Hello all, If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin. Its perfect . I want to know is there a way to use some limit on that ip ? Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip. How can i set limit on profile level or set from dialplan. I tried to do but it didn't work . Any help or advice will be highly appreciated Thanking all Nabeel.
Hello Ahmad, we do it the following way * we have a background job, which periodically (every 1-2 sec) connects via esl to fo Freeswitch and gets it's channel informations. Then we do some calculations based on e.g. call state, domain, profile, ip, other customer information (in our case it's multi-tenant) * for each calculation, we set a memcache key to a specific value (a new call is allowed / not allowed) * then, for a new call, we query the memcache key (mod_memcache) in the dialplan and decide, what to do with this call But - of course - there will also be some other ways to do this, dependent on your specific goal. Best regards Peter On 06/20/17 11:16, Nabeel Ahmad wrote:
Hello all, If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin. Its perfect . I want to know is there a way to use some limit on that ip ? Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip. How can i set limit on profile level or set from dialplan. I tried to do but it didn't work .
Any help or advice will be highly appreciated Thanking all Nabeel.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- With kind regards Peter Steinbach Telefaks Services GmbH mailto:lists (att) telefaks.de Internet: www.telefaks.de
Hi Peter, So far i also came to something similar. i've all ips in db with status enable/disable. on channel answer event , same ip toggles its status. then updating profile rtp-ip variable and rescan profile. and on destroy event again update status in Db and rescan the profile. If i ignore frequent calls to DB , still i am not getting what will happen if all ips are used . How will i restrict calls more then IPs i've . (can't touch global session limit as there are other profiles where i dont want to limit anything ). So i thought to ask there must be some better way to do it. @Ken : each profile with their own RTP-iP can also work , how to limit number of calls per profile ? On Tue, Jun 20, 2017 at 6:53 PM, Peter Steinbach <lists@telefaks.de> wrote:
Hello Ahmad,
we do it the following way
- we have a background job, which periodically (every 1-2 sec) connects via esl to fo Freeswitch and gets it's channel informations. Then we do some calculations based on e.g. call state, domain, profile, ip, other customer information (in our case it's multi-tenant) - for each calculation, we set a memcache key to a specific value (a new call is allowed / not allowed) - then, for a new call, we query the memcache key (mod_memcache) in the dialplan and decide, what to do with this call
But - of course - there will also be some other ways to do this, dependent on your specific goal.
Best regards Peter
On 06/20/17 11:16, Nabeel Ahmad wrote:
Hello all, If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin. Its perfect . I want to know is there a way to use some limit on that ip ? Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip. How can i set limit on profile level or set from dialplan. I tried to do but it didn't work .
Any help or advice will be highly appreciated Thanking all Nabeel.
_________________________________________________________________________ Professional FreeSWITCH Consulting Services:consulting@freeswitch.orghttp://www.freeswitchsolutions.com
Official FreeSWITCH Siteshttp://www.freeswitch.orghttp://confluence.freeswitch.orghttp://www.cluecon....
FreeSWITCH-users mailing listFreeSWITCH-users@lists.freeswitch.orghttp://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-usershttp://www.frees...
