you have to make sure the client also wants to send info On Tue, Sep 21, 2010 at 5:43 PM, DJB International <djbinter@gmail.com> wrote:

When I tried to set the variable dtmf_type=info, or in sip profile parameter dtmf-type=info, would FS send the SIP INFO packet. For instance, if I called an IVR and pressed 2 after the call got answered by the IVR, I was expecting to see the message similar to below, but I did not see it. Is there any other variables that needs to be set?

INFO sip:2143302100@172.17.2.33 SIP/2.0 Via: SIP/2.0/UDP 172.80.2.100:5060 From: <sip:9724401003@172.80.2.100>;tag=43 To: <sip:2143302100@172.17.2.33>;tag=9753.0207 Call-ID: 984072_15401962@172.80.2.100 CSeq: 25634 INFO Supported: 100rel Supported: timer Content-Length: 26 Content-Type: application/dtmf-relay Signal= 2 Duration= 215

Thank you.

_______________________________________________ FreeSWITCH-users mailing list FreeSWITCH-users@lists.freeswitch.org http://lists.freeswitch.org/mailman/listinfo/freeswitch-users UNSUBSCRIBE:http://lists.freeswitch.org/mailman/options/freeswitch-users http://www.freeswitch.org

-- Anthony Minessale II FreeSWITCH http://www.freeswitch.org/ ClueCon http://www.cluecon.com/ Twitter: http://twitter.com/FreeSWITCH_wire AIM: anthm MSN:anthony_minessale@hotmail.com GTALK/JABBER/PAYPAL:anthony.minessale@gmail.com IRC: irc.freenode.net #freeswitch FreeSWITCH Developer Conference sip:888@conference.freeswitch.org googletalk:conf+888@conference.freeswitch.org pstn:+19193869900