Hi All I am trying to get mod_xml_cdr working My webserver is like www.xxx.com at port 80 the test web site is working fine with perl http://www.xxx.com/PERL/test3.pl I have mod_xml_cdr and mod_xml_curl modules loaded. several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl 2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [ http://www.xxx.com/PERL/cdr.pl] 3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/> 4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80 <http://www.xxx.com/>" bindings="dialplan"/> again my webserver www.xxx.com at port 80 Thx deiro
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote:
several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80" bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring Good luck, Gabe
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error. On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote:
several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80" bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring
Good luck, Gabe
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks for the replies I made some research and run series of tests. I am using perl+FCGI (fastcgi) and my http server is working fine as tested with multiple perl scripts. I think the problem is handling the CGI within the cdr.pl file(obtained from freeswitch wiki) so, how can I change below script to use with FCGI instead of CGI::Simple use XML::Simple; # Get from CPAN use CGI::Simple; # Get from CPAN use Data::Dumper; # dump into a place for further review open(FILEOUT,">",'/tmp/fs-xml-cdr2.log'); print FILEOUT "Test successful..\n"; cloe(FILEOUT); # dump into a place for further review open(FILEOUT,">>",'/tmp/fs-xml-cdr.log'); # $cgi object has handy methods my $cgi = new CGI::Simple; Thx deniro On Mon, May 23, 2011 at 3:50 AM, Steven Ayre <steveayre@gmail.com> wrote:
2-- when dialing into conference, getting following from fs_cli
[ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error.
On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote:
several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80<http://www.xxx.com/> " bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring
Good luck, Gabe
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
http://search.cpan.org/~markstos/CGI.pm-3.54/lib/CGI/Fast.pm That module looks like it is built on top of FCGI and gives you a CGI-like interface. -MC On Tue, May 24, 2011 at 10:12 PM, deniro <ayhkor@gmail.com> wrote:
Thanks for the replies I made some research and run series of tests. I am using perl+FCGI (fastcgi) and my http server is working fine as tested with multiple perl scripts. I think the problem is handling the CGI within the cdr.pl file(obtained from freeswitch wiki)
so, how can I change below script to use with FCGI instead of CGI::Simple
use XML::Simple; # Get from CPAN use CGI::Simple; # Get from CPAN use Data::Dumper; # dump into a place for further review open(FILEOUT,">",'/tmp/fs-xml-cdr2.log'); print FILEOUT "Test successful..\n"; cloe(FILEOUT); # dump into a place for further review open(FILEOUT,">>",'/tmp/fs-xml-cdr.log'); # $cgi object has handy methods my $cgi = new CGI::Simple;
Thx deniro
On Mon, May 23, 2011 at 3:50 AM, Steven Ayre <steveayre@gmail.com> wrote:
2-- when dialing into conference, getting following from fs_cli
[ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error.
On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote:
several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80<http://www.xxx.com/> " bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring
Good luck, Gabe
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Thanks a lot. The link was a good help. we tested with sample code in the link and no more 502 errors with the sample code in the link. We tried to make changes in our cdr.pl perl (using mod_xml_cdr) program accordingly we made good progres in generatng xml file, however we are still getting 502 errors from cdr.pl. Probably something else in our cdr.pl giving us that, we are still trying to figure out what piece is that. In the mean time, in generated xml we see a line like this * <^[7]\d{4}\$>77555</^[7]\d{4}\$>* and looks like this coming from *$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$');* and because of above xml line I am unable to parse xml. (above tested with changes and changes reflect on xml line) why do you think above $session->playAndGetDigits is producing xml line like "<^[7]\d{4}\$>77555</^[7]\d{4}\$>" any ideas appreciated. why and how to fix it. thx again deniro-- On Wed, May 25, 2011 at 5:33 PM, Michael Collins <msc@freeswitch.org> wrote:
http://search.cpan.org/~markstos/CGI.pm-3.54/lib/CGI/Fast.pm
That module looks like it is built on top of FCGI and gives you a CGI-like interface.
-MC
On Tue, May 24, 2011 at 10:12 PM, deniro <ayhkor@gmail.com> wrote:
Thanks for the replies I made some research and run series of tests. I am using perl+FCGI (fastcgi) and my http server is working fine as tested with multiple perl scripts. I think the problem is handling the CGI within the cdr.pl file(obtained from freeswitch wiki)
so, how can I change below script to use with FCGI instead of CGI::Simple
use XML::Simple; # Get from CPAN use CGI::Simple; # Get from CPAN use Data::Dumper; # dump into a place for further review open(FILEOUT,">",'/tmp/fs-xml-cdr2.log'); print FILEOUT "Test successful..\n"; cloe(FILEOUT); # dump into a place for further review open(FILEOUT,">>",'/tmp/fs-xml-cdr.log'); # $cgi object has handy methods my $cgi = new CGI::Simple;
Thx deniro
On Mon, May 23, 2011 at 3:50 AM, Steven Ayre <steveayre@gmail.com> wrote:
2-- when dialing into conference, getting following from fs_cli
[ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error.