-- With kind regards Peter Steinbach
Telefaks Services GmbHmailto:lists <lists> (att) telefaks.de Internet: www.telefaks.de
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
https://freeswitch.org/confluence/display/FREESWITCH/mod_dptools%3A+Limit once you have it on a profile you can limit on the profile name using the built in limit framework… this doesn’t work with the multi-rtpip setup as there is no way to indicate which one is to be used before calling bridge From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Nabeel Ahmad Sent: Tuesday, June 20, 2017 9:12 AM To: FreeSWITCH Users Help <freeswitch-users@lists.freeswitch.org> Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address Hi Peter, So far i also came to something similar. i've all ips in db with status enable/disable. on channel answer event , same ip toggles its status. then updating profile rtp-ip variable and rescan profile. and on destroy event again update status in Db and rescan the profile. If i ignore frequent calls to DB , still i am not getting what will happen if all ips are used . How will i restrict calls more then IPs i've . (can't touch global session limit as there are other profiles where i dont want to limit anything ). So i thought to ask there must be some better way to do it. @Ken : each profile with their own RTP-iP can also work , how to limit number of calls per profile ? On Tue, Jun 20, 2017 at 6:53 PM, Peter Steinbach <lists@telefaks.de <mailto:lists@telefaks.de> > wrote: Hello Ahmad, we do it the following way * we have a background job, which periodically (every 1-2 sec) connects via esl to fo Freeswitch and gets it's channel informations. Then we do some calculations based on e.g. call state, domain, profile, ip, other customer information (in our case it's multi-tenant) * for each calculation, we set a memcache key to a specific value (a new call is allowed / not allowed) * then, for a new call, we query the memcache key (mod_memcache) in the dialplan and decide, what to do with this call But - of course - there will also be some other ways to do this, dependent on your specific goal. Best regards Peter On 06/20/17 11:16, Nabeel Ahmad wrote: Hello all, If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin. Its perfect . I want to know is there a way to use some limit on that ip ? Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip. How can i set limit on profile level or set from dialplan. I tried to do but it didn't work . Any help or advice will be highly appreciated Thanking all Nabeel. _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org -- With kind regards Peter Steinbach Telefaks Services GmbH mailto:lists (att) telefaks.de <http://telefaks.de> Internet: www.telefaks.de <http://www.telefaks.de> _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org <mailto:consulting@freeswitch.org> http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org <mailto:FreeSWITCH-users@lists.freeswitch.org> http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Nabeel Ahmad Sent: Tuesday, June 20, 2017 4:16 AM To: freeswitch-users@lists.freeswitch.org Subject: [Freeswitch-users] Call limit on RTP-IP Address Hello all, If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin. Its perfect . I want to know is there a way to use some limit on that ip ? Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip. How can i set limit on profile level or set from dialplan. I tried to do but it didn't work . Any help or advice will be highly appreciated Thanking all Nabeel.
Is this multi-IP config expected to work this way or it's eventuality/bug? On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
Its never expected to work this WAY Nor its a Bug. Its a kind of feature request. As FS is a flexible product which allows to do things in many ways , trying to find better approach to do it. On Tue, Jun 20, 2017 at 7:17 PM, Serge S. Yuriev <me@nevian.org> wrote:
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounc es@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently. -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address Is this multi-IP config expected to work this way or it's eventuality/bug? On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
I mean if we can define multiple IPs at all. I was under impression parser uses only one last defined. On 20/06/17 17:40, Ken Rice wrote:
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Serge S. Yuriev Lead VoIP engineer
No Defining multiple RTP IPs has been there for a while.... you don’t define them in different lines, the parser will filter out previous ones, you define them all together <param name="rtp-ip" value1.2.3.4,1.2.3.5,1.2.3.6,1.2.3.7"/> The stack will then round robin them. This feature was added several years ago so that FreeSWITCH can handle the required RTP load in traffic flows that can exceed that of 1Gig-E network connections while only using 1 SIP Profile for traffic. It's still useful although less of a requirement with 10GigE coming down in price. (you can now find managed 48port 10GE switches, NICs and Cables on the secondary market for a combined cost under $200/port now. -----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 10:35 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address I mean if we can define multiple IPs at all. I was under impression parser uses only one last defined. On 20/06/17 17:40, Ken Rice wrote:
