188) with Libpri/dahdi/openzap on > Sangoma T-1 > card. > > When a call comes in on the PRI the Calling Number is shown twice > on the > phone. Both where the number should be and also in place of
the
> Calling > Party Name. Call completes and talks just fine. > > A PRI trace on the FS box shows that the name is being received > from the > provider in the facility message. > Running the "Info" command in the dialplan shows both caller_id_number > and caller_id_name containing the Callers phone number. > > Should Caller-ID Name and Number be shown by default or is there a > setting that needs to be made to show the Name on the phone? > > Thanks > > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > <mailto:FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org>> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
> http://www.freeswitch.org > > > > > -- > Anthony Minessale II > > FreeSWITCH http://www.freeswitch.org/ > ClueCon http://www.cluecon.com/ > Twitter: http://twitter.com/FreeSWITCH_wire > > AIM: anthm > MSN:anthony_minessale@hotmail.com<MSN%3Aanthony_minessale@hotmail.com> <mailto:MSN%3Aanthony_minessale@hotmail.com<MSN%253Aanthony_minessale@hotmail.com>
> <mailto:MSN%3Aanthony_minessale@hotmail.com<MSN%253Aanthony_minessale@hotmail.com> <mailto:MSN%253Aanthony_minessale@hotmail.com<MSN%25253Aanthony_minessale@hotmail.com>
> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> <mailto:PAYPAL%3Aanthony.minessale@gmail.com<PAYPAL%253Aanthony.minessale@gmail.com>
> <mailto:PAYPAL%3Aanthony.minessale@gmail.com<PAYPAL%253Aanthony.minessale@gmail.com> <mailto:PAYPAL%253Aanthony.minessale@gmail.com<PAYPAL%25253Aanthony.minessale@gmail.com>
> IRC: irc.freenode.net <http://irc.freenode.net> <http://irc.freenode.net> #freeswitch > > FreeSWITCH Developer Conference > sip:888@conference.freeswitch.org<sip%3A888@conference.freeswitch.org> <mailto:sip%3A888@conference.freeswitch.org<sip%253A888@conference.freeswitch.org>
> <mailto:sip%3A888@conference.freeswitch.org<sip%253A888@conference.freeswitch.org> <mailto:sip%253A888@conference.freeswitch.org<sip%25253A888@conference.freeswitch.org>
> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org<googletalk%253Aconf%252B888@conference.freeswitch.org>
> <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org<googletalk%253Aconf%252B888@conference.freeswitch.org> <mailto:googletalk%253Aconf%252B888@conference.freeswitch.org<googletalk%25253Aconf%25252B888@conference.freeswitch.org>
> pstn:+19193869900 >
------------------------------------------------------------------------
> > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:
http://lists.freeswitch.org/mailman/options/freeswitch-users
-- Anthony Minessale II
FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire
AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> <mailto:MSN%3Aanthony_minessale@hotmail.com<MSN%253Aanthony_minessale@hotmail.com>
GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> <mailto:PAYPAL%3Aanthony.minessale@gmail.com<PAYPAL%253Aanthony.minessale@gmail.com>
IRC: irc.freenode.net <http://irc.freenode.net> #freeswitch
FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> <mailto:sip%3A888@conference.freeswitch.org<sip%253A888@conference.freeswitch.org>
googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> <mailto:googletalk%3Aconf%2B888@conference.freeswitch.org<googletalk%253Aconf%252B888@conference.freeswitch.org>
pstn:+19193869900 ------------------------------------------------------------------------
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com <MSN%3Aanthony_minessale@hotmail.com> GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com<PAYPAL%3Aanthony.minessale@gmail.com> IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org <sip%3A888@conference.freeswitch.org> googletalk:conf+888@conference.freeswitch.org<googletalk%3Aconf%2B888@conference.freeswitch.org> pstn:+19193869900
participants (2)
-
Anthony Minessale
-
Doug Albrechtsen