HI All, pretty basic question and I feel a bit stupid asking this, but what are the prerequisites for the INFO to be displayed when <action application="info"/> is called in a dialplan? ie are there requirements on the loglevel, does the INFO command have to be put at a certain place in the dialplan etc? The reason i ask is that I have a dialplan and the <action application="info"/> is not getting triggered on the fs_cli output. Is there some other debbugging level that needs to be set? Thanks!
If you press F8 (or do /log 7), you will see what the dialplan is executing, try to see if you see the info app in there And, your global loglevel has to be <= INFO too... fsctl loglevel debug Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca On 17-Nov-09, at 9:53 PM, Mark Campbell-Smith wrote:
HI All,
pretty basic question and I feel a bit stupid asking this, but what are the prerequisites for the INFO to be displayed when <action application="info"/> is called in a dialplan?
ie are there requirements on the loglevel, does the INFO command have to be put at a certain place in the dialplan etc?
The reason i ask is that I have a dialplan and the <action application="info"/> is not getting triggered on the fs_cli output. Is there some other debbugging level that needs to be set?
Thanks!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I had console loglevel set to DEBUG, so that should be fine. And I do see that FS is executing the exact extension where I have put the INFO application - still no info on the console.... I'm using FreeSWITCH Version 1.0.trunk (15490) On Wed, Nov 18, 2009 at 4:56 PM, Mathieu Rene <mrene_lists@avgs.ca> wrote:
If you press F8 (or do /log 7), you will see what the dialplan is executing, try to see if you see the info app in there
And, your global loglevel has to be <= INFO too... fsctl loglevel debug
Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca
On 17-Nov-09, at 9:53 PM, Mark Campbell-Smith wrote:
HI All,
pretty basic question and I feel a bit stupid asking this, but what are the prerequisites for the INFO to be displayed when <action application="info"/> is called in a dialplan?
ie are there requirements on the loglevel, does the INFO command have to be put at a certain place in the dialplan etc?
The reason i ask is that I have a dialplan and the <action application="info"/> is not getting triggered on the fs_cli output. Is there some other debbugging level that needs to be set?
Thanks!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Console loglevel only sets the loglevel on the console, not on fs_cli or other event_socket client programs. You have to do /log 7 on fs_cli. fsctl loglevel is the global system loglevel, if its at warning, you wont see anything below warning ANYWHERE (console/event socket log files) Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca On 17-Nov-09, at 10:05 PM, Mark Campbell-Smith wrote:
I had console loglevel set to DEBUG, so that should be fine.
And I do see that FS is executing the exact extension where I have put the INFO application - still no info on the console....
I'm using FreeSWITCH Version 1.0.trunk (15490)
On Wed, Nov 18, 2009 at 4:56 PM, Mathieu Rene <mrene_lists@avgs.ca> wrote:
If you press F8 (or do /log 7), you will see what the dialplan is executing, try to see if you see the info app in there
And, your global loglevel has to be <= INFO too... fsctl loglevel debug
Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca
On 17-Nov-09, at 9:53 PM, Mark Campbell-Smith wrote:
HI All,
pretty basic question and I feel a bit stupid asking this, but what are the prerequisites for the INFO to be displayed when <action application="info"/> is called in a dialplan?
ie are there requirements on the loglevel, does the INFO command have to be put at a certain place in the dialplan etc?
The reason i ask is that I have a dialplan and the <action application="info"/> is not getting triggered on the fs_cli output. Is there some other debbugging level that needs to be set?
Thanks!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
ahha... great. Thanks Mathieu. On Wed, Nov 18, 2009 at 5:08 PM, Mathieu Rene <mrene_lists@avgs.ca> wrote:
Console loglevel only sets the loglevel on the console, not on fs_cli or other event_socket client programs. You have to do /log 7 on fs_cli.
fsctl loglevel is the global system loglevel, if its at warning, you wont see anything below warning ANYWHERE (console/event socket log files)
Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca
On 17-Nov-09, at 10:05 PM, Mark Campbell-Smith wrote:
I had console loglevel set to DEBUG, so that should be fine.
And I do see that FS is executing the exact extension where I have put the INFO application - still no info on the console....
I'm using FreeSWITCH Version 1.0.trunk (15490)
On Wed, Nov 18, 2009 at 4:56 PM, Mathieu Rene <mrene_lists@avgs.ca> wrote:
If you press F8 (or do /log 7), you will see what the dialplan is executing, try to see if you see the info app in there
And, your global loglevel has to be <= INFO too... fsctl loglevel debug
Mathieu Rene Avant-Garde Solutions Inc Office: + 1 (514) 664-1044 x100 Cell: +1 (514) 664-1044 x200 mrene@avgs.ca
On 17-Nov-09, at 9:53 PM, Mark Campbell-Smith wrote:
HI All,
pretty basic question and I feel a bit stupid asking this, but what are the prerequisites for the INFO to be displayed when <action application="info"/> is called in a dialplan?
ie are there requirements on the loglevel, does the INFO command have to be put at a certain place in the dialplan etc?
The reason i ask is that I have a dialplan and the <action application="info"/> is not getting triggered on the fs_cli output. Is there some other debbugging level that needs to be set?
Thanks!
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (2)
-
Mark Campbell-Smith
-
Mathieu Rene