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
-- Serge S. Yuriev Lead VoIP engineer _________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Umm...I am on limit page since Morning . limit on any user , outbound gateway all is working well. they are all in dialplan . How can i limit inbound profile this i still can't figure from the link given. And one question for rtp-ip value as i was doing it some other way . If i do like you have mentioned ,sofia replies with this sdp . *<param name="rtp-ip" value="192.168.1.1,192.168.1.2,192.168.1.3" />* o=FreeSWITCH 1497955081 1497955082 IN IP4 192.168.1.1,192.168.1.2,192.168.1.4 s=FreeSWITCH *c=IN IP4 192.168.1.1,192.168.1.2,192.168.1.4 * I am not sure if this is valid sdp attribute or not. I am doing like this <param name="rtp-ip"value="192.168.1.1"/> <param name="rtp-ip value="192.168.1.2"/> <param name="rtp-ip value="192.168.1.3" /> Which on each call offers one ip in sdp like this . o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.3 s=FreeSWITCH c=IN IP4 192.168.1.3 and this on another call . o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.1 s=FreeSWITCH c=IN IP4 192.168.1.1 On Tue, Jun 20, 2017 at 8:52 PM, Ken Rice <krice@freeswitch.org> wrote:
No Defining multiple RTP IPs has been there for a while.... you don’t define them in different lines, the parser will filter out previous ones, you define them all together
<param name="rtp-ip" value1.2.3.4,1.2.3.5,1.2.3.6,1.2.3.7"/>
The stack will then round robin them. This feature was added several years ago so that FreeSWITCH can handle the required RTP load in traffic flows that can exceed that of 1Gig-E network connections while only using 1 SIP Profile for traffic. It's still useful although less of a requirement with 10GigE coming down in price. (you can now find managed 48port 10GE switches, NICs and Cables on the secondary market for a combined cost under $200/port now.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users- bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 10:35 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
I mean if we can define multiple IPs at all. I was under impression parser uses only one last defined.
On 20/06/17 17:40, Ken Rice wrote:
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
-- Serge S. Yuriev Lead VoIP engineer
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Its not possible. Maybe file a bounty. On Tue, Jun 20, 2017 at 2:44 PM Nabeel Ahmad <nabeel.10.ahmed@gmail.com> wrote:
Umm...I am on limit page since Morning . limit on any user , outbound gateway all is working well. they are all in dialplan . How can i limit inbound profile this i still can't figure from the link given.
And one question for rtp-ip value as i was doing it some other way . If i do like you have mentioned ,sofia replies with this sdp .
*<param name="rtp-ip" value="192.168.1.1,192.168.1.2,192.168.1.3" />*
o=FreeSWITCH 1497955081 1497955082 IN IP4 192.168.1.1,192.168.1.2,192.168.1.4 s=FreeSWITCH *c=IN IP4 192.168.1.1,192.168.1.2,192.168.1.4 *
I am not sure if this is valid sdp attribute or not.
I am doing like this <param name="rtp-ip"value="192.168.1.1"/> <param name="rtp-ip value="192.168.1.2"/> <param name="rtp-ip value="192.168.1.3" />
Which on each call offers one ip in sdp like this . o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.3 s=FreeSWITCH c=IN IP4 192.168.1.3
and this on another call .
o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.1 s=FreeSWITCH c=IN IP4 192.168.1.1
On Tue, Jun 20, 2017 at 8:52 PM, Ken Rice <krice@freeswitch.org> wrote:
No Defining multiple RTP IPs has been there for a while.... you don’t define them in different lines, the parser will filter out previous ones, you define them all together
<param name="rtp-ip" value1.2.3.4,1.2.3.5,1.2.3.6,1.2.3.7"/>
The stack will then round robin them. This feature was added several years ago so that FreeSWITCH can handle the required RTP load in traffic flows that can exceed that of 1Gig-E network connections while only using 1 SIP Profile for traffic. It's still useful although less of a requirement with 10GigE coming down in price. (you can now find managed 48port 10GE switches, NICs and Cables on the secondary market for a combined cost under $200/port now.
-----Original Message----- From: FreeSWITCH-users [mailto: freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 10:35 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
I mean if we can define multiple IPs at all. I was under impression parser uses only one last defined.
On 20/06/17 17:40, Ken Rice wrote:
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
-- Serge S. Yuriev Lead VoIP engineer
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
Hi, Ok call limit per media ip can be achieved in many ways though i was looking some straight FSish method . can we use rtp over tcp ? I know its a bad idea but where extreme udp filtering is done , only way is to work on tcp. So can FS work with coturn to relay media in tcp some how (or any other way )? If have to pay for this will do. On Wed, Jun 21, 2017 at 3:01 AM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Its not possible. Maybe file a bounty.