On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote:
several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80<http://www.xxx.com/> " bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring
Good luck, Gabe
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
*$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$'); *It looks like this usage is wrong. You're giving 9 parameters but the Wiki seems to say it's only 8. It looks like it's using the 9th as a channel variable name to store the result in. Try this: *$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", '^[7]\d{4}\$');* -Steve On 26 May 2011 06:22, deniro <ayhkor@gmail.com> wrote:
Thanks a lot. The link was a good help. we tested with sample code in the link and no more 502 errors with the sample code in the link.
We tried to make changes in our cdr.pl perl (using mod_xml_cdr) program accordingly we made good progres in generatng xml file, however we are still getting 502 errors from cdr.pl. Probably something else in our cdr.pl giving us that, we are still trying to figure out what piece is that.
In the mean time, in generated xml we see a line like this * <^[7]\d{4}\$>77555</^[7]\d{4}\$> * and looks like this coming from *$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$');* and because of above xml line I am unable to parse xml. (above tested with changes and changes reflect on xml line)
why do you think above $session->playAndGetDigits is producing xml line like "<^[7]\d{4}\$>77555</^[7]\d{4}\$>"
any ideas appreciated. why and how to fix it.
thx again deniro--
On Wed, May 25, 2011 at 5:33 PM, Michael Collins <msc@freeswitch.org>wrote:
http://search.cpan.org/~markstos/CGI.pm-3.54/lib/CGI/Fast.pm
That module looks like it is built on top of FCGI and gives you a CGI-like interface.
-MC
On Tue, May 24, 2011 at 10:12 PM, deniro <ayhkor@gmail.com> wrote:
Thanks for the replies I made some research and run series of tests. I am using perl+FCGI (fastcgi) and my http server is working fine as tested with multiple perl scripts. I think the problem is handling the CGI within the cdr.pl file(obtained from freeswitch wiki)
so, how can I change below script to use with FCGI instead of CGI::Simple
use XML::Simple; # Get from CPAN use CGI::Simple; # Get from CPAN use Data::Dumper; # dump into a place for further review open(FILEOUT,">",'/tmp/fs-xml-cdr2.log'); print FILEOUT "Test successful..\n"; cloe(FILEOUT); # dump into a place for further review open(FILEOUT,">>",'/tmp/fs-xml-cdr.log'); # $cgi object has handy methods my $cgi = new CGI::Simple;
Thx deniro
On Mon, May 23, 2011 at 3:50 AM, Steven Ayre <steveayre@gmail.com>wrote:
2-- when dialing into conference, getting following from fs_cli
[ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error.
On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote:
several questions; 1-- do I really need to load mod_xml_curl for mod_xml_cdr? trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
2-- when dialing into conference, getting following from fs_cli [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
4-- if I need mod_xml_curl (question 1) what should this line be like in xml_curl.conf.xml? <param name="gateway-url" value="http://www.xxx.com:80<http://www.xxx.com/> " bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring
Good luck, Gabe
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
tried it and looks like that XML line is gone. but now I am unable to join to conference by making suggested change. played around it, no luck to join conference.... it doesnt get DTMF as I check from fs_cli *switch_cpp.cpp:1177 Got dtmf: -- ..* * * I also checked usage and it seems with 8 parameters. I can't remember how I got it with 9 parameters before. Anyway, It works(joins conference) with 9 parametes only. I am using freeswitch 1.0.6 with ubuntu 10.04 can that usage be different from version to version? thx On Thu, May 26, 2011 at 2:34 AM, Steven Ayre <steveayre@gmail.com> wrote:
*$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$');
* It looks like this usage is wrong. You're giving 9 parameters but the Wiki seems to say it's only 8. It looks like it's using the 9th as a channel variable name to store the result in.
Try this:
*$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", '^[7]\d{4}\$');*
-Steve
On 26 May 2011 06:22, deniro <ayhkor@gmail.com> wrote:
Thanks a lot. The link was a good help. we tested with sample code in the link and no more 502 errors with the sample code in the link.