On Tue, Jun 20, 2017 at 2:44 PM Nabeel Ahmad <nabeel.10.ahmed@gmail.com> wrote:
Umm...I am on limit page since Morning . limit on any user , outbound gateway all is working well. they are all in dialplan . How can i limit inbound profile this i still can't figure from the link given.
And one question for rtp-ip value as i was doing it some other way . If i do like you have mentioned ,sofia replies with this sdp .
*<param name="rtp-ip" value="192.168.1.1,192.168.1.2,192.168.1.3" />*
o=FreeSWITCH 1497955081 1497955082 IN IP4 192.168.1.1,192.168.1.2,192. 168.1.4 s=FreeSWITCH *c=IN IP4 192.168.1.1,192.168.1.2,192.168.1.4 *
I am not sure if this is valid sdp attribute or not.
I am doing like this <param name="rtp-ip"value="192.168.1.1"/> <param name="rtp-ip value="192.168.1.2"/> <param name="rtp-ip value="192.168.1.3" />
Which on each call offers one ip in sdp like this . o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.3 s=FreeSWITCH c=IN IP4 192.168.1.3
and this on another call .
o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.1 s=FreeSWITCH c=IN IP4 192.168.1.1
On Tue, Jun 20, 2017 at 8:52 PM, Ken Rice <krice@freeswitch.org> wrote:
No Defining multiple RTP IPs has been there for a while.... you don’t define them in different lines, the parser will filter out previous ones, you define them all together
<param name="rtp-ip" value1.2.3.4,1.2.3.5,1.2.3.6,1.2.3.7"/>
The stack will then round robin them. This feature was added several years ago so that FreeSWITCH can handle the required RTP load in traffic flows that can exceed that of 1Gig-E network connections while only using 1 SIP Profile for traffic. It's still useful although less of a requirement with 10GigE coming down in price. (you can now find managed 48port 10GE switches, NICs and Cables on the secondary market for a combined cost under $200/port now.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users- bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 10:35 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
I mean if we can define multiple IPs at all. I was under impression parser uses only one last defined.
On 20/06/17 17:40, Ken Rice wrote:
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
______________________________________________________________________ ___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-use rs http://www.freeswitch.org
-- Serge S. Yuriev Lead VoIP engineer
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>*
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 <(919)%20386-9900>
https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
Its possible in theory as there is a spec for it but it would require both ends supporting it and would have to be researched and a price figured out. You can contact consulting@freeswitch.org if you would like. On Thu, Jun 22, 2017 at 3:24 PM, Nabeel Ahmad <nabeel.10.ahmed@gmail.com> wrote:
Hi, Ok call limit per media ip can be achieved in many ways though i was looking some straight FSish method . can we use rtp over tcp ? I know its a bad idea but where extreme udp filtering is done , only way is to work on tcp. So can FS work with coturn to relay media in tcp some how (or any other way )? If have to pay for this will do.
On Wed, Jun 21, 2017 at 3:01 AM, Anthony Minessale < anthony.minessale@gmail.com> wrote:
Its not possible. Maybe file a bounty.
On Tue, Jun 20, 2017 at 2:44 PM Nabeel Ahmad <nabeel.10.ahmed@gmail.com> wrote:
Umm...I am on limit page since Morning . limit on any user , outbound gateway all is working well. they are all in dialplan . How can i limit inbound profile this i still can't figure from the link given.
And one question for rtp-ip value as i was doing it some other way . If i do like you have mentioned ,sofia replies with this sdp .
*<param name="rtp-ip" value="192.168.1.1,192.168.1.2,192.168.1.3" />*
o=FreeSWITCH 1497955081 1497955082 IN IP4 192.168.1.1,192.168.1.2,192.16 8.1.4 s=FreeSWITCH *c=IN IP4 192.168.1.1,192.168.1.2,192.168.1.4 *
I am not sure if this is valid sdp attribute or not.