We tried to make changes in our cdr.pl perl (using mod_xml_cdr) program accordingly we made good progres in generatng xml file, however we are still getting 502 errors from cdr.pl. Probably something else in our cdr.pl giving us that, we are still trying to figure out what piece is that.
In the mean time, in generated xml we see a line like this * <^[7]\d{4}\$>77555</^[7]\d{4}\$> * and looks like this coming from *$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$');* and because of above xml line I am unable to parse xml. (above tested with changes and changes reflect on xml line)
why do you think above $session->playAndGetDigits is producing xml line like "<^[7]\d{4}\$>77555</^[7]\d{4}\$>"
any ideas appreciated. why and how to fix it.
thx again deniro--
On Wed, May 25, 2011 at 5:33 PM, Michael Collins <msc@freeswitch.org>wrote:
http://search.cpan.org/~markstos/CGI.pm-3.54/lib/CGI/Fast.pm
That module looks like it is built on top of FCGI and gives you a CGI-like interface.
-MC
On Tue, May 24, 2011 at 10:12 PM, deniro <ayhkor@gmail.com> wrote:
Thanks for the replies I made some research and run series of tests. I am using perl+FCGI (fastcgi) and my http server is working fine as tested with multiple perl scripts. I think the problem is handling the CGI within the cdr.plfile(obtained from freeswitch wiki)
so, how can I change below script to use with FCGI instead of CGI::Simple
use XML::Simple; # Get from CPAN use CGI::Simple; # Get from CPAN use Data::Dumper; # dump into a place for further review open(FILEOUT,">",'/tmp/fs-xml-cdr2.log'); print FILEOUT "Test successful..\n"; cloe(FILEOUT); # dump into a place for further review open(FILEOUT,">>",'/tmp/fs-xml-cdr.log'); # $cgi object has handy methods my $cgi = new CGI::Simple;
Thx deniro
On Mon, May 23, 2011 at 3:50 AM, Steven Ayre <steveayre@gmail.com>wrote:
2-- when dialing into conference, getting following from fs_cli > [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server > [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error.
On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote: > several questions; > 1-- do I really need to load mod_xml_curl for mod_xml_cdr? > trying to figure out if my problem is with cdr or with curl
No, they are not functionally related... easy to get mixed up because they both use HTTP and XML. One does not depend on the other. However, you *can* configure mod_xml_cdr (or any other module) with mod_xml_curl.
> 2-- when dialing into conference, getting following from fs_cli > [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server > [http://www.xxx.com/PERL/cdr.pl]
There isn't a lot of info to work on here, but I'd look at your web setup and not FS for the mix-up (particularly true as "HTTP Error 502" means you have a bad gateway).
> 3-- I am not quiete sure if this line is correct in xml_cdr.conf.xml > <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/>
Looks good to me, but check it with the wiki: http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration
> 4-- if I need mod_xml_curl (question 1) > what should this line be like in xml_curl.conf.xml? > <param name="gateway-url" value="http://www.xxx.com:80<http://www.xxx.com/> " > bindings="dialplan"/>
This one is a little tricker to get right. Again, the wiki is might be the best place to reference: http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring
Good luck, Gabe
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
1.0.6 is ancient. Get on the latest git - it is more stable and has more features and fewer bugs than 1.0.6. -MC On Thu, May 26, 2011 at 4:50 PM, deniro <ayhkor@gmail.com> wrote:
tried it and looks like that XML line is gone. but now I am unable to join to conference by making suggested change. played around it, no luck to join conference.... it doesnt get DTMF as I check from fs_cli *switch_cpp.cpp:1177 Got dtmf: -- ..* * * I also checked usage and it seems with 8 parameters. I can't remember how I got it with 9 parameters before. Anyway, It works(joins conference) with 9 parametes only. I am using freeswitch 1.0.6 with ubuntu 10.04 can that usage be different from version to version? thx
On Thu, May 26, 2011 at 2:34 AM, Steven Ayre <steveayre@gmail.com> wrote:
*$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$');
* It looks like this usage is wrong. You're giving 9 parameters but the Wiki seems to say it's only 8. It looks like it's using the 9th as a channel variable name to store the result in.
Try this:
*$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", '^[7]\d{4}\$');*
-Steve
On 26 May 2011 06:22, deniro <ayhkor@gmail.com> wrote:
Thanks a lot. The link was a good help. we tested with sample code in the link and no more 502 errors with the sample code in the link.
We tried to make changes in our cdr.pl perl (using mod_xml_cdr) program accordingly we made good progres in generatng xml file, however we are still getting 502 errors from cdr.pl. Probably something else in our cdr.pl giving us that, we are still trying to figure out what piece is that.