I am doing like this <param name="rtp-ip"value="192.168.1.1"/> <param name="rtp-ip value="192.168.1.2"/> <param name="rtp-ip value="192.168.1.3" />
Which on each call offers one ip in sdp like this . o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.3 s=FreeSWITCH c=IN IP4 192.168.1.3
and this on another call .
o=FreeSWITCH 1497961414 1497961415 IN IP4 192.168.1.1 s=FreeSWITCH c=IN IP4 192.168.1.1
On Tue, Jun 20, 2017 at 8:52 PM, Ken Rice <krice@freeswitch.org> wrote:
No Defining multiple RTP IPs has been there for a while.... you don’t define them in different lines, the parser will filter out previous ones, you define them all together
<param name="rtp-ip" value1.2.3.4,1.2.3.5,1.2.3.6,1.2.3.7"/>
The stack will then round robin them. This feature was added several years ago so that FreeSWITCH can handle the required RTP load in traffic flows that can exceed that of 1Gig-E network connections while only using 1 SIP Profile for traffic. It's still useful although less of a requirement with 10GigE coming down in price. (you can now find managed 48port 10GE switches, NICs and Cables on the secondary market for a combined cost under $200/port now.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounc es@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 10:35 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
I mean if we can define multiple IPs at all. I was under impression parser uses only one last defined.
On 20/06/17 17:40, Ken Rice wrote:
This is not a bug... there is just no way to select which IP or port is used nor is there an effective way to limit it short of just killing the call due to the way the IP/Port allocation works in the RTP stack currently.
-----Original Message----- From: FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] On Behalf Of Serge S. Yuriev Sent: Tuesday, June 20, 2017 9:17 AM To: freeswitch-users@lists.freeswitch.org Subject: Re: [Freeswitch-users] Call limit on RTP-IP Address
Is this multi-IP config expected to work this way or it's eventuality/bug?
On 20/06/17 17:05, Ken Rice wrote:
Theres no way to limit or select which IP/Port combination is used from the available RTP IP/Port Range in the config you have. The only way to do this would be to create a profile for each IP and then limit the number of calls per profile
*From:* FreeSWITCH-users [mailto:freeswitch-users-bounces@lists.freeswitch.org] *On Behalf Of *Nabeel Ahmad *Sent:* Tuesday, June 20, 2017 4:16 AM *To:* freeswitch-users@lists.freeswitch.org *Subject:* [Freeswitch-users] Call limit on RTP-IP Address
Hello all,
If we assign more then one RTP-IP parameter to a sip profile , they are used in round robin.
Its perfect . I want to know is there a way to use some limit on that ip ?
Say i've 5 ip address listening on box , and i want one concurrent call limit on each media ip.
How can i set limit on profile level or set from dialplan.
I tried to do but it didn't work .
Any help or advice will be highly appreciated
Thanking all
Nabeel.
-- Serge S. Yuriev Lead VoIP engineer
____________________________________________________________
___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-use rs http://www.freeswitch.org
____________________________________________________________
___ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-use rs http://www.freeswitch.org
-- Serge S. Yuriev Lead VoIP engineer
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/ freeswitch-users http://www.freeswitch.org
____________________________________________________________ _____________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬
☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>*
ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 <(919)%20386-9900>
https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
_________________________________________________________________________ Professional FreeSWITCH Consulting Services: consulting@freeswitch.org http://www.freeswitchsolutions.com
Official FreeSWITCH Sites http://www.freeswitch.org http://confluence.freeswitch.org http://www.cluecon.com
FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org
-- Anthony Minessale II ♬ @anthmfs ♬ @FreeSWITCH ♬ ☞ http://freeswitch.org/ ☞ http://cluecon.com/ ☞ http://twitter.com/FreeSWITCH ☞ irc.freenode.net #freeswitch ☞ *http://freeswitch.org/g+ <http://freeswitch.org/g+>* ClueCon Weekly Development Call ☎ sip:888@conference.freeswitch.org ☎ +19193869900 https://www.youtube.com/watch?v=9XXgW34t40s https://www.youtube.com/watch?v=NLaDpGQuZDA
participants (5)
-
Anthony Minessale
-
Ken Rice
-
Nabeel Ahmad
-
Peter Steinbach
-
Serge S. Yuriev