In the mean time, in generated xml we see a line like this * <^[7]\d{4}\$>77555</^[7]\d{4}\$> * and looks like this coming from *$PIN_temp=$session->playAndGetDigits(1, 5, 1, 8000, "#", "conference/conf-pin.wav", "ivr/ivr-that_was_an_invalid_entry.wav", "", '^[7]\d{4}\$');* and because of above xml line I am unable to parse xml. (above tested with changes and changes reflect on xml line)
why do you think above $session->playAndGetDigits is producing xml line like "<^[7]\d{4}\$>77555</^[7]\d{4}\$>"
any ideas appreciated. why and how to fix it.
thx again deniro--
On Wed, May 25, 2011 at 5:33 PM, Michael Collins <msc@freeswitch.org>wrote:
http://search.cpan.org/~markstos/CGI.pm-3.54/lib/CGI/Fast.pm
That module looks like it is built on top of FCGI and gives you a CGI-like interface.
-MC
On Tue, May 24, 2011 at 10:12 PM, deniro <ayhkor@gmail.com> wrote:
Thanks for the replies I made some research and run series of tests. I am using perl+FCGI (fastcgi) and my http server is working fine as tested with multiple perl scripts. I think the problem is handling the CGI within the cdr.plfile(obtained from freeswitch wiki)
so, how can I change below script to use with FCGI instead of CGI::Simple
use XML::Simple; # Get from CPAN use CGI::Simple; # Get from CPAN use Data::Dumper; # dump into a place for further review open(FILEOUT,">",'/tmp/fs-xml-cdr2.log'); print FILEOUT "Test successful..\n"; cloe(FILEOUT); # dump into a place for further review open(FILEOUT,">>",'/tmp/fs-xml-cdr.log'); # $cgi object has handy methods my $cgi = new CGI::Simple;
Thx deniro
On Mon, May 23, 2011 at 3:50 AM, Steven Ayre <steveayre@gmail.com>wrote:
> 2-- when dialing into conference, getting following from fs_cli > > [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server > > [http://www.xxx.com/PERL/cdr.pl] > > There isn't a lot of info to work on here, but I'd look at your web > setup and not FS for the mix-up (particularly true as "HTTP Error > 502" > means you have a bad gateway). >
Check your web server logs - there may be some useful message. It sounds like the cgi-bin/perl handler hasn't been configured correctly, the script isn't executable, or it's not returning some headers. Try visiting the URL in your webbrowser (you won't be submitting a CDR but you can at least check the script runs without an (unexpected) error.
On 23 May 2011 07:38, Gabriel Gunderson <gabe@gundy.org> wrote:
> On Sun, May 22, 2011 at 6:27 PM, deniro <ayhkor@gmail.com> wrote: > > several questions; > > 1-- do I really need to load mod_xml_curl for mod_xml_cdr? > > trying to figure out if my problem is with cdr or with curl > > No, they are not functionally related... easy to get mixed up because > they both use HTTP and XML. One does not depend on the other. > However, > you *can* configure mod_xml_cdr (or any other module) with > mod_xml_curl. > > > > > 2-- when dialing into conference, getting following from fs_cli > > [ERR] mod_xml_cdr.c:365 Got error [502] posting to web server > > [http://www.xxx.com/PERL/cdr.pl] > > There isn't a lot of info to work on here, but I'd look at your web > setup and not FS for the mix-up (particularly true as "HTTP Error > 502" > means you have a bad gateway). > > > > > 3-- I am not quiete sure if this line is correct in > xml_cdr.conf.xml > > <param name="url" value="http://www.xxx.com/PERL/cdr.pl"/> > > Looks good to me, but check it with the wiki: > http://wiki.freeswitch.org/wiki/Mod_xml_cdr#Sample_Configuration > > > > > 4-- if I need mod_xml_curl (question 1) > > what should this line be like in xml_curl.conf.xml? > > <param name="gateway-url" value="http://www.xxx.com:80<http://www.xxx.com/> > " > > bindings="dialplan"/> > > This one is a little tricker to get right. Again, the wiki is might > be the best place to reference: > http://wiki.freeswitch.org/wiki/Mod_xml_curl#Configuring > > > > Good luck, > Gabe > > _______________________________________________ > FreeSWITCH-users mailing list > FreeSWITCH-users@lists.freeswitch.org > http://lists.freeswitch.org/mailman/listinfo/freeswitch-users > UNSUBSCRIBE: > http://lists.freeswitch.org/mailman/options/freeswitch-users > http://www.freeswitch.org >
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE: http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
participants (4)
-
deniro
-
Gabriel Gunderson
-
Michael Collins
-
Steven Ayre